Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Resistive flow sensing of vital mitochondria with nanoelectrodes.

ABSTRACT: We report label-free detection of single mitochondria with high sensitivity using nanoelectrodes. Measurements of the conductance of carbon nanotube transistors show discrete changes of conductance as individual mitochondria flow over the nanoelectrodes in a microfluidic channel. Altering the bioenergetic state of the mitochondria by adding metabolites to the flow buffer induces changes in the mitochondrial membrane potential detected by the nanoelectrodes. During the time when mitochondria are transiently passing over the nanoelectrodes, this (nano) technology is sensitive to fluctuations of the mitochondrial membrane potential with a resolution of 10mV with temporal resolution of order milliseconds. Fluorescence based assays (in ideal, photon shot noise limited setups) are shown to be an order of magnitude less sensitive than this nano-electronic measurement technology. This opens a new window into the dynamics of an organelle critical to cellular function and fate.

SUBMITTER: Zand K

PROVIDER: S-EPMC6377799 | biostudies-literature | 2017 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Resistive flow sensing of vital mitochondria with nanoelectrodes.

Zand Katayoun K Pham Ted D A TDA Li Jinfeng J Zhou Weiwei W Wallace Douglas C DC Burke Peter J PJ

Mitochondrion 20170624

We report label-free detection of single mitochondria with high sensitivity using nanoelectrodes. Measurements of the conductance of carbon nanotube transistors show discrete changes of conductance as individual mitochondria flow over the nanoelectrodes in a microfluidic channel. Altering the bioenergetic state of the mitochondria by adding metabolites to the flow buffer induces changes in the mitochondrial membrane potential detected by the nanoelectrodes. During the time when mitochondria are ...[more]

PMID: 28655663

Similar Datasets

3D-Printed Carbon Nanoelectrodes for In Vivo Neurotransmitter Sensing.

Project description:Direct laser writing, a nano 3D-printing approach, has enabled fabrication of customized carbon microelectrode sensors for neurochemical detection. However, to detect neurotransmitters in tiny biological organisms or synapses, submicrometer nanoelectrodes are required. In this work, we used 3D printing to fabricate carbon nanoelectrode sensors. Customized structures were 3D printed and then pyrolyzed, resulting in free-standing carbon electrodes with nanotips. The nanoelectrodes were insulated with atomic layer deposition of Al2O3 and the nanotips were polished by a focused ion beam to form 600 nm disks. Using fast-scan cyclic voltammetry, the electrodes successfully detected stimulated dopamine in the adult fly brain, demonstrating that they are robust and sensitive enough to use in tiny biological systems. This work is the first demonstration of 3D printing to fabricate free-standing carbon nanoelectrode sensors and will enable batch fabrication of customized nanoelectrode sensors with precise control and excellent reproducibility.

| S-EPMC7484348 | biostudies-literature

Magnetic microbead transport during resistive pulse sensing.

Project description:Tunable resistive pulse sensing (TRPS) experiments have been used to quantitatively study the motion of 1 μm superparamagnetic beads in a variable magnetic field. Closed-form theory has been developed to interpret the experiments, incorporating six particle transport mechanisms which depend on particle position in and near a conical pore. For our experiments, calculations indicate that pressure-driven flow dominates electrophoresis and magnetism by a factor of ∼100 in the narrowest part of the pore, but that magnetic force should dominate further than ∼1 mm from the membrane. As expected, the observed resistive pulse rate falls as the magnet is moved closer to the pore, while the increase in pulse duration suggests that trajectories in the half space adjacent to the pore opening are important. Aggregation was not observed, consistent with the high hydrodynamic shear near the pore constriction and the high magnetization of aggregates. The theoretical approach is also used to calculate the relative importance of transport mechanisms over a range of geometries and experimental conditions extending well beyond our own experiments. TRPS is emerging as a versatile form of resistive pulse sensing, while magnetic beads are widely used in biotechnology and sensing applications.

| S-EPMC3855170 | biostudies-other

Doping of metal-organic frameworks towards resistive sensing.

Project description:Coordination polymerization leads to various metal-organic frameworks (MOFs) with unique physical properties and chemical functionalities. One of the challenges towards their applications as porous materials is to make MOFs optimally conductive to be used as electronic components. Here, it is demonstrated that Co-MOF-74, a honeycomb nano-framework with one-dimensionally arranged cobalt atoms, advances its physical properties by accommodating tetracyanochinodimethan (TCNQ), an acceptor molecule. Strong intermolecular charge transfer reduces the optical band gap down to 1.5?eV of divalent TCNQ and enhances the electrical conduction, which allows the MOF to be utilized for resistive gas- and photo-sensing. The results provide insight into the electronic interactions in doped MOFs and pave the way for their electronic applications.

| S-EPMC5446391 | biostudies-other

Large-Area Resistive Strain Sensing Sheet for Structural Health Monitoring.

Project description:Damage significantly influences response of a strain sensor only if it occurs in the proximity of the sensor. Thus, two-dimensional (2D) sensing sheets covering large areas offer reliable early-stage damage detection for structural health monitoring (SHM) applications. This paper presents a scalable sensing sheet design consisting of a dense array of thin-film resistive strain sensors. The sensing sheet is fabricated using flexible printed circuit board (Flex-PCB) manufacturing process which enables low-cost and high-volume sensors that can cover large areas. The lab tests on an aluminum beam showed the sheet has a gauge factor of 2.1 and has a low drift of 1.5 ? ? / d a y . The field test on a pedestrian bridge showed the sheet is sensitive enough to track strain induced by the bridge's temperature variations. The strain measured by the sheet had a root-mean-square (RMS) error of 7 ? ? r m s compared to a reference strain on the surface, extrapolated from fiber-optic sensors embedded within the bridge structure. The field tests on an existing crack showed that the sensing sheet can track the early-stage damage growth, where it sensed 600 ? ? peak strain, whereas the nearby sensors on a damage-free surface did not observe significant strain change.

| S-EPMC7085675 | biostudies-literature

Characterization of hepatitis B virus capsids by resistive-pulse sensing.

Project description:We report characterization of hepatitis B virus (HBV) capsids by resistive-pulse sensing through single track-etched conical nanopores formed in poly(ethylene terephthalate) membranes. The pores were ?40 nm in diameter at the tip, and the pore surface was covalently modified with triethylene glycol to reduce surface charge density, minimize adsorption of the virus capsids, and suppress electroosmotic flow in the pore. The HBV capsids were assembled in vitro from Cp149, the assembly domain of HBV capsid protein. Assembled T = 3 (90 Cp149 dimer) and T = 4 (120 dimer) capsids are 31 and 36 nm in diameter, respectively, and were easily discriminated by monitoring the change in current as capsids passed through an electrically biased pore. The ratio of the number of T = 3 to T = 4 capsids transiting a pore did not reflect actual concentrations, but favored transport of smaller T = 3 capsids. These results combined with longer transit times for the T = 4 capsids indicated that the capsids must overcome an entropic barrier to enter a pore.

| S-EPMC3096690 | biostudies-literature

DNAzyme Sensor for the Detection of Ca2+ Using Resistive Pulse Sensing.

Project description:DNAzymes are DNA oligonucleotides that can undergo a specific chemical reaction in the presence of a cofactor. Ribonucleases are a specific form of DNAzymes where a tertiary structure undergoes cleavage at a single ribonuclease site. The cleavage is highly specificity to co-factors, which makes them excellent sensor recognition elements. Monitoring the change in structure upon cleavage has given rise to many sensing strategies; here we present a simple and rapid method of following the reaction using resistive pulse sensors, RPS. To demonstrate this methodology, we present a sensor for Ca2+ ions in solution. A nanoparticle was functionalised with a Ca2+ DNAzyme, and it was possible to follow the cleavage and rearrangement of the DNA as the particles translocate the RPS. The binding of Ca2+ caused a conformation change in the DNAzyme, which was monitored as a change in translocation speed. A 30 min assay produced a linear response for Ca2+ between 1-9 ?m, and extending the incubation time to 60 min allowed for a concentration as low as 0.3 ?m. We demonstrate that the signal is specific to Ca2+ in the presence of other metal ions, and we can quantify Ca2+ in tap and pond water samples.

| S-EPMC7589696 | biostudies-literature

Flexible Graphite/PPG Hybrid Composite-Based Resistive Sensor for Sensing Organic Compounds.

Project description:Our objective in this study was to investigate a sensor for volatile organic compounds based on a graphite (G)/polypropylene glycol (PPG) hybrid composite (HC) for sensing hybrid elements. The G/PPG HC sensor films for organic-matter detection were successfully fabricated on polyethylene terephthalate (PET) film with a simple blade-coating method. The sensing paste based on G/PPG (1:2) HC showed good dispersibility and stability. In addition, G/PPG HC sensor films with organic compounds showed different thickness changes as a function of the G/PPG ratio because of the swelling effect of the polymer. The observed differences in resistance of the G/PPG HC films corresponded to those of common organic compounds, suggesting that the disconnection of graphite caused by the swollen PPG matrix caused explosive resistance change. Moreover, we evaluated the sensitivity of typical hydrocarbon materials, such as benzene and toluene, in the sensor film as well as petroleum materials without moisture-induced malfunctions. This study could provoke knowledge about superior sensing with cost-effective and easily scalable materials using polymer/graphite composite-based sensors to improve the sensitivity, selectivity, and stability of chemical sensor applications.

| S-EPMC7249171 | biostudies-literature

A customizable, low-power, wireless, embedded sensing platform for resistive nanoscale sensors.

Project description:Customizable, portable, battery-operated, wireless platforms for interfacing high-sensitivity nanoscale sensors are a means to improve spatiotemporal measurement coverage of physical parameters. Such a platform can enable the expansion of IoT for environmental and lifestyle applications. Here we report a platform capable of acquiring currents ranging from 1.5 nA to 7.2 µA full-scale with 20-bit resolution and variable sampling rates of up to 3.125 kSPS. In addition, it features a bipolar voltage programmable in the range of -10 V to +5 V with a 3.65 mV resolution. A Finite State Machine steers the system by executing a set of embedded functions. The FSM allows for dynamic, customized adjustments of the nanosensor bias, including elevated bias schemes for self-heating, measurement range, bandwidth, sampling rate, and measurement time intervals. Furthermore, it enables data logging on external memory (SD card) and data transmission over a Bluetooth low energy connection. The average power consumption of the platform is 64.5 mW for a measurement protocol of three samples per second, including a BLE advertisement of a 0 dBm transmission power. A state-of-the-art (SoA) application of the platform performance using a CNT nanosensor, exposed to NO2 gas concentrations from 200 ppb down to 1 ppb, has been demonstrated. Although sensor signals are measured for NO2 concentrations of 1 ppb, the 3σ limit of detection (LOD) of 23 ppb is determined (1σ: 7 ppb) in slope detection mode, including the sensor signal variations in repeated measurements. The platform's wide current range and high versatility make it suitable for signal acquisition from resistive nanosensors such as silicon nanowires, carbon nanotubes, graphene, and other 2D materials. Along with its overall low power consumption, the proposed platform is highly suitable for various sensing applications within the context of IoT.

| S-EPMC8760339 | biostudies-literature

Single-particle detection of native SARS-CoV-2 virions by microfluidic resistive pulse sensing

Project description:Microfluidic resistive pulse sensing (MRPS) was used to determine the size distribution of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) based on detecting nearly 30 000 single virions. However, the ultrastructure of SARS-CoV-2 is thoroughly described, but ensemble properties of SARS-CoV-2, e.g., its particle size distribution, are sparsely reported. According to the MRPS results, the size distribution of SARS-CoV-2 follows a log-normal function with a mean value of 85.1 nm, which corresponds to an approximate diameter of the viral envelope. This result also confirms the low number (< 50) of spike proteins on the surface of the virions. Graphical Abstract

| S-EPMC9306222 | biostudies-literature

Metal-Organic Framework Co-MOF-74-Based Host-Guest Composites for Resistive Gas Sensing.

Project description:Increasing demands in the field of sensing, especially for gas detection applications, require new approaches to chemical sensors. Metal-organic frameworks (MOFs) can play a decisive role owing to their outstanding performances regarding gas selectivity and sensitivity. The tetrathiafulvalene (TTF)-infiltrated MOF, Co-MOF-74, has been prepared following the host-guest concept and evaluated in resistive gas sensing. The Co-MOF-74-TTF crystal morphology has been characterized via X-ray diffraction and scanning electron microscopy, while the successful incorporation of TTF into the MOF has been validated via X-ray photoemission spectroscopy, thermogravimetric analysis, UV/vis, infrared (IR), and Raman investigations. We demonstrate a reduced yet ample uptake of CO2 in the pores of the new material by IR imaging and adsorption isotherms. The nanocomposite Co-MOF-74-TTF exhibits an increased electrical conductivity in comparison to Co-MOF-74 which can be influenced by gas adsorption from a surrounding atmosphere. This effect could be used for gas sensing.

| S-EPMC6492948 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data