A Sharing-Based Approach to Enticing Tourists to Behave More Environmentally Friendly.
Ontology highlight
ABSTRACT:
SUBMITTER: Dolnicar S
PROVIDER: S-EPMC6318704 | biostudies-literature | 2019 Feb
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Micron and nanometer size textured silicate glass surfaces are of interest in consumer electronics, photovoltaics, and biosensing applications. Typically, texturing glass surfaces requires applying a patterned mask or a pre-etching treatment (e.g. sandblasting) on the glass substrate, followed by a mask transferring or etching process using a fluoride-containing compound. The major challenges of such a process are the complexity and cost of masking, and the safety and environmental concerns around the usage and disposal of hydrofluoric acid. Here, we describe a template-free method to construct micron-sized and submicron-sized texture on isotropic glass surfaces in one step. The new texturing mechanisms are well supported by experimental data and peridynamic simulations. With this novel strategy, the etchant uses fluoride-free chemicals such as citric acid to texture silicate glass. Etchant concentration, etch temperature, time, and additives are the primary parameters that dictate the texturing process. Surface feature size and depth can be independently controlled by tuning the leaching and chemical polishing process. We hope this study can trigger more research on novel and more environmentally friendly texturing of isotropic materials.
| S-EPMC8766433 | biostudies-literature
Project description:Superabsorbents starches (SASs) were synthesized and characterized starting from native corn starch, bitter cassava and sweet cassava by graft copolymerization with itaconic acid. Additionally, their swelling behavior was studied both in water and in buffer solutions with different pHs and saline solutions. Their applicability was tested as environmentally friendly fertilizers in the absorption and release of urea, potassium nitrate and ammonium nitrate at different concentrations of fertilizers. The values of swelling at the equilibrium (H∞) in water and different media of the graft copolymers demonstrated their superabsorbent capacity, polyelectrolyte behavior, and smart response to environmental stimuli. The percentage of fertilizer absorbed and released from the SASs was a function of the initial concentration of the fertilizer in the medium. The loading and release of SASs were depended on the initial concentration of the fertilizer in the medium as well as the nature, structure, and morphology of the starch used.
| S-EPMC6862305 | biostudies-literature
Project description:Fungal contamination of surfaces is a global burden, posing a major environmental and public health challenge. A wide variety of antifungal chemical agents are available; however, the side effects of the use of these disinfectants often result in the generation of toxic residues raising major environmental concerns. Herein, atmospheric pressure air plasma generated by a surface barrier discharge (SBD) is presented as an innovative green chemical method for fungal inactivation, with the potential to become an effective replacement for conventional chemical disinfection agents, such as Virkon. Using Aspergillus flavus spores as a target organism, a comparison of plasma based decontamination techniques is reported, highlighting their respective efficiencies and uncovering their underpining inactivation pathways. Tests were performed using both direct gaseous plasma treatment and an indirect treatment using a plasma activated aqueous broth solution (PAB). Concentrations of gaseous ozone and nitrogen oxides were determined with Fourier-transform infrared spectroscopy (FTIR) and Optical emission spectroscopy (OES), whereas hydrogen peroxides, nitrites, nitrates, and pH were measured in PAB. It is demonstrated that direct exposure to the gaseous plasma effluent exhibited superior decontamination efficiency and eliminated spores more effectively than Virkon, a finding attributed to the production of a wide variety of reactive oxygen and nitrogen species within the plasma.
| S-EPMC6727216 | biostudies-literature
Project description:Sewage sludge, produced daily and inherent to urban development, presents problems of disposal that are still challenging today. Its disposal still offers palliative solutions, where the final destination is generally in landfills or, restrictively, to use in agriculture. The synthesis of carbon quantum dots (CQDs) from sewage sludge is a better alternative to use the stock of organic material present in the sludge. The present work aims to produce Carbon quantum dots (CQDs) using principles of green chemistry and to use an alternative raw material intrinsic stock of carbon present in sewage sludge, making its final disposal more sustainable. The material obtained has a core structure mainly composed of sp2 carbon and nitrogen. The surface functional groups containing sulfur, nitrogen, and oxygen of CQDs were investigated using FTIR and TG/DSC coupled FTIR techniques. The CQDs showed a luminescence decay time equivalent to fluorescent compounds and with satisfying quantum yield since no passive/oxidizing agent or material purification process was used. The photoluminescence spectroscopy analysis showed that the CDQs excitation λmax was at 360 nm and caused a λmax emission at 437 nm (CQDsa) and 430 nm (CQDsb). The CQDs obtained showed sizes of 9.69 ± 2.64 nm (CQDsa) and 10.92 ± 2.69 nm (CQDsb). In vitro experiments demonstrated the uptake of CQDs by the endothelial cell line EAhy 926 and their nontoxicity. However, the production of CQDs can be used for the sustainable disposal of sewage sludge.
| S-EPMC9403084 | biostudies-literature
Project description:The promotion of tourists' environmentally responsible behavior (TERB) plays a central role in destination management for sustainability. Based on the stimulus-organism-response framework, this study proposes an integrated model for behavior management by examining the relationship between stimuli (natural environment and availability of infrastructure) and response factors (satisfaction and TERB) through the organism (the emotion of awe). Survey data from 458 tourists visiting Mount Heng in Hunan Province, Southern China, were used to empirically evaluate the proposed framework. The findings demonstrate that the perception of a destination's natural environment positively impacts tourists' sense of awe and satisfaction; the perception of availability of infrastructure positively and significantly influences awe, satisfaction, and TERB; and awe positively impacts satisfaction and TERB. Moreover, the emotion of awe plays a significant mediating role in this proposed model. The theoretical significance of this study and the implications for tourism destinations are discussed.
| S-EPMC8983069 | biostudies-literature
Project description:An electrostatic power generator converts mechanical energy to electrical energy by utilising the principle of variable capacitance. This change in capacitance is usually achieved by varying the gap or overlap between two parallel metallic plates. This paper proposes a novel electrostatic micro power generator where the change in capacitance is achieved by the movement of an aqueous solution of NaCl. A significant change in capacitance is achieved due to the higher than air dielectric constant of water and the Helmholtz double layer capacitor formed by ion separation at the electrode interfaces. The proposed device has significant advantages over traditional electrostatic devices which include low bias voltage and low mechanical frequency of operation. This is critical if the proposed device is to have utility in harvesting power from the environment. A figure of merit exceeding 10000(10(8)μW)/(mm(2)HzV(2)) which is two orders of magnitude greater than previous devices, is demonstrated for a prototype operating at a bias voltage of 1.2 V and a droplet frequency of 6 Hz. Concepts are presented for large scale power harvesting.
| S-EPMC4891717 | biostudies-other
Project description:Environmentally friendly energy storage devices have been fabricated by using functional materials obtained from completely renewable resources. Gelatin, chitosan, casein, guar gum and carboxymethyl cellulose have been investigated as sustainable and low-cost binders within the electrode active material of water-processable symmetric carbon-based supercapacitors. Such binders are selected from natural-derived materials and industrial by-products to obtain economic and environmental benefits. The electrochemical properties of the devices based on the different binders are compared by using cyclic voltammetry, galvanostatic charge/discharge curves and impedance spectroscopy. The fabricated supercapacitors exhibit series resistance lower than a few ohms and values of the specific capacitance ranged between 30 F/g and 80 F/g. The most performant device can deliver ca. 3.6 Wh/kg of energy at a high power density of 3925 W/kg. Gelatin, casein and carboxymethyl cellulose-based devices have shown device stability up to 1000 cycles. Detailed analysis on the charge storage mechanisms (e.g., involving faradaic and non-faradaic processes) at the electrode/electrolyte interface reveals a pseudocapacitance behavior within the supercapacitors. A clear correlation between the electrochemical performances (e.g., cycle stability, capacitance retention, series resistance value, coulombic efficiency) ageing phenomena and charge storage mechanisms within the porous carbon-based electrode have been discussed.
| S-EPMC8746753 | biostudies-literature
Project description:We prepared novel flame retardants with concurrent excellent smoke-suppression properties based on lignin biomass modified by functional groups containing N and P. Each lignin-based flame retardant (Lig) was quantitatively added to a fixed amount of epoxy resin (EP), to make a Lig/EP composite. The best flame retardancy was achieved by a Lig-F/EP composite with elevated P content, achieving a V-0 rating of the UL-94 test and exhibiting excellent smoke suppression, with substantial reduction of total heat release and smoke production (by 46.6 and 53%, respectively). In this work, we characterized the flame retardants and the retardant/EP composites, evaluated their performances, and proposed the mechanisms of flame retardancy and smoke suppression. The charring layer of the combustion residual was analyzed using SEM and Raman spectroscopy to support the proposed mechanisms. Our work provides a feasible method for lignin modification and applications of new lignin-based flame retardants.
| S-EPMC7745397 | biostudies-literature
Project description:The use of chemicals for various purposes in agriculture has numerous consequences, such as the contamination of ecosystems. Thus, nowadays it is perceived that their development should adhere to the principles of green chemistry elaborated by Paul Anastas. Consequently, to create more environment-friendly herbicides, we elaborated a 'green' synthesis method of a series of ionic liquids (ILs) containing cations derived from glycine. The appropriately modified cations were combined with an anion from the group of phenoxy acids, commonly known as 2,4-DP. The products were obtained with high yields, and subsequently, their properties, such as density, viscosity and solubility, were thoroughly examined to elucidate existing structure-property relationships. All ILs were liquids at room temperature, which enabled the elimination of some serious issues associated with solid active forms, such as the polymorphism or precipitation of an active ingredient from spray solution. Additionally, the synthesized compounds were tested under greenhouse conditions, which allowed an assessment of their effectiveness in regulating the growth of oilseed rape, selected as a model dicotyledonous plant. The product comprising a dodecyl chain exhibited the greatest reduction in the fresh weight of plants, significantly surpassing not only a commercially used reference herbicide but also the potassium salt of 2,4-DP.
| S-EPMC9863448 | biostudies-literature
Project description:A large amount of research has been devoted to developing novel superhydrophobic coatings. However, it is still a great challenge to pursuean environmentally friendly method that leads to superhydrophobic coatings. Herein, we demonstrate for the first time, an environmentally friendly method for the preparation of conductive superhydrophobic coatings with sandwich-like structures by using aminoethylaminopropyl polydimethylsiloxane modified waterborne polyurethane (SiWPU) and N-octadecylamine functionalized multi-wall carbon nanotubes. These environmentally friendly coatings with the sheet resistance of 1.1 ± 0.1 kΩ/sq exhibit a high apparent contact angle of 158.1° ± 2° and a low sliding angle below 1°. The influence of the surface texture before and after heat treatment on the wetting properties is discussed. In addition, the coatings can be electrically heated by 3~113 °C with a voltage of 12~72 V, and thus, can be used for deicing. Furthermore, the resulting coatings demonstrate good performance of wear resistance and ultraviolet resistance, which will have broad application potential in harsh environments.
| S-EPMC6415204 | biostudies-literature