Browse
Submit Data
Databases
API
Help

Dataset Information

41 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Investigations of Alkaline and Enzymatic Membrane Cleaning of Ultrafiltration Membranes Fouled by Thermomechanical Pulping Process Water.

ABSTRACT: The pulp and paper industry is one of the most important industrial sectors worldwide, and has considerable potential for the sustainable fractionation of lignocellulosic biomass to provide valuable compounds. Ultrafiltration (UF) is a suitable separation technique for the profitable production of hemicelluloses from process water from thermomechanical pulping (ThMP), but is limited by membrane fouling. Improvements in cleaning protocols and new alternative cleaning agents are required to ensure a long membrane lifetime, and thus a sustainable process. This study, therefore, focuses on the cleaning of polymeric UF membranes after the filtration of ThMP process water, comparing alkaline with enzymatic cleaning agents. The aim was to develop a cleaning procedure that is efficient under mild conditions, resulting in a lower environmental impact. It was not possible to restore the initial permeability of the membrane when cleaning the membrane with enzymes alone, but the permeability was restored when using a two-step cleaning process with enzymes in the first step and an alkaline cleaning agent in the second step. Scanning electron microscopy gave a deeper inside into the cleaning efficiency. Attenuated total reflectance Fourier-transform infrared spectroscopy analysis confirmed that not only polysaccharides, but also extractives are adsorbed onto the membrane surface.

SUBMITTER: Rudolph G

PROVIDER: S-EPMC6316253 | biostudies-literature | 2018 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Chemical Cleaning of Ultrafiltration Membrane Fouled by Humic Substances: Comparison between Hydrogen Peroxide and Sodium Hypochlorite.

Project description:Chemical cleaning is indispensable for the sustainable operation of ultrafiltration (UF) system in water and wastewater treatment. Sodium hypochlorite (NaClO) is an established cleaning agent for membranes subject to organic and microbial fouling, but concerns have been raised about the generation of toxic halogenated by-products during NaClO cleaning. Hydrogen peroxide (H2O2) is a potential "green" cleaning agent that can avoid the formation of halogenated by-products. In this work, cleaning efficacy of H2O2 and NaClO for UF membrane fouled by humic substances (HS) was evaluated under a wide pH range, and change of HS's properties due to reaction with cleaning agents was examined. The cleaning efficacy of H2O2 was lower than that of NaClO at pH 3-9, but it increased to a level (91.4%) comparable with that of NaClO at pH 11. The extents of changes in properties and fouling potential of HS due to reacting with cleaning agents were consistent with their cleaning efficacy. H2O2 treatment at pH 11 significantly increased negative charge of HS molecules, decomposed high-MW molecules, and reduced its fouling potential. Therefore, considering treatment/disposal of cleaning waste and cleaning efficacy, H2O2 cleaning under strong alkaline condition can be a good choice for HS-fouled membrane.

| S-EPMC6678075 | biostudies-literature

Formation of disinfection by-products during sodium hypochlorite cleaning of fouled membranes from membrane bioreactors.

Project description:Periodic chemical cleaning with sodium hypochlorite (NaClO) is essential to restore the membrane permeability in a membrane bioreactor (MBR). However, the chlorination of membrane foulants results in the formation of disinfection by-products (DBPs), which will cause the deterioration of the MBR effluent and increase the antibiotic resistance in bacteria in the MBR tank. In this study, the formation of 14 DBPs during chemical cleaning offouled MBR membrane modules was investigated. Together with the effects of biofilm extracellular polymeric substances (EPS), influences of reaction time, NaClO dosage, initial pH, and cleaning temperature on the DBP formation were investigated. Haloacetic acids (HAAs) and trichloromethane (TCM), composed over 90% of the DBPs, were increasingly accumulated as the NaClO cleaning time extended. By increasing the chlorine dosage, temperature, and pH, the yield of TCM and dichloroacetic acid (DCAA) was increased by up to a factor of 1-14, whereas the yields of haloacetonitriles (HANs) and haloketones (HKs) were decreased. Either decreasing in the chlorine dosage and cleaning temperature or adjusting the pH of cleaning reagents toward acidic or alkaline could effectively reduce the toxic risks caused by DBPs. After the EPS extraction pretreatment, the formation of DBPs was accelerated in the first 12 h due to the damage of biofilm structure. Confocal laser scanning microscopy (CLSM) images showed that EPS, particularly polysaccharides, were highly resistant to chlorine and might be able to protect the cells exposed to chlorination.Electronic supplementary materialSupplementary material is available in the online version of this article at 10.1007/s11783-021-1389-3 and is accessible for authorized users.

| S-EPMC7797181 | biostudies-literature

Isolation and characterization of <i>Sphingomonadaceae</i> from fouled membranes.

Project description:Membrane filtration systems are widely applied for the production of clean drinking water. However, the accumulation of particles on synthetic membranes leads to fouling. Biological fouling (i.e., biofouling) of reverse osmosis and nanofiltration membranes is difficult to control by existing cleaning procedures. Improved strategies are therefore needed. The bacterial diversity on fouled membranes has been studied, especially to identify bacteria with specialized functions and to develop targeted approaches against these microbes. Previous studies have shown that Sphingomonadaceae are initial membrane colonizers that remain dominant while the biofilm develops. Here, we characterized 21 Sphingomonadaceae isolates, obtained from six different fouled membranes, to determine which physiological traits could contribute to colonization of membrane surfaces. Their growth conditions ranged from temperatures between 8 and 42 oC, salinity between 0.0 and 5.0% w/v NaCl, pH from 4 and 10, and all isolates were able to metabolize a wide range of substrates. The results presented here show that Sphingomonadaceae membrane isolates share many features that are uncommon for other members of the Sphingomonadaceae family: all membrane isolates are motile and their tolerance for different temperatures, salt concentrations, and pH is high. Although relative abundance is an indicator of fitness for a whole group, for the Sphingomonadaceae it does not reveal the specific physiological traits that are required for membrane colonization. This study, therefore, adds to more fundamental insights in membrane biofouling.

| S-EPMC6347639 | biostudies-literature

Milk Protein Concentration Using Negatively Charged Ultrafiltration Membranes.

Project description:In this work, milk protein concentrate (MPC) was made using wide-pore negatively charged ultrafiltration membranes. The charged membranes were used for a six-fold volume concentration of skim milk and subsequent diafiltration to mimic the industrial MPC process. The charged 100 kDa membranes had at least a four-fold higher permeate flux at the same protein recovery as unmodified 30 kDa membranes, which are currently used in the dairy industry to make MPC. By placing a negative charge on the surface of an ultrafiltration membrane, the negatively charged proteins were rejected by electrostatic repulsion and not simply size-based sieving. Mass balance models of concentration and diafiltration were developed and the calculations matched the experimental observations. This is the first study to use wide-pore charged tangential-flow membranes for MPC manufacturing. Additionally, a unique mass balance model was applied, which accurately predicted experimental results.

| S-EPMC6165199 | biostudies-literature

Leaching of CuO Nanoparticles from PES Ultrafiltration Membranes.

Project description:Recent studies have incorporated nanoparticles such as CuO, ZnO, and TiO2 to improve membrane physical and filtration properties. However, one of the major concerns about membrane modification with nanoparticles is the possible leaching of the nanoparticles leading to further contamination of source waters. Therefore, this study investigated the effects of prolonged exposure of polyethersulfone (PES) membranes incorporated with CuO nanoparticles, to different cleaning solutions. The cleaned membranes were extensively characterized for both material properties and separation performance, which enabled a closer look at particle leaching effect through a prolonged exposure. After 840 h of exposure, the presence of CuO in the cleaning solutions was confirmed using dynamic light scattering (DLS), energy-dispersive X-ray spectroscopy (EDS), and inductively coupled plasma mass spectroscopy (ICP-MS) techniques. Nanoparticle leaching resulted in changes in membrane hydrophobicity, surface roughness, pure water permeability, and salt rejection properties. Through comparison with the bare PES membranes, it was shown that cleaning solutions also degraded the membrane polymer. However, the marked effect was less pronounced compared to combined leaching of nanoparticles and degradation of the polymer noted with PES membranes incorporated with CuO nanoparticles. Therefore, when membranes incorporated with nanoparticles are used, a polishing step may be required to remove potentially leached nanoparticles. Leached nanoparticles may result in secondary pollution and pose a health risk concern to nontarget organisms. This work provides insights into the stability of nanocomposite membranes, and the achieved results can be extrapolated to other nanoparticles such as TiO2 and ZnO because they possess similar physicochemical behavior.

| S-EPMC8637953 | biostudies-literature

Multiple air-bubble enhanced oil rupture on nanostructured cellulose fabric for easy-oil cleaning fouled in a dry state.

Project description:Nanostructured cellulose fabric with an air-bubble-enhanced anti-oil fouling property is introduced for quick oil-cleaning by water even with the surface fouled by oil before water contact under a dry state. It is very challenging to recover the super-hydrophilicity because once the surface is oil-fouled, it is hard to be re-wetted by water. Anti-oil-fouling under a dry state was realized through two main features of the nanostructured, porous fabric: a low solid fraction with high-aspect-ratio nanostructures significantly increasing the retracting forces, and trapped multiscale air bubbles increasing the buoyancy and backpressure for an oil-layer rupture. The nanostructures were formed on cellulose-based rayon microfibers through selective etching with oxygen plasma, forming a nanoscale open-pore structure. Viscous crude oil fouled on a fabric under a dry state was cleaned by immersion into water owing to a higher water affinity of the rayon material and low solid fraction of the high-aspect-ratio nanostructures. Air bubbles trapped in dry porous fibers and nanostructures promote oil detachment from the fouled sites. The macroscale bubbles add buoyancy on top of the oil droplets, enhancing the oil receding at the oil-water-solid interface, whereas the relatively smaller microscale bubbles induce a backpressure underneath the oil droplets. The oil-proofing fabric was used for protecting underwater conductive sensors, allowing a robot fish to swim freely in oily water.

| S-EPMC6787182 | biostudies-literature

Fractionation of Glycomacropeptide from Whey Using Positively Charged Ultrafiltration Membranes.

Project description:Fractionation of the bovine glycomacropeptide (GMP) from the other proteins in cheese whey was examined using ultrafiltration membranes surface modified to contain positively charged polymer brushes made of polyhexamethylene biguanide. By placing a strong positive charge on a 1000 kDa ultrafiltration membrane and adjusting the pH of whey close to the isoelectric point of GMP, a 14-fold increase in selectivity was observed compared to unmodified membranes. A one stage membrane system gave 90% pure GMP and a three-stage rectification system gave 97% pure GMP. The charged membrane was salt-tolerant up to 40 mS cm-1 conductivity, allowing fractionation of GMP directly from cheese whey without first lowering the whey conductivity by water dilution. Thus, similarly sized proteins that differed somewhat in isoelectric points and were 50?100 fold smaller than the membrane molecular weight cut-off (MWCO), were cleanly fractionated using charged ultrafiltration membranes without water addition. This is the first study to report on the use of salt-tolerant charged ultrafiltration membranes to produce chromatographically pure protein fractions from whey, making ultrafiltration an attractive alternative to chromatography for dairy protein fractionation.

| S-EPMC6210718 | biostudies-literature

Role of pulping process as synergistic treatment on performance of agro-based activated carbons.

Project description:To recommend the beneficial effect of the pulping process on enhancing agro-wastes as precursors for the production of high-performance activated carbons (ACs), different pulping methods (alkali, sulfite and neutral sulfite) were applied on two available Egyptian agriculture by-products (rice straw and sugar cane bagasse), using the one-step pyrolysis method and H3PO4 activating agent. The adsorption performance of the different prepared ACs was evaluated in terms of Iodine Numbers and their sorption properties for removing the methylene blue (MB) from aqueous solutions. The corresponding sorption processes were also analysed using Lagergren first order, pseudo-second order and intraparticle diffusion models. Data revealed that the applied pulping conditions were effective for removing the non-cellulosic constituents of agro-residues. This was demonstrated by the hydrogen/carbon and oxygen/carbon ratios, thermal stability and IR-measurements of the final pulps. These data were effective on the particular sorption properties of RS and SCB-based ACs. Interestingly, the pulping process is a profound modification of the SCB-based fibres, on which it induced a clear increase of the specific surface areas of the corresponding ACs even though they had an impact on the sorption of MB and iodine. These values are superior to the reported data on agro-based ACs with H3PO4 activators. Pulping processes therefore play a dual role in the sorption properties of ACs. The first important role is the impact on the specific surface areas and the second impact is a profound modification of the surface chemistry of the ACs. Therefore, SCB-based ACs can be seen as an economical breakthrough product, and an alternative to the high-cost commercial ACs for the purification of industrial wastewaters.

| S-EPMC6689577 | biostudies-literature

Robust, small diameter hydrophilic nanofibers improve the flux of ultrafiltration membranes.

Project description:In this study, we systematically investigated the flux performance of ultrafiltration (UF) membranes functionalized with randomly-accumulated nanofibers. By electrospinning nanofibers from hydrophobic polysulfone (PSf) and hydrophilic cellulose (CL), we were able to explore the role that bulk nanofiber (NF) layer thickness, individual NF diameter, and intrinsic chemistry have on composite membrane flux. Additional parameters that we systematically tested include the molecular weight cut-off (MWCO) of the base membrane (10, 100, and 200 kDa), flow orientation (cross-flow versus dead-end), and the feed solution (hydrophilic water versus hydrophobic oil). Structurally, the crosslinked PSf nanofibers were more robust than the CL nanofibers, which lead to the PSfNF-UF membranes having a greater flux performance. To decouple the structural robustness from the water affinity of the fibers, we chemically modified the PSf fibers to be hydrophilic and indeed, the flux of these new composite membranes featuring hydrophilic crosslinked nanofibers were superior. In summary, the greatest increase in flux performance arises from the smallest diameter, hydrophilic nanofibers that are mechanically robust (crosslinked). We have demonstrated that electrospun nanofiber layers improve the flux performance of ultrafiltration membranes.

| S-EPMC8486296 | biostudies-literature

Electiveness of agro-pulping process in the sustainable production of black liquor-based activated carbons.

Project description:During the production of paper pulp, the waste water loaded with organic materials from pulping process is discharged. Therefore, water treatment should be performed before disposing of such effluent. The use of such effluent for production of activated carbon will be effective in omitting the wastewater treatment and in obtaining the product required in many industries. In this respect, this paper deals with evaluating the performance of activated carbons (ACs) produced from black liquors (BLs) as by-products from three pulping processes of rice straw (RS) and sugar-cane bagasse (SCB), namely: alkaline, sulfite and neutral sulfite, which are coded SP, SSP and NSP, respectively. Elemental analysis and thermal analysis (TGA and DTGA) are carried out on the BLs, while the surface area (S BET), micro-/mesoporous distribution, adsorption capacity of methylene blue (MB) and iodine (I2-value), as well as Fourier transform infrared spectra (FT-IR) and scanning electron micrograph (SEM) are studied on synthesizing ACs. The optimal pulping approach for achieving BL-based AC, with the following characteristics: specific surface area (S BET) ∼ 921 and 545 m2 g-1, MB adsorption capacity 238 and 370 mg g-1, and I2-value 928 and 1255 mg g-1 of BL-based ACs, are from neutral sulfite pulping of SCB (B-NSP) and RS (RS-NSP), respectively. These finding data are ascribed to the carbon content of BL, as well as greatest total volume (VT 0.786 and 0.701 cm3 g-1) together with decreasing the volume of micropores/total (38 and 48%) of BL-NSP-ACs. It is interesting to note that the AC provided from RS-NSP has greater adsorption capacity for I2 and MB than the AC produced from RS-pulp fibres.

| S-EPMC6549982 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data