Dataset Information

New approaches to identification and characterization of tioconazole in raw material and in pharmaceutical dosage forms.

ABSTRACT: Tioconazole (TCZ), a broad-spectrum antifungal agent, has significant activity against Candida albicans and other Candida species, and therefore, it is indicated for the topical treatment of superficial mycoses. The main goal of this work is to report an exhaustive identification and characterization procedure to improve and facilitate the online quality control and continuous process monitoring of TCZ in bulk material and loaded in two different dosage forms: ovules and nail lacquer. The methodologies were based on thermal (differential scanning calorimetry (DSC), melting point, and thermogravimetry (TG)), spectroscopic (ultraviolet (UV), Raman, near infrared (NIR), infrared spectroscopy coupled to attenuated total reflectance (FTIR-ATR), and nuclear magnetic resonance (NMR)), microscopic and X-ray diffraction (XRD). The TCZ bulk powder showed a high crystallinity, as observed by XRD, with a particles size distribution (3-95?µm) resolved by microscopic measurements. TCZ melting point (82.8?°C) and a degradation peak centered at 297.8?°C were obtained by DSC and DTG, respectively. An unambiguous structure elucidation of TCZ was obtained by mono- and two- dimensional 1H and 13C NMR spectral data analysis. The FTIR-ATR, Raman and NIR spectra of both the raw material and the commercial products were analyzed and their characteristic bands were tabulated. The best methods for TCZ identification in ovules were DSC, TG, XRD, NIR and Raman, while NIR and FTIR-ATR were the most appropriate techniques to analyze it in the nail lacquer. DSC, TG, DRX, Raman, FTIR-ATR and NIR spectroscopy are effective techniques to be used in online process analysis, because they do not require sample preparation, and they are considerably sensitive to analyze complex samples.

SUBMITTER: Calvo NL

PROVIDER: S-EPMC6355464 | biostudies-literature | 2019 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

New approaches to identification and characterization of tioconazole in raw material and in pharmaceutical dosage forms.

Calvo Natalia L NL Alvarez Vera A VA Lamas María C MC Leonardi Darío D

Journal of pharmaceutical analysis 20181123 1

Tioconazole (TCZ), a broad-spectrum antifungal agent, has significant activity against <i>Candida albicans</i> and other <i>Candida</i> species, and therefore, it is indicated for the topical treatment of superficial mycoses. The main goal of this work is to report an exhaustive identification and characterization procedure to improve and facilitate the online quality control and continuous process monitoring of TCZ in bulk material and loaded in two different dosage forms: ovules and nail lacqu ...[more]

PMID: 30740256

Similar Datasets

Project description:Fused deposition modeling (FDM) three-dimensional (3D) printing is being increasingly explored as a direct manufacturing method to product pharmaceutical solid dosage forms. Despite its many advantages as a pharmaceutical formulation tool, it remains restricted to proof-of-concept formulations. The optimization of the printing process in order to achieve adequate precision and printing quality remains to be investigated. Demonstrating a thorough understanding of the process parameters of FDM and their impact on the quality of printed dosage forms is undoubtedly necessary should FDM advance from a proof-of-concept stage to an adapted pharmaceutical manufacturing tool. This article describes the findings of an investigation into a number of critical process parameters of FDM and their impact on quantifiable, pharmaceutically-relevant measures of quality. Polycaprolactone, one of the few polymers which is both suitable for FDM and is a GRAS (generally regarded as safe) material, was used to print internally-exposed grids, allowing examination of both their macroscopic and microstructural reproducibility of FDM. Of the measured quality parameters, dimensional authenticity of the grids was found to poorly match the target dimensions. Weights of the grids were found to significantly vary upon altering printing speed. Printing temperature showed little effect on weight. Weight uniformity per batch was found to lie within acceptable pharmaceutical quality limits. Furthermore, we report observing a microstructural distortion relating to printing temperature which we dub The First Layer Effect (FLE). Principal Component Analysis (PCA) was used to study factor interactions and revealed, among others, the existence of an interaction between weight/dosing accuracy and dimensional authenticity dictating a compromise between the two quality parameters. The Summed Standard Deviation (SSD) is proposed as a method to extract the optimum printing parameters given all the perceived quality parameters and the necessary compromises among them.

Dataset Information

New approaches to identification and characterization of tioconazole in raw material and in pharmaceutical dosage forms.

Publications

New approaches to identification and characterization of tioconazole in raw material and in pharmaceutical dosage forms.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets