Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Long-Range Surface Plasmon-Polariton Waveguide Biosensors for Human Cardiac Troponin I Detection.

ABSTRACT: Straight long-range surface plasmon-polariton (LRSPP) waveguides as biosensors for label-free detection are discussed. The sensors consist of 5-μm-wide 35-nm-thick gold stripes embedded in a low-index optical-grade fluoropolymer (CYTOPTM) with fluidic channels etched to the Au surface of the stripes. This work demonstrates the application of the LRSPP biosensors for the detection of human cardiac troponin I (cTnI) protein. cTnI is a biological marker for acute myocardial infarction (AMI), often referred to as a heart attack, which can be diagnosed by elevated levels of cTnI in patient blood. Direct and sandwich assays were developed and demonstrated over the concentration range from 1 to 1000 ng/mL, yielding detection limits of 430 pg/mL for the direct assay and 28 pg/mL for the sandwich assay (1 standard deviation), the latter being physiologically relevant to the early detection or onset of AMI. In addition, a novel approach for data analysis is proposed, where the analyte response is normalized to the response of the antibody layer.

SUBMITTER: Krupin O

PROVIDER: S-EPMC6386922 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Integrated optical gyroscope using active long-range surface plasmon-polariton waveguide resonator.

Project description:Optical gyroscopes with high sensitivity are important rotation sensors for inertial navigation systems. Here, we present the concept of integrated resonant optical gyroscope constructed by active long-range surface plasmon-polariton (LRSPP) waveguide resonator. In this gyroscope, LRSPP waveguide doped gain medium is pumped to compensate the propagation loss, which has lower pump noise than that of conventional optical waveguide. Peculiar properties of single-polarization of LRSPP waveguide have been found to significantly reduce the polarization error. The metal layer of LRSPP waveguide is electro-optical multiplexed for suppression of reciprocal noises. It shows a limited sensitivity of ~10(-4) deg/h, and a maximum zero drift which is 4 orders of magnitude lower than that constructed by conventional single-mode waveguide.

| S-EPMC3900930 | biostudies-literature

Spontaneous emission noise in long-range surface plasmon polariton waveguide based optical gyroscope.

Project description:Spontaneous emission noise is an important limit to the performance of active plasmonic devices. Here, we investigate the spontaneous emission noise in the long-range surface plasmon-polariton waveguide based optical gyroscope. A theoretical model of the sensitivity is established to study the incoherent multi-beam interference of spontaneous emission in the gyroscope. Numerical results show that spontaneous emission produces a drift in the transmittance spectra and lowers the signal-to-noise-ratio of the gyroscope. It also strengthens the shot noise to be the main limit to the sensitivity of the gyroscope for high propagation loss. To reduce the negative effects of the spontaneous emission noise on the gyroscope, an external feedback loop is suggested to estimate the drift in the transmittance spectra and therefor enhance the sensitivity. Our work lays a foundation for the improvement of long-range surface plasmon-polariton gyroscope and paves the way to its practical application.

| S-EPMC4168282 | biostudies-other

Ultrasensitive biosensors based on waveguide-coupled long-range surface plasmon resonance (WC-LRSPR) for enhanced fluorescence spectroscopy.

Project description:We investigated the coupling phenomenon between plasmonic resonance and waveguide modes through theoretical and experimental parametric analyses on the bimetallic waveguide-coupled long-range surface plasmon resonance (Bi-WCLRSPR) structure. The calculation results indicated that the multi-plasmonic coupling gives rise to the enhanced depth-to-width ratio of the reflection dip compared to that of LRSPR excited using a single set of Ag and Teflon. The optimized thickness of Ag(40 nm)/Teflon(700 nm)/Ag(5 nm)/Au(5 nm) was obtained and generated the highest plasmon intensity enhancement, which was 2.38 folds in comparison to the conventional bimetallic surface plasmon resonance (SPR) configuration (Ag/Au). 17β-Estradiol was used in the fluorescence enhancement experiment by the reflection geometry-based system, wherein the excitation light source was on the side of a WC-LRSPR chip opposite to that of the light detection unit. The phenomenon of surface plasmon-couple emission (SPCE) depends on the number of 17β-estradiol molecule promoters from female sex steroid hormones, which demonstrated a limit of detection (LOD) of 2 pg mL-1 and 1.47-fold fluorescence improvement as compared to the non-coated material on the surface of pristine glass. This enhanced WC-LRSPR can readily find application in fluorescence escalation needed in cases where a weak fluorescence signal is predicted, such as the small volume of liquid containing fluorescent dyes in biological diagnosis.

| S-EPMC9034228 | biostudies-literature

Sensitivity Comparison of Surface Plasmon Resonance and Plasmon-Waveguide Resonance Biosensors.

Project description:Plasmon-waveguide resonance (PWR) sensors are particularly useful for investigation of biomolecular interactions with or within lipid bilayer membranes. Many studies demonstrated their ability to provide unique qualitative information, but the evaluation of their sensitivity as compared to other surface plasmon resonance (SPR) sensors has not been broadly investigated. We report here a comprehensive sensitivity comparison of SPR and PWR biosensors for the p-polarized light component. The sensitivity of five different biosensor designs to changes in refractive index, thickness and mass are determined and discussed. Although numerical simulations show an increase of the electric field intensity by 30-35 % and the penetration depth by four times in PWR, the waveguide-based method is 0.5 to 8 fold less sensitive than conventional SPR in all considered analytical parameters. The experimental results also suggest that the increase in the penetration depth in PWR is made at the expense of the surface sensitivity. The physical and structural reasons for PWR sensor limitations are discussed and a general viewpoint for designing more efficient SPR sensors based on dielectric slab waveguides is provided.

| S-EPMC3111218 | biostudies-literature

Synergistic Effects of Localized Surface Plasmon Resonance, Surface Plasmon Polariton, and Waveguide Plasmonic Resonance on the Same Material: A Promising Hypothesis to Enhance Organic Solar Cell Efficiency.

Project description:This work explores the utilization of plasmonic resonance (PR) in silver nanowires to enhance the performance of organic solar cells. We investigate the simultaneous effect of localized surface plasmon resonance (LSPR), surface plasmon polariton (SPP), and waveguide plasmonic mode on silver nanowires, which have not been thoroughly explored before. By employing finite-difference time-domain (FDTD) simulations, we analyze the plasmonic resonance behavior of a ZnO/Silver nanowires/ZnO (ZAZ) electrode structure. Our investigations demonstrate the dominance of LSPR, leading to intense electric fields inside the nanowire and their propagation into the surrounding medium. Additionally, we observe the synergistic effects of SPP and waveguide plasmonic mode, contributing to enhanced light absorption within the active layer of the organic solar cell. This leads to an improvement in photovoltaic performance, as demonstrated by our previous work, showing an approximate 20% increase in photocurrent and overall power conversion efficiency of the organic solar cell. The incorporation of metallic nanostructures exhibiting these multiple plasmonic modes opens up new opportunities for improving light absorption and overall device efficiency. Our study highlights the potential of these combined plasmonic effects for the design and optimization of organic solar cells.

| S-EPMC10421476 | biostudies-literature

Quantum teleportation mediated by surface plasmon polariton.

Project description:Surface plasmon polaritons (SPPs) are collective excitations of free electrons propagating along a metal-dielectric interface. Although some basic quantum properties of SPPs, such as the preservation of entanglement, the wave-particle duality of a single plasmon, the quantum interference of two plasmons, and the verification of entanglement generation, have been shown, more advanced quantum information protocols have yet to be demonstrated with SPPs. Here, we experimentally realize quantum state teleportation between single photons and SPPs. To achieve this, we use polarization-entangled photon pairs, coherent photon-plasmon-photon conversion on a metallic subwavelength hole array, complete Bell-state measurements and an active feed-forward technique. The results of both quantum state and quantum process tomography confirm the quantum nature of the SPP mediated teleportation. An average state fidelity of [Formula: see text] and a process fidelity of [Formula: see text], which are well above the classical limit, are achieved. Our work shows that SPPs may be useful for realizing complex quantum protocols in a photonic-plasmonic hybrid quantum network.

| S-EPMC7359310 | biostudies-literature

Low-dimensional heat conduction in surface phonon polariton waveguide.

Project description:Heat conduction in solids is typically governed by the Fourier's law describing a diffusion process due to the short wavelength and mean free path for phonons and electrons. Surface phonon polaritons couple thermal photons and optical phonons at the surface of polar dielectrics, possessing much longer wavelength and propagation length, representing an excellent candidate to support extraordinary heat transfer. Here, we realize clear observation of thermal conductivity mediated by surface phonon polaritons in SiO2 nanoribbon waveguides of 20-50 nm thick and 1-10 μm wide and also show non-Fourier behavior in over 50-100 μm distance at room and high temperature. This is enabled by rational design of the waveguide to control the mode size of the surface phonon polaritons and its efficient coupling to thermal reservoirs. Our work laid the foundation for manipulating heat conduction beyond the traditional limit via surface phonon polaritons waves in solids.

| S-EPMC10716141 | biostudies-literature

A submicron broadband surface-plasmon-polariton unidirectional coupler.

Project description:The manipulation of light propagation is a basic subject in optics and has many important applications. With the development of nano-optics, this area has been downscaled to wavelength or even subwavelength scales. One of the most efficient ways to control light propagation is to exploit interference effects. Here, by manipulating the interference between two nanogrooves on a metal surface, we realize a submicron broadband surface-plasmon-polariton (SPP) unidirectional coupler. More importantly, we find an anomalous bandwidth shrinking behavior in the proposed SPP unidirectional coupler as the groove separation is down to a subwavelength scale of one-quarter of the SPP wavelength. This abnormal behavior is well explained by considering the contribution of the near-field quasi-cylindrical waves in addition to the interference of propagating SPPs and the dispersion effects of individual grooves. Such near-field effects provide new opportunities for the design of ultracompact optical devices.

| S-EPMC3669946 | biostudies-literature

Novel Dual-band Band-Pass Filters Based on Surface Plasmon Polariton-like Propagation Induced by Structural Dispersion of Substrate Integrated Waveguide.

Project description:In this paper, we present two novel dual-band bandpass filters based on surface plasmon polariton-like (SPP-like) propagation induced by structural dispersion of substrate integrated waveguide (SIW). Both filters are realized as a three-layer SIW where each layer represents a sub-SIW structure with intrinsic effective permittivity that depends on its width and filling dielectric material. The layers are designed to have effective permittivities of opposite signs in certain frequency ranges, which enables SPP-like propagation to occur at their interfaces. Since three layers can provide two distinct SPP-like propagations, the filters exhibit dual-band behaviour. A detailed theoretical and numerical analysis and numerical optimization have been used to design the filters, which were afterwards fabricated using standard printed circuit board technology. The independent choice of geometrical parameters of sub-SIWs and/or the corresponding dielectric materials provide a great freedom to arbitrarily position the passbands in the spectrum, which is a significant advantage of the proposed filters. At the same time, they meet the requirements for low-cost low-profile configuration since they are realized as SIW structures, as well as for excellent in-band characteristics and selectivity which is confirmed by the measurement results.

| S-EPMC5974233 | biostudies-literature

High Sensitive Biosensors Based on the Coupling Between Surface Plasmon Polaritons on Titanium Nitride and a Planar Waveguide Mode.

Project description:High sensitivity biosensors based on the coupling of surface plasmon polaritons on titanium nitride (TiN) and a planar waveguide mode were built; they were proved by sensing three different media: air, water and dried egg white; sensors described here could be useful for sensing materials with a refractive index between 1.0 and 1.6; in particular, materials of biological interest with a refractive index in the range 1.3-1.6, like those containing biotin and/or streptavidin. They were built by depositing Nb2O5/SiO2/TiN multilayer structures on the flat surface of D-shaped sapphire prisms by using the dc magnetron sputtering technique. Attenuated total reflection (ATR) experiments in the Kretschmann configuration were accomplished for the air/TiN/Prism and S/Nb2O5/SiO2/TiN/Prism structures, S being the sample or sensing medium. ATR spectra for plasmons at the TiN/air interface showed a broad absorption band for angles of incidence between 36 and 85°, with full width at half maximum (FWHM) of approximately 40°. For the S/Nb2O5/SiO2/TiN/Prism structures, ATR spectra showed a sharp reflectivity peak, within the broad plasmonic absorption band, which was associated with Fano resonances. The angular position and FWHM of the Fano resonances strongly depend on the refractive index of the sensing medium. ATR spectra were fitted by using the transfer-matrix method. Additionally, we found that angular sensitivity and figure of merit increase with increasing the refractive index of the sensing medium.

| S-EPMC7146431 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data