Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Coupled Resonance Enhanced Modulation for a Graphene-Loaded Metamaterial Absorber.

ABSTRACT: A graphene-loaded metamaterial absorber is investigated in the mid-infrared region. The light-graphene interaction is greatly enhanced by virtue of the coupled resonance through a cross-shaped slot. The absorption peaks show a significant blueshift with increasing Fermi level, enabling a wide range of tunability for the absorber. A simple circuit model well explains and predicts this modulation behavior. Our proposal may find applications in a variety of areas such as switching, sensing, modulating, and biochemical detecting.

SUBMITTER: Xiao D

PROVIDER: S-EPMC6342740 | biostudies-literature | 2019 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Coupled Resonance Enhanced Modulation for a Graphene-Loaded Metamaterial Absorber.

Xiao Dong D Liu Qiang Q Lei Lei L Sun Yiling Y Ouyang Zhengbiao Z Tao Keyu K

Nanoscale research letters 20190122 1

A graphene-loaded metamaterial absorber is investigated in the mid-infrared region. The light-graphene interaction is greatly enhanced by virtue of the coupled resonance through a cross-shaped slot. The absorption peaks show a significant blueshift with increasing Fermi level, enabling a wide range of tunability for the absorber. A simple circuit model well explains and predicts this modulation behavior. Our proposal may find applications in a variety of areas such as switching, sensing, modulat ...[more]

PMID: 30671732

Similar Datasets

Gain-Enhanced Metamaterial Absorber-Loaded Monopole Antenna for Reduced Radar Cross-Section and Back Radiation.

Project description:This paper proposes a gain-enhanced metamaterial (MM) absorber-loaded monopole antenna that reduces both radar cross-section and back radiation. To demonstrate the proposed idea, we designed a wire monopole antenna and an MM absorber. The MM absorber comprised lumped elements of subwavelength unit cells and achieved 90% absorbance bandwidth from 2.42-2.65 GHz. For low-profile configurations, the MM absorber was loaded parallel to and 10 mm from the monopole antenna, corresponding to 0.09 ?0 at 2.7 GHz. The monopole antenna resonated at 2.7 GHz with a 3.71 dBi peak gain and 2.65 GHz and 6.46 dBi peak gain, before and after loading the MM absorber, respectively. Therefore, including the MM absorber increased peak gain by 2.7 dB and reduced back radiation by 15 dB. The proposed antenna radar cross-section was reduced by 2 dB compared with a monopole antenna with an artificial magnetic conductor.

| S-EPMC7085057 | biostudies-literature

Realization of Bidirectional, Bandwidth-Enhanced Metamaterial Absorber for Microwave Applications.

Project description:The ever-increasing interest towards metamaterial absorbers owes to its remarkable features such as ultra-thin nature and design flexibility. Subduing the inherent narrow bandwidth of such absorbers is the prime goal in metamaterial absorber research, as this can widen the applications areas. A greater challenge is to construct bidirectional absorber, which provides direction-insensitive absorption, as most of the existing designs exhibit single sided absorption due to the complete metal film used in the design. This work presents the realization of a bidirectional, bandwidth-enhanced metamaterial absorber with basic elements such as strips and squares optimized to have adjacent resonances leading to a bandwidth-enhanced absorption. The structural evolution of the constituent metallic components towards the formation of bandwidth-enhanced absorption is described. The bidirectional absorber exhibits more than 90% absorption between 13.40 GHz and 14.25 GHz from the two incident directions. The mechanism of absorption is studied with the surface current analysis and the effective parameters of the structure. The choice of the metallic components with four-fold rotation symmetry renders the proposed design to be polarization independent and wide-angle receptive. The numerical studies are verified experimentally at microwave frequencies, which shows a good agreement between them.

| S-EPMC6624316 | biostudies-literature

Modes Coupling Analysis of Surface Plasmon Polaritons Based Resonance Manipulation in Infrared Metamaterial Absorber.

Project description:Surface plasmon polaritons (SPPs) and standing wave modes provide interesting and exotic properties for infrared metamaterial absorbers. Coupling of these modes promises further development in this field but restricted by the complexity of modes analysis. In this work, we investigate the general phenomenon of modes coupling supported by a metal (with grating)-dielectric-metal sandwich structure based on rigorous coupled-wave analysis (RCWA) method and experiment results. Through the analysis of fundamental modes, a new approach based on the boundary conditions is introduced to reveal the coupling mechanism and the corresponding resonance shifting phenomenon with simple but rigorous derivations. The strong coupling between SPPs excited on the dielectric-metal interfaces and rigorous modes of standing waves in the dielectric layer can be manipulated to improve the detection sensitivity of sensors and emissivity efficiency of infrared emitters.

| S-EPMC5387402 | biostudies-literature

High Quality Factor, High Sensitivity Metamaterial Graphene-Perfect Absorber Based on Critical Coupling Theory and Impedance Matching.

Project description:By means of critical coupling and impedance matching theory, we have numerically simulated the perfect absorption of monolayer graphene. Through the critical coupling effect and impedance matching, we studied a perfect single-band absorption of the monolayer graphene and obtained high quality factor (Q-factor = 664.2) absorption spectrum which has an absorbance close to 100% in the near infrared region. The position of the absorption spectrum can be adjusted by changing the ratio between the radii of the elliptic cylinder air hole and the structural period. The sensitivity of the absorber can be achieved S = 342.7 nm/RIU (RIU is the per refractive index unit) and FOM = 199.2 (FOM is the figure of merit), which has great potential for development on biosensors. We believe that our research will have good application prospects in graphene photonic devices and optoelectronic devices.

| S-EPMC7022528 | biostudies-literature

Ultrathin tunable terahertz absorber based on MEMS-driven metamaterial.

Project description:The realization of high-performance tunable absorbers for terahertz frequencies is crucial for advancing applications such as single-pixel imaging and spectroscopy. Based on the strong position sensitivity of metamaterials' electromagnetic response, we combine meta-atoms that support strongly localized modes with suspended flat membranes that can be driven electrostatically. This design maximizes the tunability range for small mechanical displacements of the membranes. We employ a micro-electro-mechanical system technology and successfully fabricate the devices. Our prototype devices are among the best-performing tunable THz absorbers demonstrated to date, with an ultrathin device thickness (~1/50 of the working wavelength), absorption varying between 60% and 80% in the initial state when the membranes remain suspended, and fast switching speed (~27??s). The absorption is tuned by an applied voltage, with the most marked results achieved when the structure reaches the snap-down state. In this case, the resonance shifts by >200% of the linewidth (14% of the initial resonance frequency), and the absolute absorption modulation measured at the initial resonance can reach 65%. The demonstrated approach can be further optimized and extended to benefit numerous applications in THz technology.

| S-EPMC6445006 | biostudies-literature

Conceptual-based design of an ultrabroadband microwave metamaterial absorber.

Project description:By introducing metallic ring structural dipole resonances in the microwave regime, we have designed and realized a metamaterial absorber with hierarchical structures that can display an averaged -19.4 dB reflection loss (∼99% absorption) from 3 to 40 GHz. The measured performance is independent of the polarizations of the incident wave at normal incidence, while absorption at oblique incidence remains considerably effective up to 45°. We provide a conceptual basis for our absorber design based on the capacitive-coupled electrical dipole resonances in the lateral plane, coupled to the standing wave along the incident wave direction. To realize broadband impedance matching, resistive dissipation of the metallic ring is optimally tuned by using the approach of dispersion engineering. To further extend the absorption spectrum to an ultrabroadband range, we employ a double-layer self-similar structure in conjunction with the absorption of the diffracted waves at the higher end of the frequency spectrum. The overall thickness of the final sample is 14.2 mm, only 5% over the theoretical minimum thickness dictated by the causality limit.

| S-EPMC8433515 | biostudies-literature

Toward an Ultra-Wideband Hybrid Metamaterial Based Microwave Absorber.

Project description:In this paper, we propose a novel design of an ultra-wideband hybrid microwave absorber operating in the frequency range between 2 GHz and 18 GHz. This proposed hybrid absorber is composed of two different layers that integrate a multiband metamaterial absorber and a lossy dielectric layer. The metamaterial absorber consists of a periodic pattern that is composed of an arrangement of different scales of coupled resonators and a metallic ground plane, and the dielectric layer is made of epoxy foam composite loaded with low weight percentage (0.075 wt.%) of 12 mm length carbon fibers. The numerical results show a largely expanded absorption bandwidth that ranges from 2.6 GHz to 18 GHz with incident angles between 0° and 45° and for both transverse electric and transverse magnetic waves. The measurements confirm that absorption of this hybrid based metamaterial absorber exceeds 90% within the above-mentioned frequency range and it may reach an absorption rate of 99% for certain frequency ranges. The proposed idea offers a further step in developing new electromagnetic absorbers, which will impact a broad range of applications.

| S-EPMC7601967 | biostudies-literature

Metamaterial Absorber for Electromagnetic Waves in Periodic Water Droplets.

Project description:Perfect metamaterial absorber (PMA) can intercept electromagnetic wave harmful for body in Wi-Fi, cell phones and home appliances that we are daily using and provide stealth function that military fighter, tank and warship can avoid radar detection. We reported new concept of water droplet-based PMA absorbing perfectly electromagnetic wave with water, an eco-friendly material which is very plentiful on the earth. If arranging water droplets with particular height and diameter on material surface through the wettability of material surface, meta-properties absorbing electromagnetic wave perfectly in GHz wide-band were shown. It was possible to control absorption ratio and absorption wavelength band of electromagnetic wave according to the shape of water droplet-height and diameter- and apply to various flexible and/or transparent substrates such as plastic, glass and paper. In addition, this research examined how electromagnetic wave can be well absorbed in water droplets with low electrical conductivity unlike metal-based metamaterials inquiring highly electrical conductivity. Those results are judged to lead broad applications to variously civilian and military products in the future by providing perfect absorber of broadband in all products including transparent and bendable materials.

| S-EPMC4564857 | biostudies-literature

Miniaturization for ultrathin metamaterial perfect absorber in the VHF band.

Project description:An efficient resolution for ultrathin metamaterial perfect absorber (MPA) is proposed and demonstrated in the VHF radio band (30-300 MHz). By adjusting the lumped capacitors and the through vertical interconnects, the absorber is miniaturized to be only λ/816 and λ/84 for its thickness and periodicity with respect to the operating wavelength (at 102 MHz), respectively. The detailed simulation and calculation show that the MPA can maintain an absorption rate over 90% in a certain range of incident angle and with a wide variation of capacitance. Additionally, we utilized the advantages of the initial single-band structure to realize a nearly perfect dual-band absorber in the same range. The results were confirmed by both simulation and experiment at oblique incidence angles up to 50°. Our work is expected to contribute to the actualization of future metamaterial-based devices working at radio frequency.

| S-EPMC5361105 | biostudies-literature

A proposal of a perfect graphene absorber with enhanced design and fabrication tolerance.

Project description:We propose a novel device structure for the perfect absorption of a one-sided lightwavve illumination, which consists of a high-contrast grating (HCG) and an evanescently coupled slab with an absorbing medium (graphene). The operation principle and design process of the proposed structure are analyzed using the coupled mode theory (CMT), which is confirmed by the rigorous coupled wave analysis (RCWA). According to the CMT analysis, in the design of the proposed perfect absorber, the HCG, functioning as a broadband reflector, and the lossy slab structure can be optimized separately. In addition, we have more design parameters than conditions to satisfy; that is, we have more than enough degrees of freedom in the device design. This significantly relieves the complexity of the perfect absorber design. Moreover, in the proposed perfect absorber, most of the incident wave is confined in the slab region with strong field enhancement, so that the absorption performance is very tolerant to the variation of the design parameters near the optimal values for the perfect absorption. It has been demonstrated numerically that absorption spectrum tuning over a wider wavelength range of ~300 nm is possible, keeping significantly high maximum absorption (>95%). It is also shown that the proposed perfect absorber outperforms the previously proposed scheme in all aspects.

| S-EPMC5500504 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data