Dataset Information

Activated carbon as effective cathode material in iron-free Electro-Fenton process: Integrated H2O2 electrogeneration, activation, and pollutants adsorption.

ABSTRACT: Major challenges for effective implementation of the Electro-Fenton (EF) water treatment process are that conventional efficient cathodes are relatively expensive, and H2O2 activation by Fe2+ may cause secondary pollution. Herein, we propose a low-cost activated carbon/stainless steel mesh (ACSS) composite cathode, where the SS mesh distributes the current and the AC simultaneously supports H2O2 electrogeneration, H2O2 activation, and organic compounds (OCs) adsorption. The oxygen-containing groups on the AC function as oxygen reduction reaction (ORR) sites for H2O2 electrogeneration; while the porous configuration supply sufficient reactive surface area for ORR. 8.9 mg/L H2O2 was obtained with 1.5 g AC at 100 mA under neutral pH without external O2 supply. The ACSS electrode is also effective for H2O2 activation to generate ?OH, especially under neutral pH. Adsorption shows limited influence on both H2O2 electrogeneration and activation. The iron-free EF process enabled by the ACSS cathode is effective for reactive blue 19 (RB19) degradation. 61.5% RB19 was removed after 90 min and 74.3% TOC was removed after 720 min. Moreover, long-term stability test proved its relatively stable performance. Thus, the ACSS electrode configuration is promising for practical and cost-effective EF process for transformation of OCs in water.

SUBMITTER: Zhou W

PROVIDER: S-EPMC6322679 | biostudies-literature | 2019 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Activated carbon as effective cathode material in iron-free Electro-Fenton process: Integrated H2O2 electrogeneration, activation, and pollutants adsorption.

Zhou Wei W Rajic Ljiljana L Chen Long L Kou Kaikai K Ding Yani Y Meng Xiaoxiao X Wang Yan Y Mulaw Biruk B Gao Jihui J Qin Yukun Y Alshawabkeh Akram N AN

Electrochimica acta 20181112

Major challenges for effective implementation of the Electro-Fenton (EF) water treatment process are that conventional efficient cathodes are relatively expensive, and H2O2 activation by Fe2+ may cause secondary pollution. Herein, we propose a low-cost activated carbon/stainless steel mesh (ACSS) composite cathode, where the SS mesh distributes the current and the AC simultaneously supports H2O2 electrogeneration, H2O2 ...[more]

PMID: 30631212

Similar Datasets

Project description:The adsorption behavior of an organic dye, metanil yellow (My), from water using micro-nano silica particles (MNSPs) was investigated. MCM-41-like (Mobil Composition of Matter No. 41) MNSPs were synthesized using tetraethoxy orthosilicate as a silica source and hexadecyltrimethylammonium bromide (CTAB) as a surfactant under basic conditions. Comparative studies were performed to assess the adsorption behaviors of the organic dye using the as-synthesized MCM-41 before the removal of CTAB and MCM-41, either after one, two, and three times of chemical etching or after calcination. My was adsorbed more effectively from water on the as-synthesized MCM-41 without the removal of the surfactant than on MCM-41 after the removal of the surfactant by chemical etching or calcination. In addition, MCM-41 after removing the surfactant by one-time chemical etching in the presence of hydrochloric acid also showed better adsorption of My from water than MCM-41 after removing the surfactant by further two and three times of chemical etching or calcination. For comparison, other kinds of dye molecules with different chemical structures such as methylene blue (Mb) and rhodamine B (Rb) were also used to check the possibility of adsorption of various dyes by the CTAB-supported MNSPs. To better understand the reason behind the adsorption phenomena, detailed studies on the kinetics and thermodynamics of adsorption of the MNSPs were performed. Excellent adsorption of My was observed at concentrations up to 100 mg L-1 at 25 °C, whereas the adsorption was lower at higher concentrations of the My dye. Furthermore, enhanced My dye adsorption was observed at higher concentrations by increasing the adsorption temperature. It can be concluded that the MNSPs exhibited efficient adsorption of My, when the MNSPs are used without the removal of the surfactant and any further modifications, suggesting that the surfactant played key roles in the effective adsorption of the anionic dye. The as-synthesized MCM-41 was, however, not a good adsorbent for cationic dyes such as Mb and Rb.

Dataset Information

Activated carbon as effective cathode material in iron-free Electro-Fenton process: Integrated H2O2 electrogeneration, activation, and pollutants adsorption.

Publications

Activated carbon as effective cathode material in iron-free Electro-Fenton process: Integrated H<sub>2</sub>O<sub>2</sub> electrogeneration, activation, and pollutants adsorption.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure