Preparation of diglycolamide polymer modified silica and its application as adsorbent for rare earth ions.
Ontology highlight
ABSTRACT:
SUBMITTER: Liu Z
PROVIDER: S-EPMC6327932 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Using pomelo peel's pulp (PPP) as raw material, a new chemically modified PPP was prepared by the process of fermentation, cooking, freeze-drying, and so on. The adsorbent has been characterized by EDS, IR, BET and SEM. The factors of different adsorption conditions such as pH value, adsorption temperature, mass of adsorbent, adsorption time and initial concentration of UO2 2+ were investigated. The adsorption mechanism was explored by adsorption thermodynamics and kinetics experiments. The results indicate that the pH value is 6.0, the dosage of adsorbent is 500 mg l-1, the temperature is 50°C and the adsorption time is 90 min, which is the best adsorption condition. When the initial concentration of UO2 2+ is 35 mg l-1, the adsorbed amount of uranyl ions by the modified PPP adsorbent can reach 42.733 mg g-1, 26.8% higher than the adsorption amount of unmodified adsorbent (31.276 mg g-1), which is obviously enhanced. The kinetic and thermodynamic experiments show that the adsorption process is in good agreement with the pseudo second-order kinetics model, that it is an endothermic reaction, and the reaction is spontaneous. The adsorption process is entropy-dominated. The Freundlich adsorption isotherm can describe the adsorption process more accurately.
| S-EPMC6458375 | biostudies-literature
Project description:Rare earth elements (REEs) and their compounds are essential for rapidly developing modern technologies. These materials are especially critical in the area of green/sustainable energy; however, only very high-purity fractions are appropriate for these applications. Yet, achieving efficient REE separation and purification in an economically and environmentally effective way remains a challenge. Moreover, current extraction technologies often generate large amounts of undesirable wastes. In that perspective, the development of selective, reusable, and extremely efficient sorbents is needed. Among numerous ligands used in the liquid-liquid extraction (LLE) process, the diglycolamide-based (DGA) ligands play a leading role. Although these ligands display notable extraction performance in the liquid phase, their extractive chemistry is not widely studied when such ligands are tethered to a solid support. A detailed understanding of the relationship between chemical structure and function (i.e., extraction selectivity) at the molecular level is still missing although it is a key factor for the development of advanced sorbents with tailored selectivity. Herein, a series of functionalized mesoporous silica (KIT-6) solid phases were investigated as sorbents for the selective extraction of REEs. To better understand the extraction behavior of these sorbents, different spectroscopic techniques (solid-state NMR, X-ray photoelectron spectroscopy, XPS, and Fourier transform infrared spectroscopy, FT-IR) were implemented. The obtained spectroscopic results provide useful insights into the chemical environment and reactivity of the chelating ligand anchored on the KIT-6 support. Furthermore, it can be suggested that depending on the extracted metal and/or structure of the ligand and its attachment to KIT-6, different functional groups (i.e., C═O, N-H, or silanols) act as the main adsorption centers and preferentially capture targeted elements, which in turn may be associated with the different selectivity of the synthesized sorbents. Thus, by determining how metals interact with different supports, we aim to better understand the solid-phase extraction process of hybrid (organo)silica sorbents and design better extraction materials.
| S-EPMC7760098 | biostudies-literature
Project description:Woven fabrics were bestowed with antibacterial property by the simple adsorption of rare-earth metal ions, and the underlying mechanism was investigated using electron spin resonance (ESR) spectroscopy. The adsorption of Ce3+ ions on wool, silk, and cotton fabrics resulted in significant inhibition of Staphylococcus aureus (a gram-positive bacterium), with maximum antibacterial activities (viable bacterial count compared to the reference) of 4.7, 5.8, and 5.2, respectively. Even after 50 wash cycles, the values remained at 3.9, 2.9, and 4.8, respectively. The adsorption of La3+ and Gd3+ ions on wool fabrics also resulted in antibacterial activities of 5.8 and 5.9, respectively. In addition, wool adsorbed with Ce3+ exhibits a satisfactory antibacterial activity of 6.2 against Escherichia coli (a gram-negative bacterium). Such bacterial inhibition is attributed to Fenton reactions between the adsorbed rare-earth ions and hydrogen peroxide (H2O2) produced during bacterial metabolism, as determined from the ESR spectra collected using the spin trap method in the presence of H2O2. The safety of cerium nitrate was also investigated, and no significant issues arose, indicating that it was a safe antibacterial agent. This facile method of imparting antibacterial properties to natural fabrics may be useful for preventing infections in humans.Supplementary informationThe online version contains supplementary material available at 10.1007/s11696-021-01999-9.
| S-EPMC8853069 | biostudies-literature
Project description:To obtained fungal resources with excellent tolerance and accumulation capacity to rare earth yttrium ions (Y3+), rare earth ore samples were collected and used for microbial screening. A fungus hyper-resistant to Y3+ was obtained and the effects of the fungus in three physiological states (growth process, mycelial pellets with physiological activity and the fungus powder after being ground) on the Y3+ accumulation were investigated. The Y3+ resistant fungus was identified as Penicillium sp. ZD28, and its mycelium pellets (about 1 mm in diameter) showed poor ability to accumulate Y3+ with an adsorption capacity of less than 81 μmol/g. However, the fungus was able to remove 99% of Y3+ during the growth process, at an initial concentration of less than 600 μM. Bioaccumulation of Y was observed on the cell surface of the ZD28 strain by elemental mapping using scanning electron microscopy-energy dispersive X-ray spectroscopy. The adsorbent (the dry fungal powder) had a remarkable adsorption property for Y3+ that was greater than 455 μmol/g in conditions of 465 μM < [Y3+] < 6382 μM. Penicillium sp. ZD28 has major potential applications in the accumulation of yttrium group rare earth ions. This research has formed a theoretical foundation for the application of this biological method to extract rare earth ions in the mining and smelting of yttrium group rare earth elements.
| S-EPMC6997312 | biostudies-literature
Project description:The motivation of this work is to create luminescent rare earth/polymer films with outstanding water-resistance and superhydrophobicity. Specifically, the emulsion polymerization of styrene leads to core particles. Then core-shell-structured polymer nanoparticles are synthesized by copolymerization of styrene and acrylic acid on the core surface. The coordination reaction between carboxylic groups and rare earth ions (Eu(3+) and Tb(3+)) generates uniform spherical rare earth/polymer nanoparticles, which are subsequently complexed with PTFE microparticles to obtain micro-/nano-scaled PTFE/rare earth films with hierarchical rough morphology. The films exhibit large water contact angle up to 161° and sliding angle of about 6°, and can emit strong red and green fluorescence under UV excitation. More surprisingly, it is found that the films maintain high fluorescence intensity after submersed in water and even in aqueous salt solution for two days because of the excellent water repellent ability of surfaces.
| S-EPMC5263856 | biostudies-literature
Project description:In this work, a porous hydrogel-based adsorbent for metal ions was prepared through the copolymerization of acrylic acid and 2-hydroxyethyl methacrylate using a high internal phase emulsion (HIPE) method. Stretched molecular chains in the hydrogel ensure the excellent accessibility of functional sites by the metal ions. A highly open cellular structure endows the P(AANa-co-HEMA) gel with high transport rates as a promising adsorbent. Adsorption properties were investigated by three isotherm models and two kinetic models. X-ray photoelectron spectroscopy analysis proved a chelating interaction between -COO- and metal ions. The adsorption capacity reached 630 mg·g-1 for Pb2+ under 303 K and a 400 μg·mL-1 initial concentration. The results show that the as-prepared PolyHIPE-based P(AANa-co-HEMA) gel possesses an open cellular structure, high adsorption capacity, and high selectivity for Pb2+.
| S-EPMC7439275 | biostudies-literature
Project description:Rare earth metal doped silica nanoparticles have significant advantages over traditional organic dyes and quantum dots. Silsesquioxanes are promising precursors in the production of silica nanoparticles by thermolysis, due to their structural similarities with silica materials. This manuscript describes the production of a new Eu3+-based metallasilsesquioxane species and its use as a single source precursor in the thermolytic production of luminescent rare earth metal doped silica nanoparticles with characteristic emission in the visible region of the spectrum.
| S-EPMC5381092 | biostudies-literature
Project description:The demand for rare earth metal increases rapidly in the modern high-tech industry and therefore the accumulation of rare earth metal ions from an aqueous environment becomes a significant concern worldwide. In this paper, a water-recyclable chitosan-based La3+-imprinted thermoresponsive hydrogel (CLIT) was prepared to accumulate La3+ from solution. The CLIT was characterized by DSC, FITR, Raman spectroscopy, XPS, and SEM, which revealed obvious reversible thermosensitivity and imprinted sites of La3+ ions. An adsorption capacity of 112.21 mg/g to La3+ ions was achieved on CLIT under its optimum adsorption conditions (pH 5, 50 °C, 60 min). The adsorption could be well illustrated by second-order kinetics and Freundlich isotherm models. The La3+-adsorbed CLIT could be recycled only by rinsing with 10 °C cold water, with a desorption rate of 96.72%. After ten cycles of adsorption-desorption, CLIT retained good adsorption capability. In the solution containing six ions, the adsorption coefficients kLa3+/Mn+ of CLIT were 2.04-3.51 times that of non-imprinted hydrogel, with kLa3+/Y3+, kLa3+/Gd3+, kLa3+/Al3+, kLa3+/Fe3+ and kLa3+/Cu2+ being 1.67, 2.04, 3.15, 2.72 and 4.84, respectively.
| S-EPMC9505209 | biostudies-literature
Project description:Carbonatites and associated rocks are the main source of rare earth elements (REEs), metals essential to modern technologies. REE mineralization occurs in hydrothermal assemblages within or near carbonatites, suggesting aqueous transport of REE. We conducted experiments from 1200°C and 1.5 GPa to 200°C and 0.2 GPa using light (La) and heavy (Dy) REE, crystallizing fluorapatite intergrown with calcite through dolomite to ankerite. All experiments contained solutions with anions previously thought to mobilize REE (chloride, fluoride, and carbonate), but REEs were extensively soluble only when alkalis were present. Dysprosium was more soluble than lanthanum when alkali complexed. Addition of silica either traps REE in early crystallizing apatite or negates solubility increases by immobilizing alkalis in silicates. Anionic species such as halogens and carbonates are not sufficient for REE mobility. Additional complexing with alkalis is required for substantial REE transport in and around carbonatites as a precursor for economic grade-mineralization.
| S-EPMC7546697 | biostudies-literature
Project description:A molecular precursor approach to titania (anatase) nanopowders modified with different amounts of rare-earth elements (REEs: Eu, Sm, and Y) was developed using the interaction of REE nitrates with titanium alkoxides by a two-step solvothermal-combustion method. The nature of an emerging intermetallic intermediate was revealed unexpectedly for the applied conditions via a single-crystal study of the isolated bimetallic isopropoxide nitrate complex [Ti2Y(iPrO)9(NO3)2], a nonoxo-substituted compound. Powders of the final reaction products were characterized by powder X-ray diffraction, scanning electron microscopy-energy-dispersive spectroscopy, Fourier transform infrared, X-ray photoelectron spectroscopy, Raman spectroscopy, and photoluminescence (PL). The addition of REEs stabilized the anatase phase up to ca. 700 °C before phase transformation into rutile became evident. The photocatalytic activity of titania modified with Eu3+ and Sm3+ was compared with that of Degussa P25 titania as the control. PL studies indicated the incorporation of Eu and Sm cations into titania (anatase) at lower annealing temperatures (500 °C), but an exclusion to the surface occurred when the annealing temperature was increased to 700 °C. The efficiency of the modified titania was inferior to the control titania while illuminated within narrow wavelength intervals (445-465 and 510-530 nm), but when subjected to a wide range of visible radiation, the Eu3+- and Sm3+-modified titania outperformed the control, which was attributed both to doping of the band structure of TiO2 with additional energy levels and to the surface chemistry of the REE-modified titania.
| S-EPMC8493554 | biostudies-literature