Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Vibration frequency analysis of three-layered cylinder shaped shell with effect of FGM central layer thickness.

ABSTRACT: In this research, vibration frequency analysis of three layered functionally graded material (FGM) cylinder-shaped shell is studied with FGM central layer and the internal and external layers are of homogenous material. Strain and curvature-displacement relations are taken from Sander's shell theory. The shell frequency equation is obtained by employing the Rayleigh Ritz method. Influence on natural frequencies (NFs) is observed for various thickness of the middle layer. The characteristics beam functions are used to estimate the dependence of axial modal. Results are obtained for thickness to radius ratios and length to radius ratios for different edge conditions. The validity of this method is checked for numerous results in the open literature.

SUBMITTER: Ghamkhar M

PROVIDER: S-EPMC6367515 | biostudies-literature | 2019 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Vibration frequency analysis of three-layered cylinder shaped shell with effect of FGM central layer thickness.

Ghamkhar Madiha M Naeem Muhammad Nawaz MN Imran Muhammad M Kamran Muhammad M Soutis Constantinos C

Scientific reports 20190207 1

In this research, vibration frequency analysis of three layered functionally graded material (FGM) cylinder-shaped shell is studied with FGM central layer and the internal and external layers are of homogenous material. Strain and curvature-displacement relations are taken from Sander's shell theory. The shell frequency equation is obtained by employing the Rayleigh Ritz method. Influence on natural frequencies (NFs) is observed for various thickness of the middle layer. The characteristics beam ...[more]

PMID: 30733533

Similar Datasets

Effect of Layer Thickness in Layered Aluminum Matrix Syntactic Foam.

Project description:This work experimentally investigates the effect of layered structure on the static and impact response of a new layered syntactic foam developed for impact energy absorption. The layered syntactic foam had the same density of 1.6 g/cm3 and the same components of 50% large spheres (L) and 50% small spheres (S) with different structures from two layers to five layers. The impact response and energy absorption were investigated by drop-weight impact tests. Under static loading, more layers led to higher yield stress and lower energy absorption. There were three types of progressive failures of layered syntactic form under impact loading. The failure propagation was examined and found to be dependent on the layer number and impact energy. Interestingly, layered syntactic foam absorbed more energy than both of its components in terms of ductility. The ductility of layered syntactic foam decreased with the increase in layer number. The peak stress of layered syntactic foam increased with the increase in layer number. Two-layered syntactic foam LS had the highest ductility under 60 J/g impact, as well as an energy absorption of 35 J/g, compared to other layered syntactic foams. Specifically, its component L had a ductility under 70 J/g and an energy absorption of 25 J/g, while component S had a ductility under 10 J/g and an energy absorption of 10 J/g.

| S-EPMC6947444 | biostudies-literature

Electron cryotomography of SARS-CoV-2 virions reveals cylinder-shaped particles with a double layer RNP assembly.

Project description:SARS-CoV-2 is a lipid-enveloped Betacoronavirus and cause of the Covid-19 pandemic. To study the three-dimensional architecture of the virus, we perform electron cryotomography (cryo-ET) on SARS-Cov-2 virions and three variants revealing particles of regular cylindrical morphology. The ribonucleoprotein particles packaging the genome in the virion interior form a dense, double layer assembly with a cylindrical shape related to the overall particle morphology. This organisation suggests structural interactions important to virus assembly.

| S-EPMC9648435 | biostudies-literature

Control of Uniaxial Negative Thermal Expansion in Layered Perovskites by Tuning Layer Thickness.

Project description:Uniaxial negative thermal expansion (NTE) is known to occur in low n members of the A n+1B n O3n+1 Ruddlesden-Popper (RP) layered perovskite series with a frozen rotation of BO6 octahedra about the layering axis. Previous work has shown that this NTE arises due to the combined effects of a close proximity to a transition to a competing phase, so called "symmetry trapping", and highly anisotropic elastic compliance specific to the symmetry of the NTE phase. We extend this analysis to the broader RP family (n = 1, 2, 3, 4, …, ∞), demonstrating that by changing the fraction of layer interface in the structure (i.e., the value of 1/n) one may control the anisotropic compliance that is necessary for the pronounced uniaxial NTE observed in these systems. More detailed analysis of how the components of the compliance matrix develop with 1/n allows us to identify different regimes, linking enhancements in compliance between these regimes to the crystallographic degrees of freedom in the structure. We further discuss how the perovskite layer thickness affects the frequencies of soft zone boundary modes with large negative Grüneisen parameters, associated with the aforementioned phase transition, that constitute the thermodynamic driving force for NTE. This new insight complements our previous work-showing that chemical control may be used to switch from positive to negative thermal expansion in these systems-since it makes the layer thickness, n, an additional design parameter that may be used to engineer layered perovskites with tuneable thermal expansion. In these respects, we predict that, with appropriate chemical substitution, the n = 1 phase will be the system in which the most pronounced NTE could be achieved.

| S-EPMC6201142 | biostudies-literature

Active Mechanisms of Vibration Encoding and Frequency Filtering in Central Mechanosensory Neurons.

Project description:To better understand biophysical mechanisms of mechanosensory processing, we investigated two cell types in the Drosophila brain (A2 and B1 cells) that are postsynaptic to antennal vibration receptors. A2 cells receive excitatory synaptic currents in response to both directions of movement: thus, twice per vibration cycle. The membrane acts as a low-pass filter, so that voltage and spiking mainly track the vibration envelope rather than individual cycles. By contrast, B1 cells are excited by only forward or backward movement, meaning they are sensitive to vibration phase. They receive oscillatory synaptic currents at the stimulus frequency, and they bandpass filter these inputs to favor specific frequencies. Different cells prefer different frequencies, due to differences in their voltage-gated conductances. Both Na+ and K+ conductances suppress low-frequency synaptic inputs, so cells with larger voltage-gated conductances prefer higher frequencies. These results illustrate how membrane properties and voltage-gated conductances can extract distinct stimulus features into parallel channels.

| S-EPMC5771506 | biostudies-literature

Branch/mode competition in the flow-induced vibration of a square cylinder.

Project description:The flow-induced vibration response of a square cross-sectional cylinder with low mass and damping ratio is analysed using continuous wavelet transforms (CWT) for three representative angles of attack of the cylinder to the incoming flow. The amplitude and frequency responses over a range of flow velocities map out multiple regimes (branches) of oscillation. Analysis of the time-frequency domain for boundary regions between branches using CWT reveals intermittency at the synchronization region boundaries as well as mode competition at branch boundaries. Complementary recurrence analysis shows that periodic dynamical states are interrupted by chaotic bursts in the transition regions around the higher branch at an angle of attack of α = 20° (a new branch first observed by Nemes et al. (2012 J. Fluid Mech.710, 102-130 (doi:10.1017/jfm.2012.353))), supporting the CWT-based frequency-time analysis.This article is part of the theme issue 'Redundancy rules: the continuous wavelet transform comes of age'.

| S-EPMC6048583 | biostudies-literature

NIR light-propelled bullet-shaped carbon hollow nanomotors with controllable shell thickness for the enhanced dye removal.

Project description:Materials with asymmetric nanostructures have attracted tremendous research attention due to their unique structural characteristics, excellent physicochemical properties, and promising prospects. However, it is still difficult to design and fabricate bullet-shaped nanostructure due to its structural complexity. Herein, for the first time, we successfully constructed NIR light-propelled bullet-shaped hollow carbon nanomotors (BHCNs) with an open mouth on the bottom of nano-bullet for the enhanced dye removal, by employing bullet-shaped silica nanoparticles (B-SiO2 NPs) as a hard template. BHCNs were formed by the growth of polydopamine (PDA) layer on the heterogeneous surface of B-SiO2 NPs, followed by the carbonization of PDA and subsequent selective etching of SiO2. The shell thickness of BHCNs was able to be facilely controlled from ≈ 14 to 30 nm by tuning the added amount of dopamine. The combination of streamlined bullet-shaped nanostructure with good photothermal conversion efficiency of carbon materials facilitated the generation of asymmetric thermal gradient field around itself, thus driving the motion of BHCNs by self-thermophoresis. Noteworthily, the diffusion coefficient (De) and velocity of BCHNs with shell thickness of 15 nm (BHCNs-15) reached to 43.8 μm⋅cm-2 and 11.4 μm⋅s-1, respectively, under the illumination of 808 nm NIR laser with the power density of 1.5 W⋅cm-2. The NIR laser propulsion caused BCHNs-15 to enhance the removal efficiency (53.4% vs. 25.4%) of methylene blue (MB) as a typical dye because the faster velocity could produce the higher micromixing role between carbon adsorbent and MB. Such a smart design of the streamlined nanomotors may provide a promising potential in environmental treatment, biomedical and biosensing applications.

| S-EPMC10191002 | biostudies-literature

Giant cylinder‐shaped venous thrombus caused by extracorporeal membrane oxygenation cannula

Project description: Not available

| S-EPMC9526802 | biostudies-literature

Self-Assembled Thin-Layer Glycomaterials With a Proper Shell Thickness for Targeted and Activatable Cell Imaging.

Project description:The construction of targeted and activatable materials can largely improve the precision of disease diagnosis and therapy. However, the currently developed systems either target a transmembrane antigen or are activatable to release imaging and/or therapeutic reagents intracellularly. Here, we develop a simple thin-layer glycomaterial through the self-assembly between fluorescent glycoprobes, in which the carbohydrate-targeting reagent and the fluorophore are linked to each other by polyethylene glycol with a suitable chain length, and thin-layer manganese dioxide. The fluorogenic material developed is both capable of targeting a transmembrane glycoprotein receptor and fluorescently activatable by intracellular biothiols. The shell thickness of the material was determined to be important for achieving the biothiol-induced activation of fluorescence. This research might provide insight into the development of precision-enhanced self-assembled materials for disease theranostics.

| S-EPMC6517789 | biostudies-literature

High-frequency whole-body vibration activates tonic vibration reflex.

Project description:ObjectivesThe aim of this research was to examine whether high-frequency whole-body vibration activates the tonic vibration reflex (TVR).Patients and methodsThe experimental study was conducted with seven volunteers (mean age: 30.8±3.3 years; range, 26 to 35 years) between December 2021 and January 2022. To elicit soleus TVR, high-frequency (100-150 Hz) vibration was applied to the Achilles tendon. High-frequency (100-150 Hz) whole-body vibration and low-frequency (30-40 Hz) whole-body vibration were applied in quiet standing. Whole-body vibration-induced reflexes were recorded from the soleus muscle using surface electromyography. The cumulative average method was used to determine the reflex latencies.ResultsSoleus TVR latency was 35.6±5.9 msec, the latency of the reflex activated by high-frequency whole-body vibration was 34.8±6.2 msec, and the latency of the reflex activated by low-frequency whole-body vibration was 42.8±3.4 msec (F(2, 12)=40.07, p=0.0001, ƞ2 =0.87). The low-frequency whole-body vibration-induced reflex latency was significantly longer than high-frequency whole-body vibration-induced reflex latency and TVR latency (p=0.002 and p=0.001, respectively). High-frequency whole-body vibration-induced reflex latency and TVR latency were found to be similar (p=0.526).ConclusionThis study showed that high-frequency whole-body vibration activates TVR.

| S-EPMC10186020 | biostudies-literature

Structure design method of new balanced vibration reduction gear for the three cylinder engine.

Project description:Aiming at the engineering requirements of reducing the volume and improving the vibration characteristics of gears in the three-cylinder engine balanced system, a design and optimization method of gear structure is proposed based on the Design of Experiments (DOE) and proxy models. The paper analyzes the structure improvement process based on the gear design model and technical index requirements. By designing the plane characteristics of the weight-increasing module, the weight-reducing module and the elastic module, the calculation model of balance performance indices such as mass, moment of inertia and unbalance of new balanced vibration reduction gear are constructed. Then, a more efficient design method is proposed based on dynamic simulation and multidisciplinary optimization design platform (Isight). The results show that the new design method of gear structure can effectively reduce the structure improvement cycle. At the same time, the improved structure can reduce the thickness of the weight-increasing module by 6.3 mm and the vibration attenuation by more than 90%.

| S-EPMC9007366 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data