Dataset Information

A circular echo planar sequence for fast volumetric fMRI.

ABSTRACT: PURPOSE:To demonstrate a circular EPI (CEPI) sequence as well as a generalized EPI reconstruction for fast fMRI with parallel imaging acceleration. METHODS:The CEPI acquisition was constructed using variable readout lengths and maximum ramp sampling as well as blipped-CAIPI z-gradient encoding for simultaneous multislice (SMS) and 3D volumetric imaging. A signal equation model with constant and linear phase terms was used to iteratively reconstruct images with low ghosting. Simulation, phantom, and human imaging experiments including audio/visual fMRI were performed at 3T using a 52-channel coil. RESULTS:Application of CEPI gradients with duration of 27 ms covering a 22-cm FOV at a 64 × 64 pixel resolution in SMS and 3D acquisitions resulted in images with comparable quality to those of standard Cartesian EPI. With parallel imaging techniques robust detection of BOLD fMRI activation with temporal sampling down to 275 ms was possible. The high temporal resolution enabled higher activation statistics at a penalty in increased noise and residual aliasing. The un-accelerated 3D acquisition showed large temporal instability compared with a standard 2D acquisition. CONCLUSION:Nonuniform sampling and generalized image reconstructions can be applied to EPI acquisitions including those with blipped-CAIPI z gradients. The same gradients can be used for either SMS or 3D acquisitions providing identical coverage.

SUBMITTER: Rettenmeier C

PROVIDER: S-EPMC6347523 | biostudies-literature | 2019 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

A circular echo planar sequence for fast volumetric fMRI.

Rettenmeier Christoph C Maziero Danilo D Qian Yongxian Y Stenger V Andrew VA

Magnetic resonance in medicine 20181001 3

<h4>Purpose</h4>To demonstrate a circular EPI (CEPI) sequence as well as a generalized EPI reconstruction for fast fMRI with parallel imaging acceleration.<h4>Methods</h4>The CEPI acquisition was constructed using variable readout lengths and maximum ramp sampling as well as blipped-CAIPI z-gradient encoding for simultaneous multislice (SMS) and 3D volumetric imaging. A signal equation model with constant and linear phase terms was used to iteratively reconstruct images with low ghosting. Simula ...[more]

PMID: 30273963

Similar Datasets

Project description:BackgroundMagnetic resonance elastography (MRE) is an imaging technique that can noninvasively assess the shear properties of the intervertebral disc (IVD). Unlike the standard gradient recalled echo (GRE) MRE technique, a spin-echo echo-planar imaging (SE-EPI) sequence has the potential to improve imaging efficiency and patient compliance.PurposeTo validate the use of an SE-EPI sequence for MRE of the IVD compared against the standard GRE sequence.Study typeCross-over.SubjectsTwenty-eight healthy volunteers (15 males and 13 females, age range: 19-55).Field strength/sequence3 T; GRE, SE-EPI with breath holds (SE-EPI-BH) and SE-EPI with free breathing (SE-EPI-FB) MRE sequences.AssessmentMRE-derived shear stiffnesses were calculated via principal frequency analysis. SE-EPI derived shear stiffness and octahedral shear strain signal-to-noise ratios (OSS-SNR) were compared against those derived using the GRE sequence. The reproducibility and repeatability of SE-EPI stiffness measurements were determined. Shear stiffness was evaluated in the nucleus pulposus (NP) and annulus fibrosus (AF) regions of the disc. Scan times between sequences were compared.Statistical testsLinear mixed models, Bland-Altman plots, and Lin's concordance correlation coefficients (CCCs) were used with P < 0.05 considered statistically significant.ResultsGood correlation was observed between shear stiffnesses derived from the SE-EPI sequences with those derived from the GRE sequence with CCC values greater than 0.73 and 0.78 for the NP and AF regions, respectively. OSS-SNR was not significantly different between GRE and SE-EPI sequences (P > 0.05). SE-EPI sequences generated highly reproducible and repeatable stiffness measurements with CCC values greater than 0.97 in the NP and AF regions and reduced scan time by at least 51% compared to GRE. SE-EPI-BH and SE-EPI-FB stiffness measurements were similar with CCC values greater than 0.98 for both regions.Data conclusionSE-EPI-based MRE-derived stiffnesses were highly reproducible and repeatable and correlated with current standard GRE MRE-derived stiffness estimates while reducing scan times.Level of evidence1 TECHNICAL EFFICACY STAGE: 1.

Dataset Information

A circular echo planar sequence for fast volumetric fMRI.

Publications

A circular echo planar sequence for fast volumetric fMRI.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets