Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A highly active Ni(II)-triadamantylphosphine catalyst for ultrahigh-molecular-weight polyethylene synthesis.

ABSTRACT: Here we report that the tri-1-adamantylphosphine-nickel complex [Ad3PNiBr3]-[Ad3PH]+ upon activation with an alkylaluminoxane catalyzes the polymerization of ethylene to ultrahigh-molecular-weight, nearly linear polyethylene (Mn up to 1.68?×?106?g?mol-1) with initial activities reaching 3.7 million turnovers per h-1 at 10?°C. Copolymerizations of ethylene with ?-olefins such as 1-hexene and 1-octadecene, as well as tert-butyldimethyl(dec-9-en-1-yloxy)silane give the corresponding copolymers with no decrease in activity.

SUBMITTER: Kocen AL

PROVIDER: S-EPMC6347634 | biostudies-literature | 2019 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A highly active Ni(II)-triadamantylphosphine catalyst for ultrahigh-molecular-weight polyethylene synthesis.

Kocen Andrew L AL Brookhart Maurice M Daugulis Olafs O

Nature communications 20190125 1

Here we report that the tri-1-adamantylphosphine-nickel complex [Ad3PNiBr3]-[Ad3PH]+ upon activation with an alkylaluminoxane catalyzes the polymerization of ethylene to ultrahigh-molecular-weight, nearly linear polyethylene (Mn up to 1.68 × 106 g mol-1) with initial activities reaching 3.7 million turnovers per h-1 at 10 °C. Copolymerizations of ethylene with α-olefins such as 1-hexene and 1-octad ...[more]

PMID: 30683873

Similar Datasets

Synthesis of High-Molecular-Weight Branched Polyethylene Using a Hybrid "Sandwich" Pyridine-Imine Ni(II) Catalyst.

Project description:Most pyridine-imine Ni(II) and Pd(II) catalysts tend to yield low-molecular-weight polyethylene and ethylene-based copolymers in olefin insertion polymerization, as the unilateral axial steric structure of such complexes often cannot provide effective shielding of the metal center. In this study, we synthesized a series of hybrid "semi-sandwich" and "sandwich" type pyridine-imine Ni(II) complexes by incorporating diarylmethyl or dibenzosuberyl groups onto 8-aryl-naphthyl motif. The as-prepared Ni(II) complexes afforded highly branched polyethylene with high molecular weights (level of 105 g/mol), and moderate activities (level of 105 g/(molh)) in ethylene polymerization. Most interestingly, compared to "semi-sandwich" Ni(II) complexes bearing (2-diarylmethyl-8-aryl)naphthyl units, the "full-sandwich" counterpart containing (2-dibenzosuberyl-8-aryl)naphthyl motif was able to produce higher-molecular-weight polyethylene with higher branching density. In addition, the effect of remote non-conjugated electronic substituents in diarylmethyl groups of the Ni(II) system was also observed in ethylene polymerization.

| S-EPMC9114440 | biostudies-literature

Rewritable Optical Patterns in Light-Responsive Ultrahigh Molecular Weight Polyethylene.

Project description:Spiropyran is used as a photochromic dye to create colored patterns in highly drawn ultrahigh molecular weight polyethylene (UHMW PE) films. The dye is incorporated in highly crystalline, drawn UHMW PE tapes and fibers and isomerizes to its merocyanine state upon UV light irradiation, resulting in a color change from transparent to purple. The isomerization from merocyanine to spiropyran to erase the color can be simply induced by using heat or a green LED light. The combination of the use of a mask and the reversibility of the isomerization results in colored patterns that can be written, erased, and rewritten using UV light and heat or green LED light.

| S-EPMC6433162 | biostudies-literature

Poly(glycidol) Coating on Ultrahigh Molecular Weight Polyethylene for Reduced Biofilm Growth.

Project description:Semibranched poly(glycidol) (PG-OH) and poly(glycidol allylglycidyl ether) (PG-Allyl) coatings were formed on ultrahigh molecular weight polyethylene (UMWPE) in a unique two-step process which included radiation of UHMWPE followed by grafting of PG-OH or PG-Allyl to the surface via free radical cross-linking. Resulting surfaces were extensively characterized by FTIR-ATR, XPS, fluorescent microscopy, and contact goniometry. The performance was evaluated using the most prominent biofilm-forming bacteria Staphylococcus aureus for 24 and 48 h. The PG-Allyl coating demonstrated a 3 log reduction in biofilm growth compared to noncoated control, demonstrating a promising potential to inhibit adherence and colonization of biofilm-forming bacteria that often develop into persistent infections.

| S-EPMC5831121 | biostudies-literature

Less Midterm Damage and Oxidation Are Seen in Retrieved Highly Crosslinked Ultrahigh-Molecular-Weight Polyethylene Tibial Inserts than in Direct Compression Molded Polyethylene Inserts.

Project description:BackgroundHighly crosslinked ultrahigh-molecular-weight polyethylene (XLPE) shows reduced wear in total hip arthroplasty compared to direct compression-molded polyethylene (compPE); however, minimal research evaluating polyethylene damage in XLPE tibial inserts in total knee arthroplasty exists.Questions/purposesWe evaluated damage and material properties in retrieved XLPE components at midterm (≥ 2.5 years) follow-up.MethodsWe identified 19 XLPE tibial inserts with ≥ 30 months in vivo using our institutional review board-approved implant retrieval system; 19 compPE retrieved inserts were matched based on age at index surgery, body mass index, sex, and length of implantation. Articular surface damage was assessed using a subjective grading system. Swell ratio testing and Fourier-transform infrared spectroscopy were used to measure crosslink density (XLPE) and oxidation (XLPE, compPE), respectively, at loaded and unloaded surface and subsurface regions.ResultsCompPE inserts had higher overall damage than XLPE inserts, specifically at the post of posterior-stabilized inserts. The XLPE inserts had lower crosslink density at the loaded surface (0.159 mol/dm3) than either unloaded region (0.183 mol/dm3). CompPE peak oxidation index (OI) was greater than XLPE peak OI in the loaded and unloaded surface regions (1.67 vs. 0.61 and 1.38 vs. 0.46, respectively).ConclusionsSurface damage and oxidation are reduced in XLPE inserts compared to compPE at midterm follow-up. Peak OI greater than 1.0 in the compPE group suggests that mechanical-property degradation had occurred, a likely cause for increased damage. Longer-term retrievals will determine whether these trends continue. Based on midterm results, XLPE shows an advantage over compression molded PE in total knee arthroplasty.

| S-EPMC6031546 | biostudies-literature

Transparent ultrahigh-molecular-weight polyethylene/MXene films with efficient UV-absorption for thermal management.

Project description:The rational use and conversion of energy are the primary means for achieving the goal of carbon neutrality. MXenes can be used for photothermal conversion, but their opaque appearance limits wider applications. Herein, we successfully develop visible-light transparent and UV-absorbing polymer composite film by solution blending the MXene with polyethylene and then vacuum pressing. The resulting film could be quickly heated to 65 °C under 400 mW cm-2 light irradiation and maintained over 85% visible-light transmittance as well as low haze (<12%). The findings of the indoor heat insulation test demonstrate that the temperature of the glass house model covered by this film was 6-7 °C lower than that of the uncovered model, revealing the potential of transparent film in energy-saving applications. In order to mimic the energy-saving condition of the building in various climates, a typical building model with this film as the outer layer of the window was created using the EnergyPlus building energy consumption software. According to predictions, they could reduce yearly refrigeration energy used by 31-61 MJ m-2, and 3%-12% of the total energy used for refrigeration in such structures. This work imply that the film has wide potential for use as transparent devices in energy-related applications.

| S-EPMC11004134 | biostudies-literature

Desferrioxamine reduces ultrahigh-molecular-weight polyethylene-induced osteolysis by restraining inflammatory osteoclastogenesis via heme oxygenase-1.

Project description:As wear particles-induced osteolysis still remains the leading cause of early implant loosening in endoprosthetic surgery, and promotion of osteoclastogenesis by wear particles has been confirmed to be responsible for osteolysis. Therapeutic agents targeting osteoclasts formation are considered for the treatment of wear particles-induced osteolysis. In the present study, we demonstrated for the first time that desferrioxamine (DFO), a powerful iron chelator, could significantly alleviate osteolysis in an ultrahigh-molecular-weight polyethylene (UHMWPE) particles-induced mice calvaria osteolysis model. Furthermore, DFO attenuated calvaria osteolysis by restraining enhanced inflammatory osteoclastogenesis induced by UHMWPE particles. Consistent with the in vivo results, we found DFO was also able to inhibit osteoclastogenesis in a dose-dependent manner in vitro, as evidenced by reduction of osteoclasts formation and suppression of osteoclast specific genes expression. In addition, DFO dampened osteoclasts differentiation and formation at early stage but not at late stage. Mechanistically, the reduction of osteoclastogenesis by DFO was due to increased heme oxygenase-1 (HO-1) expression, as decreased osteoclasts formation induced by DFO was significantly restored after HO-1 was silenced by siRNA, while HO-1 agonist COPP treatment enhanced DFO-induced osteoclastogenesis inhibition. In addition, blocking of p38 mitogen-activated protein kinase (p38MAPK) signaling pathway promoted DFO-induced HO-1 expression, implicating that p38 signaling pathway was involved in DFO-mediated HO-1 expression. Taken together, our results suggested that DFO inhibited UHMWPE particles-induced osteolysis by restraining inflammatory osteoclastogenesis through upregulation of HO-1 via p38MAPK pathway. Thus, DFO might be used as an innovative and safe therapeutic alternative for treating wear particles-induced aseptic loosening.

| S-EPMC5133998 | biostudies-literature

Elongational Flow Field Processed Ultrahigh Molecular Weight Polyethylene/Polypropylene Blends with Distinct Interlayer Phase for Enhanced Tribological Properties.

Project description:Herein, we produced a series of ultrahigh molecular weight polyethylene/polypropylene (UHMWPE/PP) blends by elongational-flow-field dominated eccentric rotor extruder (ERE) and shear-flow-field dominated twin screw extruder (TSE) respectively and presented a detailed comparative study on microstructures and tribological properties of UHMWPE/PP by different processing modes. Compared with the shear flow field in TSE, the elongational flow field in ERE facilitates the dispersion of PP in the UHMWPE matrix and promotes the interdiffusion of UHMWPE and PP molecular chains. For the first time, we discovered the presence of the interlayer phase in blends with different processing modes by using Raman mapping inspection. The elongational flow field introduces strong interaction to enable excellent compatibility of UHMWPE and PP and induces more pronounced interlayer phase with respect to the shear flow field, eventually endowing UHMWPE/PP with improved wear resistance. The optimized UHMWPE/PP (85/15) blend processed by ERE displayed higher tensile strength (25.3 MPa), higher elongation at break (341.77%) and lower wear loss of ERE-85/15 (1.5 mg) compared to the blend created by TSE. By systematically investigating the microstructures and mechanical properties of blends, we found that with increased content of PP, the wear mechanism of blends varies from abrasive wear, fatigue wear, to adhesion wear as the dominant mechanism for two processing modes.

| S-EPMC8230468 | biostudies-literature

Direct Synthesis of Polyethylene Thermoplastic Elastomers Using Hybrid Bulky Acenaphthene-Based α-Diimine Ni(II) Catalysts.

Project description:Recently, polyolefin thermoplastic elastomers can be obtained directly using ethylene as a single feedstock via α-diimine nickel-catalyzed ethylene chain walking polymerization. Here, a new range of bulky acenaphthene-based α-diimine nickel complexes with hybrid o-phenyl and -diarylmethyl anilines were constructed and applied to ethylene polymerization. All the nickel complexes under the activation of excess Et2AlCl exhibited good activity (level of 106 g mol-1 h-1) and produced polyethylene with high molecular weight (75.6-352.4 kg/mol) as well as proper branching densities (55-77/1000C). All the branched polyethylenes obtained exhibited high strain (704-1097%) and moderate to high stress (7-25 MPa) at break values. Most interestingly, the polyethylene produced by the methoxy-substituted nickel complex exhibited significantly lower molecular weights and branching densities, as well as significantly poorer strain recovery values (48% vs. 78-80%) than those by the other two complexes under the same conditions.

| S-EPMC10005668 | biostudies-literature

Synthesis of Ultrahigh Molecular Weight PLAs Using a Phenoxy-Imine Al(III) Complex.

Project description:l- and d-lactide polymerization kinetics using phenoxy-imine ligands of the type Me2Al[O-2-tert-Bu-6-(C6F5N=CH)C6H3] in the presence of n-butanol and benzyl alcohol by ring-opening polymerization into polylactide are investigated. Effects of initiator concentration, catalyst concentration, polymerization temperature, and time on the molecular weight of poly-l-lactide are also investigated. Purification and drying of l-lactide are found to significantly influence the polymerization kinetics and the final molecular weight achieved. Ultrahigh molecular weight poly(l-lactic acid) PLLA (M w = 1.4 × 106 g/mol with Đ = 1.8) and ultrahigh molecular weight poly(d-lactic acid) PDLA (M w = 1.3 × 106 g/mol with Đ = 2.0) are obtained when polymerization is performed with a molar ratio of monomer to catalyst (LA/Al) of 8000 for 72 h at 120 °C in the presence of benzyl alcohol with conversions of 96 and 91%, respectively. We report for the first time the synthesis of ultrahigh molecular weight poly-l- and d-lactide using the Me2Al[O-2-tert-Bu-6-(C6F5N=CH)C6H3] catalyst. The identified catalyst is found to be suitable for the synthesis of a broad range of molecular weights.

| S-EPMC7528193 | biostudies-literature

Highly stretchable and self-healable polymer gels from physical entanglements of ultrahigh-molecular weight polymers.

Project description:Highly stretchable and self-healing polymer gels formed solely by physical entanglements of ultrahigh-molecular weight (UHMW) polymers were fabricated through a facile one-step process. Radical polymerization of vinyl monomers in ionic liquids under very low initiator concentration conditions produced UHMW polymers of more than 106 g/mol with nearly 100% yield, resulting in the formation of physically entangled transparent polymer gels. The UHMW gels showed excellent properties, such as high stretchability, high ionic conductivity, and recyclability. Furthermore, the UHMW gel exhibited room temperature self-healing ability without any external stimuli. The tensile experiments and molecular dynamics simulations indicate that the nonequilibrium state of the fractured surfaces and microscopic interactions between the polymer chains and solvents play a vital role in the self-healing ability. This study provides a physical approach for fabricating stretchable and self-healing polymer gels based on UHMW polymers.

| S-EPMC9581473 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data