Dataset Information

Laser-Induced Periodic Surface Structures (LIPSS) on Heavily Boron-Doped Diamond for Electrode Applications.

ABSTRACT: Diamond is known as a promising electrode material in the fields of cell stimulation, energy storage (e.g., supercapacitors), (bio)sensing, catalysis, etc. However, engineering its surface and electrochemical properties often requires costly and complex procedures with addition of foreign material (e.g., carbon nanotube or polymer) scaffolds or cleanroom processing. In this work, we demonstrate a novel approach using laser-induced periodic surface structuring (LIPSS) as a scalable, versatile, and cost-effective technique to nanostructure the surface and tune the electrochemical properties of boron-doped diamond (BDD). We study the effect of LIPSS on heavily doped BDD and investigate its application as electrodes for cell stimulation and energy storage. We show that quasi-periodic ripple structures formed on diamond electrodes laser-textured with a laser accumulated fluence of 0.325 kJ/cm² (800 nm wavelength) displayed a much higher double-layer capacitance of 660 ?F/cm² than the as-grown BDD (20 ?F/cm²) and that an increased charge-storage capacity of 1.6 mC/cm² (>6-fold increase after laser texturing) and a low impedance of 2.74 ? cm² turn out to be appreciable properties for cell stimulation. Additional morphological and structural characterization revealed that ripple formation on heavily boron-doped diamond (2.8 atom % [B]) occurs at much lower accumulated fluences than the 2 kJ/cm² typically reported for lower doping levels and that the process involves stronger graphitization of the BDD surface. Finally, we show that the exposed interface between sp² and sp³ carbon layers (i.e. the laser-ablated diamond surface) revealed faster kinetics than the untreated BDD in both ferrocyanide and RuHex mediators, which can be used for electrochemical (bio)sensing. Overall, our work demonstrates that LIPSS is a powerful single-step tool for the fabrication of surface-engineered diamond electrodes with tunable material, electrochemical, and charge-storage properties.

SUBMITTER: Sartori AF

PROVIDER: S-EPMC6326536 | biostudies-literature | 2018 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Laser-Induced Periodic Surface Structures (LIPSS) on Heavily Boron-Doped Diamond for Electrode Applications.

Sartori André F AF Orlando Stefano S Bellucci Alessandro A Trucchi Daniele M DM Abrahami Shoshan S Boehme Thijs T Hantschel Thomas T Vandervorst Wilfried W Buijnsters Josephus G JG

ACS applied materials & interfaces 20181129 49

Diamond is known as a promising electrode material in the fields of cell stimulation, energy storage (e.g., supercapacitors), (bio)sensing, catalysis, etc. However, engineering its surface and electrochemical properties often requires costly and complex procedures with addition of foreign material (e.g., carbon nanotube or polymer) scaffolds or cleanroom processing. In this work, we demonstrate a novel approach using laser-induced periodic surface structuring (LIPSS) as a scalable, versatile, an ...[more]

PMID: 30431259

Similar Datasets

Project description:The detailed studies of the surface structure of synthetic boron-doped diamond single crystals using both conventional X-ray and synchrotron nano- and microbeam diffraction, as well as atomic force microscopy and micro-Raman spectroscopy, were carried out to clarify the recently discovered features in them. The arbitrary shaped islands towering above the (111) diamond surface are formed at the final stage of the crystal growth. Their lateral dimensions are from several to tens of microns and their height is from 0.5 to 3 μm. The highly nonequilibrium conditions of crystal growth enhance the boron solubility and, therefore, lead to an increase of the boron concentrations in the islands on the surface up to 1022 cm-3, eventually generating significant stresses in them. The stress in the islands is found to be the volumetric tensile stress. This conclusion is based on the stepwise shift of the diamond Raman peak toward lower frequencies from 1328 to 1300 cm-1 in various islands and on the observation of the shift of three low-intensity reflections at 2-theta Bragg angles of 41.468°, 41.940° and 42.413° in the X-ray diffractogram to the left relative to the (111) diamond reflection at 2theta = 43.93°. We believe that the origin of the stepwise tensile stress is a discrete change in the distances between boron-carbon layers with the step of 6.18 Å. This supposition explains also the stepwise (step of 5 cm-1) behavior of the diamond Raman peak shift. Two approaches based on the combined application of Raman scattering and X-ray diffraction data allowed determination of the values of stresses both in lateral and normal directions. The maximum tensile stress in the direction normal to the surface reaches 63.6 GPa, close to the fracture limit of diamond, equal to 90 GPa along the [111] crystallographic direction. The presented experimental results unambiguously confirm our previously proposed structural model of the boron-doped diamond containing two-dimensional boron-carbon nanosheets and bilayers.

Dataset Information

Laser-Induced Periodic Surface Structures (LIPSS) on Heavily Boron-Doped Diamond for Electrode Applications.

Publications

Laser-Induced Periodic Surface Structures (LIPSS) on Heavily Boron-Doped Diamond for Electrode Applications.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets