Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ultra-Light Reduced Graphene Oxide Based Aerogel/Foam Absorber of Microwave Radiation.

ABSTRACT: We present the polarization-dependent highly absorptive in Ka-band composition of conventional polyurethane foam filled with in situ synthesized aerogel coated by reduced graphene oxide (rGO). The rGO-based aerogel was in situ prepared into the open-cell polyurethane foam (PUF) skeleton through a bidirectional freeze-drying process. The aerogel is composed of the flat lamellas stacks, possessing the anisotropic structure and unique electromagnetic properties. Further improvement of the electromagnetic shielding ability was possible by the rGO coating introduction as a coupling layer between PUF and rGO-based aerogel. This enhances the overall conductivity of the resulting composites: 1.41 + 3.33i S/m vs. 0.9 + 2.45i S/m for PUF loaded with in situ synthesized aerogel without rGO coating.With this mechanically robust plane easy to process coating one could achieve -20 dB by power with the record light structure (0.0462 g/cm²). That could compete in view of the weight per cm² even with graphene-based absorbers comprising either dielectric matching elements or back metal reflectors, or both.

SUBMITTER: Plyushch A

PROVIDER: S-EPMC6356501 | biostudies-literature | 2019 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Macroscopic Electromagnetic Cooperative Network-Enhanced MXene/Ni Chains Aerogel-Based Microwave Absorber with Ultra-Low Matching Thickness.

Project description:Electromagnetic cooperative strategy has been presented as a mainstream approach that can effectively optimize the matching thickness of dielectric loss dominant system. However, it is still challenging for dielectric-magnetic loss coexisting-type absorber to develop electromagnetic wave (EMW) performance with ultra-low matching thickness (≤ 1 mm). Breaking the limitation of traditional electromagnetic response at microscopic/mesoscopic scale, a ficus microcarpa-like magnetic aerogel with macroscopical electromagnetic cooperative effect was fabricated through highly oriented self-assembly engineering. The highly oriented Ni chains with unique macroscopic morphology (~ 1 cm in length) were achieved via a special magnetic field-induced growth. Strong magnetic coupling was observed in the Ni chains confirmed by the micromagnetic simulation. The deductive calculation validates that maintaining high value of electromagnetic parameters at high frequencies is the prerequisites of ultrathin absorber. The electromagnetic cooperative networks with uninterrupted and dual pathways spread through the entire aerogel skeleton, resulting in the impressive permittivity even at high frequencies. Consequently, the aerogel exhibits a remarkable EMW performance at an ultrathin thickness of 1 mm. Thus, based on the modulation of electromagnetic parameters, this work proposed a macroscopic ordered structure with the electromagnetic cooperative effect useful to develop a suitable strategy for achieving ultrathin EMW absorbers.

| S-EPMC9256896 | biostudies-literature

Highly flexible reduced graphene oxide@polypyrrole-polyethylene glycol foam for supercapacitors.

Project description:A flexible and free-standing 3D reduced graphene oxide@polypyrrole-polyethylene glycol (RGO@PPy-PEG) foam was developed for wearable supercapacitors. The device was fabricated sequentially, beginning with the electrodeposition of PPy in the presence of a PEG-borate on a sacrificial Ni foam template, followed by a subsequent GO wrapping and chemical reduction process. The 3D RGO@PPy-PEG foam electrode showed excellent electrochemical properties with a large specific capacitance of 415 F g-1 and excellent long-term stability (96% capacitance retention after 8000 charge-discharge cycles) in a three electrode configuration. An assembled (two-electrode configuration) symmetric supercapacitor using RGO@PPy-PEG electrodes exhibited a remarkable specific capacitance of 1019 mF cm-2 at 2 mV s-1 and 95% capacitance retention over 4000 cycles. The device exhibits extraordinary mechanical flexibility and showed negligable capacitance loss during or after 1000 bending cycles, highlighting its great potential in wearable energy devices.

| S-EPMC9055932 | biostudies-literature

Toward an Ultra-Wideband Hybrid Metamaterial Based Microwave Absorber.

Project description:In this paper, we propose a novel design of an ultra-wideband hybrid microwave absorber operating in the frequency range between 2 GHz and 18 GHz. This proposed hybrid absorber is composed of two different layers that integrate a multiband metamaterial absorber and a lossy dielectric layer. The metamaterial absorber consists of a periodic pattern that is composed of an arrangement of different scales of coupled resonators and a metallic ground plane, and the dielectric layer is made of epoxy foam composite loaded with low weight percentage (0.075 wt.%) of 12 mm length carbon fibers. The numerical results show a largely expanded absorption bandwidth that ranges from 2.6 GHz to 18 GHz with incident angles between 0° and 45° and for both transverse electric and transverse magnetic waves. The measurements confirm that absorption of this hybrid based metamaterial absorber exceeds 90% within the above-mentioned frequency range and it may reach an absorption rate of 99% for certain frequency ranges. The proposed idea offers a further step in developing new electromagnetic absorbers, which will impact a broad range of applications.

| S-EPMC7601967 | biostudies-literature

Anchoring Fe3O4 nanoparticles in a reduced graphene oxide aerogel matrix via polydopamine coating.

Project description:Reduced graphene oxide-magnetite hybrid aerogels attract great interest thanks to their potential applications, e.g., as magnetic actuators. However, the tendency of magnetite particles to migrate within the matrix and, ultimately, escape from the aerogel structure, remains a technological challenge. In this article we show that coating magnetite particles with polydopamine anchors them on graphene oxide defects, immobilizing the particles in the matrix and, at the same time, improving the aerogel structure. Polydopamine coating does not affect the magnetic properties of magnetite particles, making the fabricated materials promising for industrial applications.

| S-EPMC5827803 | biostudies-literature

Super-compressible and mechanically stable reduced graphene oxide aerogel for wearable functional devices

Project description:ABSTRACT The graphene-based aerogels with good electrical conductivity and compressibility have been reported. However, it is challenging to fabricate the graphene aerogel to have excellent mechanical stability for its application in wearable devices. Thus, inspired by macroscale arch-shaped elastic structures and the importance of crosslinking in microstructural stability, we synthesized the mechanically stable reduced graphene oxide aerogels with small elastic modulus by optimizing the reducing agent to make the aligned wrinkled microstructure in which physical crosslinking is dominant. We used L-ascorbic acid, urea, and hydrazine hydrate as reducing agents to synthesize the graphene aerogels rGO-LAA, rGO-Urea, and rGO-HH, respectively. Hydrazine hydrate was found to be best in enhancing the physical and ionic interaction among graphene nanoflakes to achieve a wavy structure with excellent fatigue resistance. Notably, the optimized rGO-HH aerogel maintained structural stability even after 1000 cycles of compression of 50% strain and decompression, showing 98.7% stress retention and 98.1% height retention. We also studied the piezoresistive properties of the rGO-HH aerogel and showed that the rGO-HH-based pressure sensor exhibited excellent sensitivity (~5.7 kPa−1) with good repeatability. Hence, a super-compressible and mechanically stable piezoresistive material for wearable functional devices was demonstrated by controlling the microstructure and surface chemistry of the reduced graphene oxide aerogel. GRAPHICAL ABSTRACT

| S-EPMC10243390 | biostudies-literature

Construct α-FeOOH-Reduced Graphene Oxide Aerogel as a Carrier for Glucose Oxidase Electrode.

Project description:A promising α-FeOOH-reduced graphene oxide aerogel (FeOOH-GA) has been prepared for the assembly of an enzyme electrode. The α-FeOOH-reduced graphene oxide aerogel was characterized by X-ray powder diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The results reveal that graphene oxide is reduced by Fe2+ ion and α-FeOOH nanorods anchored on the reduced graphene oxide sheet through the Fe-O-C bond. Analyses using scanning electron microscopy and the Brunauer-Emmett-Teller method show that FeOOH-GA displays a various and interconnected pore structure. The FeOOH-GA was used as a support material on the glass carbon electrode (GCE) for glucose oxidase (GOD). Electrochemistry properties and bioelectrocatalytic activities of Nafion/GOD/FeOOH-GA/GCE were achieved from cyclic voltammetry and electrochemical impedance spectroscopy. The results show that Nafion/GOD/FeOOH-GA/GCE maintains outstanding catalytic activity and electrochemical properties. The FeOOH-GA could immobilize GOD through the hydrophobicity of the reduced graphene oxide and hydroxide radical of α-FeOOH. Appropriate α-FeOOH and diversified pore structure are beneficial for electron transfer, enzyme electrode storage, and interfacial electron transfer rate. All results indicated that the α-FeOOH-reduced graphene oxide aerogel as a carrier could effectively immobilize the tested enzyme.

| S-EPMC9146937 | biostudies-literature

Reduced Graphene Oxide/Fe<sub>3</sub>O<sub>4</sub>/Polyaniline Ternary Composites as a Superior Microwave Absorber in the Shielding of Electromagnetic Pollution.

Project description:The present work is focused on fabrication of reduced graphene oxide/iron(II/III) oxide/polyaniline (RGO/Fe3O4/PANI) ternary composite by a hydrothermal method, its characterization, and application in the development of a high microwave absorbing shielding material. The RGO/Fe3O4/PANI composite showed dramatic enhancement of dielectric loss and magnetic loss compared to Fe3O4/PANI and RGO/Fe3O4 binary composites. This is ascribed to the embedment of more heterostructure phases. As a result, RGO/Fe3O4/PANI showed remarkably high SET (∼28 dB) through the absorption dominant mechanism. Our findings also showed maximum R L of Fe3O4/PANI, RGO/Fe3O4, and RGO/Fe3O4/PANI in the range of 2-8 GHz corresponding to -25 to -35, -40 to -46, and approximately -64 dB, respectively. This is in all probability due to the good impedance matching between permittivity/permeability and dielectric/magnetic losses.

| S-EPMC8028133 | biostudies-literature

Reduced Graphene Oxide Aerogel inside Melamine Sponge as an Electrocatalyst for the Oxygen Reduction Reaction.

Project description:A graphene oxide aerogel (GOA) was formed inside a melamine sponge (MS) framework. After reduction with hydrazine at 60 °C, the electrical conductive nitrogen-enriched rGOA-MS composite material with a specific density of 20.1 mg/cm3 was used to fabricate an electrode, which proved to be a promising electrocatalyst for the oxygen reduction reaction. The rGOA-MS composite material was characterized by elemental analysis, scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. It was found that nitrogen in the material is presented by different types with the maximum concentration of pyrrole-like nitrogen. By using Raman scattering it was established that the rGOA component of the material is graphene-like carbon with an average size of the sp2-domains of 5.7 nm. This explains a quite high conductivity of the composite obtained.

| S-EPMC7827904 | biostudies-literature

Charge storage mechanisms of manganese oxide nanosheets and N-doped reduced graphene oxide aerogel for high-performance asymmetric supercapacitors.

Project description:Although manganese oxide- and graphene-based supercapacitors have been widely studied, their charge storage mechanisms are not yet fully investigated. In this work, we have studied the charge storage mechanisms of K-birnassite MnO2 nanosheets and N-doped reduced graphene oxide aerogel (N-rGOae) using an in situ X-ray absorption spectroscopy (XAS) and an electrochemical quart crystal microbalance (EQCM). The oxidation number of Mn at the MnO2 electrode is +3.01 at 0?V vs. SCE for the charging process and gets oxidized to +3.12 at +0.8?V vs. SCE and then reduced back to +3.01 at 0?V vs. SCE for the discharging process. The mass change of solvated ions, inserted to the layers of MnO2 during the charging process is 7.4??g?cm-2. Whilst, the mass change of the solvated ions at the N-rGOae electrode is 8.4??g?cm-2. An asymmetric supercapacitor of MnO2//N-rGOae (CR2016) provides a maximum specific capacitance of ca. 467?F?g-1 at 1?A?g-1, a maximum specific power of 39?kW?kg-1 and a specific energy of 40?Wh?kg-1 with a wide working potential of 1.6?V and 93.2% capacity retention after 7,500 cycles. The MnO2//N-rGOae supercapacitor may be practically used in high power and energy applications.

| S-EPMC5114613 | biostudies-literature

Interfacial Hydrothermal Assembly of Three-Dimensional Lamellar Reduced Graphene Oxide Aerogel Membranes for Water Self-Purification.

Project description:Energy-saving membrane separation for water purification is increasingly desired, which requires appropriate nanofiltration membranes enabling to reject undesired solutes efficiently and allows high permeation of water. Herein, we report the fabrication of three-dimensional lamellar reduced graphene oxide (rGO) hydrogel membranes with a one-step, environment-friendly and water/vapor interfacial hydrothermal assembly process and the corresponding aerogel membranes by the freeze-drying method. The structures of the aerogel membranes can be tuned from lamellar to porously interconnected morphologies by controlling the volume of GO suspensions during the hydrothermal process. The rGO aerogel membrane was extremely flexible, which can be bent in liquid nitrogen and boiling water without any deformation, and highly stable in various solvents for at least 2 months. When used as nanofiltration membranes, the rGO aerogel membranes showed ∼100% rejection of organic dyes and a moderate water flux (up to 53 L m-2 h-1) only under the gravity of organic dye aqueous solutions of a 30 cm height. This water self-purification property of our flexible and stable aerogel membranes without extra energy consumption provides a possibility to make cheap, portable water purification devices for utilization in emergency and home-used water purification systems in the areas with electricity unavailable or inconvenient.

| S-EPMC8600619 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data