Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

TiO2-SiO2 supported MnWO x catalysts by liquid-phase deposition for low-temperature NH3-SCR.

ABSTRACT: NH3-SCR is an environmentally important reaction for the abatement of NO x from different resources. MnO2-based catalyst has attracted significant attention due to the excellent activity. In this paper, a series of MnWO x /TiO2-SiO2 catalysts were prepared by liquid-phase deposition method. The catalysts were characterized by N2 adsorption/desorption, XRD, TEM, XPS, FT-IR, H2-TPR, TG and water adsorption capacity. The existence of SiO2 improved the SO2 and H2O resistance of the MnWO x /TiO2-SiO2 catalyst without decreasing the NH3-SCR activity. Under the reaction conditions of 260°C and 60 000 ml gcata h-1 gas hourly space velocity (GHSV), the NO conversion was kept stable at about 95% for 140 min on stream. The excellent performance of MnWO x /TiO2-SiO2 catalyst is considered to be originated from the texture properties and active species dispersion improvement by SiO2 in the support and low-temperature preparation.

SUBMITTER: Lu W

PROVIDER: S-EPMC6366195 | biostudies-literature | 2019 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

TiO2-SiO2 supported MnWO x catalysts by liquid-phase deposition for low-temperature NH3-SCR.

Lu Weizhe W Lu Hanfeng H Zhang Zekai Z

Royal Society open science 20190130 1

NH3-SCR is an environmentally important reaction for the abatement of NO x from different resources. MnO2-based catalyst has attracted significant attention due to the excellent activity. In this paper, a series of MnWO x /TiO2-SiO2 catalysts were prepared by liquid-phase deposition method. The catalysts were characterized by N2 adsorption/desorption, XRD, TEM, XPS, FT-IR, H2-TPR, TG and water a ...[more]

PMID: 30800339

Similar Datasets

Sulfur resistance of Ce-Mn/TiO2 catalysts for low-temperature NH3-SCR.

Project description:Ce-Mn/TiO2 catalyst prepared using a simple impregnation method demonstrated a better low-temperature selective catalytic reduction of NO with NH3 (NH3-SCR) activity in comparison with the sol-gel method. The Ce-Mn/TiO2 catalyst loading with 20% Ce had the best low-temperature activity and achieved a NO conversion rate higher than 90% at 140-260°C with a 99.7% NO conversion rate at 180°C. The Ce-Mn/TiO2 catalyst only had a 6% NO conversion rate decrease after 100 ppm of SO2 was added to the stream. When SO2 was removed from the stream, the catalyst was able to recover completely. The crystal structure, morphology, textural properties and valence state of the metals involving the novel catalysts were investigated using X-ray diffraction, N2 adsorption and desorption analysis, X-ray photoelectron spectroscopy, scanning electron microscopy and energy dispersive spectroscopy, respectively. The decrease of NH3-SCR performance in the presence of 100 ppm SO2 was due to the decrease of the surface area, change of the pore structure, the decrease of Ce4+ and Mn4+ concentration and the formation of the sulfur phase chemicals which blocked the active sites and changed the valence status of the elements.

| S-EPMC5882715 | biostudies-literature

Enhanced low-temperature NH3-SCR performance of Ce/TiO2 modified by Ho catalyst.

Project description:Holmium was used as a dopant to boost the low-temperature NH3-selective catalytic reduction (SCR) performance of Ce/TiO2 catalyst. It was ascertained that certain amount of Ho-doping species could exceedingly improve the low-temperature SCR activity under 60 000 h-1 of Ce/TiO2, accompanied with the improvement of tolerance to H2O and SO2 at 200°C. Characterization results manifested that Ho modification could not only result in inhibiting the growth of TiO2 crystals and the enlargement of specific surface area but also lead to the enhanced redox ability and the increased amount of surface-adsorbed substances, all of which could promote the low-temperature NH3-SCR performance of Ce/TiO2.

| S-EPMC6458355 | biostudies-literature

Polymeric vanadyl species determine the low-temperature activity of V-based catalysts for the SCR of NO x with NH3.

Project description:The structure of dispersed vanadyl species plays a crucial role in the selective catalytic reduction (SCR) of NO with NH3 over vanadia-based catalysts. Here, we demonstrate that the polymeric vanadyl species have a markedly higher NH3-SCR activity than the monomeric vanadyl species. The coupling effect of the polymeric structure not only shortens the reaction pathway for the regeneration of redox sites but also substantially reduces the overall reaction barrier of the catalytic cycle. Therefore, it is the polymeric vanadyl species, rather than the monomeric vanadyl species, that determine the NH3-SCR activity of vanadia-based catalysts, especially under low-temperature conditions. The polymeric vanadia-based SCR mechanism reported here advances the understanding of the working principle of vanadia-based catalysts and paves the way toward the development of low vanadium-loading SCR catalysts with excellent low-temperature activity.

| S-EPMC6269159 | biostudies-literature

Comparative Studies of Effects of Vapor- and Liquid-Phase As2O3 on Catalytic Behaviors of V2O5-WO3/TiO2 Catalysts for NH3-SCR.

Project description:The role of vapor- and liquid-phase As2O3 in deactivating commercial V2O5-WO3/TiO2 catalyst during the NH3-selective catalytic reduction (SCR) process was explored and compared. As2O3 was loaded via vapor deposition (As(vap)) and the wet impregnation (As(imp)) method, respectively. Results demonstrated that the poisoning extent of vapor arsenic was much stronger than in the liquid state. Differences in As distribution on the catalyst surface was one of the main causes. Most vapor As2O3 could be oxidized to As2O5, which underwent stacking and formed a dense covering layer on the catalyst surface. In comparison, liquid As2O3 could also be oxidized but distributed uniformly and did not change the catalyst pore structure. Loading arsenic would destroy the V-OH and V=O active sites of the catalyst, and less reactive As5+-OH was generated. Catalyst oxidizability was also enhanced, resulting in NH3 oxidation enhancement, decreased N2 selectivity, and a decline in SCR activity. Importantly, the intermediate of NH3 oxidation, NH2-amide, also could react with NO + O2, and more N2O was generated on the poisoned catalyst during the SCR process, especially on As(imp). Finally, two mechanisms of arsenic poisoning were proposed, in which the role of vapor and liquid As2O3 over the V2O5-WO3/TiO2 catalyst was compared.

| S-EPMC7528200 | biostudies-literature

Synthesis of CrO x /C catalysts for low temperature NH3-SCR with enhanced regeneration ability in the presence of SO2.

Project description:Chromium oxide nano-particles with an average diameter of 3 nm covered by amorphous carbon (CrO x /C) were successfully synthesized. The synthesized CrO x /C materials were used for the selective catalytic reduction of NO x by NH3 (NH3-SCR), which shows superb NH3-SCR activity and in particular, satisfactory regeneration ability in the presence of SO2 compared with Mn-based catalysts. The as-prepared catalysts were characterized by XRD, HRTEM, Raman, FTIR, BET, TPD, TPR, XPS and in situ FTIR techniques. The results indicated presence of certain amounts of unstable lattice oxygen exposed on the surface of CrO x nano-particles with an average size of 3 nm in the CrO x /C samples, which led to NO being conveniently oxidized to NO2. The formed NO2 participated in NH3-SCR activity, reacting with catalysts via a "fast NH3-SCR" pathway, which enhanced th NH3-SCR performance of the CrO x /C catalysts. Furthermore, the stable lattice of the CrO x species made the catalyst immune to the sulfation process, which was inferred to be the cause of its superior regeneration ability in the presence of SO2. This study provides a simple way to synthesize stable CrO x nano-particles with active oxygen, and sheds light on designing NH3-SCR catalysts with highly efficient low temperature activity, SO2 tolerance, and regeneration ability.

| S-EPMC9077754 | biostudies-literature

Aluminium-induced component engineering of mesoporous composite materials for low-temperature NH3-SCR.

Project description:Supported Mn2O3 is useful in achieving high dinitrogen selectivity at low temperature during ammonia-selective catalytic reduction (SCR). However, its controlled synthesis is challenging when the supporting material is the conventional pure silicon SBA-15 mesoporous molecular sieve. Here we show that silicon and aluminium in fly ash, the solid waste produced by coal-fired power plants, can be used to synthesize an Al-SBA-15 mesoporous molecular sieve support, which can guide the growth of Mn2O3 in the as-synthesized Fe-Mn/Al-SBA-15 NH3-SCR catalyst. Its superior catalytic performance is demonstrated by the high NOx conversion (≥90%) and selectivity (≥86%) at low temperatures (150-300 °C). The combined theoretical and experimental results reveal that the introduction of Al induces the growth of Mn2O3 catalysts. Our findings, therefore, provide a strategy for the rational design of low-temperature NH3-SCR catalysts through dopant-induced component engineering of composite materials.

| S-EPMC9814655 | biostudies-literature

Photonic response and temperature evolution of SiO2/TiO2 multilayers.

Project description:The microstructural and optical reflectivity response of photonic SiO2/TiO2 nanomultilayers have been investigated as a function of temperature and up to the material system's melting point. The nanomultilayers exhibit high, broadband reflectivities up to 1350 °C with values that exceed 75% for a 1 μm broad wavelength range (600-1600 nm). The optimized nanometer sized, dielectric multilayers undergo phase transformations from anatase TiO2 and amorphous SiO2 to the thermodynamically stable phases, rutile and cristobalite, respectively, that alter their structural morphology from the initial multilayers to that of a scatterer. Nonetheless, they retain their photonic characteristics, when characterized on top of selected substrate foils. The thermal behavior of the nanometer sized multilayers has been investigated by differential thermal analysis (DTA) and compared to that of commercially available, mm-sized, annealed powders. The same melting reactions were observed, but the temperatures were lower for the nm-sized samples. The samples were characterized using X-ray powder diffraction before DTA and after annealing at temperatures of 1350 and 1700 °C. The microstructural evolution and phase compositions were investigated by scanning electron microscopy and energy-dispersive X-ray spectroscopy measurements. The limited mutual solubility of one material to another, in combination with the preservation of their optical reflectivity response even after annealing, makes them an interesting material system for high-temperature, photonic coatings, such as photovoltaics, aerospace re-entry and gas turbines, where ultra-high temperatures and intense thermal radiation are present.Supplementary informationThe online version contains supplementary material available at 10.1007/s10853-021-06557-y.

| S-EPMC8550000 | biostudies-literature

Ce regulated surface properties of Mn/SAPO-34 for improved NH3-SCR at low temperature.

Project description:Ce modified MnO x /SAPO-34 was prepared and investigated for low-temperature selective catalytic reduction of NO x with ammonia (NH3-SCR). The 0.3Ce-Mn/SAPO-34 catalyst had nearly 95% NO conversion at 200-350 °C at a space velocity of 10 000 h-1. Microporous SAPO-34 as the support provided the catalyst with increased hydrothermal stability. XPS and H2-TPR results proved that the Mn4+ and Oα content increased after incorporation of Ce, this promoted the conversion of NO at low temperature via a 'fast SCR' route. NH3-TPD measurements combined oxidation experiments of NO, NH3 indicated the reduction of both the surface acidity and the amount of acid sites, which effectively decreased the NH3 oxditaion to NO or N2O at elevated temperature and promoted the catalytic selectivity for nitrogen. A redox cycle between manganese oxide and Ce was assumed for the active oxygen transfer and facilitated the catalyst durability.

| S-EPMC9057469 | biostudies-literature

Stable Cu Catalysts Supported by Two-dimensional SiO2 with Strong Metal-Support Interaction.

Project description:Cu-based catalysts exhibit excellent performance in hydrogenation reactions. However, the poor stability of Cu catalysts under high temperatures has restricted their practical applications. The preparation of stable Cu catalysts supported by SiO2 with strong metal-support interaction (SMSI) has thus aroused great interest due to the high abundance, low toxicity, feasible processability, and low cost of SiO2 . The challenge in the construction of such SMSI remains to be the inertness of SiO2 . Herein, a simple and scalable method is developed to prepare 2D silica (2DSiO2 ) supported Cu catalysts with SMSI by carefully manipulating the topological exfoliation of CaSi2 with CuCl2 and thereafter calcination. The prepared Cu-2DSiO2 catalysts with the unique encapsulated Cu nanoparticles exhibit excellent activity and long-term stability in high-temperature CO2 hydrogenation reactions. This feasible and low-cost solution for stabilizing Cu catalysts might shed light on their realistic applications.

| S-EPMC8948561 | biostudies-literature

Prediction of Cu Zeolite NH3-SCR Activity from Variable Temperature 1H NMR Spectroscopy.

Project description:Selective catalytic reduction (SCR) of NOx by ammonia is one of the dominant pollution abatement technologies for near-zero NOx emission diesel engines. A crucial step in the reduction of NOx to N2 with Cu zeolite NH3-SCR catalysts is the generation of a multi-electron donating active site, implying the permanent or transient dimerization of Cu ions. Cu atom mobility has been implicated by computational chemistry as a key factor in this process. This report demonstrates how variable temperature 1H NMR reveals the Cu induced generation of sharp 1H resonances associated with a low concentration of sites on the zeolite. The onset temperature of the appearance of these signals was found to strongly correlate with the NH3-SCR activity and was observed for a range of catalysts covering multiple frameworks (CHA, AEI, AFX, ERI, ERI-CHA, ERI-OFF, *BEA), with different Si/Al ratios and different Cu contents. The results point towards universal applicability of variable temperature NMR to predict the activity of a Cu-zeolite SCR catalyst. The unique relationship of a spectroscopic feature with catalytic behavior for zeolites with different structures and chemical compositions is exceptional in heterogeneous catalysis.

| S-EPMC10537069 | biostudies-literature