Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Evaluation of GBLUP, BayesB and elastic net for genomic prediction in Chinese Simmental beef cattle.

ABSTRACT: Chinese Simmental beef cattle are the most economically important cattle breed in China. Estimated breeding values for growth, carcass, and meat quality traits are commonly used as selection criteria in animal breeding. The objective of this study was to evaluate the accuracy of alternative statistical methods for the estimation of genomic breeding values. Analyses of the accuracy of genomic best linear unbiased prediction (GBLUP), BayesB, and elastic net (EN) were performed with an Illumina BovineHD BeadChip on 1,217 animals by applying 5-fold cross-validation. Overall, the accuracies ranged from 0.17 to 0.296 for ten traits, and the heritability estimates ranged from 0.36 to 0.63. The EN (alpha = 0.001) model provided the most accurate prediction, which was also slightly higher (0.2-2%) than that of GBLUP for most traits, such as average daily weight gain (ADG) and carcass weight (CW). BayesB was less accurate for each trait than were EN (alpha = 0.001) and GBLUP. These findings indicate the importance of using an appropriate variable selection method for the genomic selection of traits and suggest the influence of the genetic architecture of the traits we analyzed.

SUBMITTER: Wang X

PROVIDER: S-EPMC6394919 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Accuracies of genomic prediction for twenty economically important traits in Chinese Simmental beef cattle.

Project description:Genomic prediction has been widely utilized to estimate genomic breeding values (GEBVs) in farm animals. In this study, we conducted genomic prediction for 20 economically important traits including growth, carcass and meat quality traits in Chinese Simmental beef cattle. Five approaches (GBLUP, BayesA, BayesB, BayesC? and BayesR) were used to estimate the genomic breeding values. The predictive accuracies ranged from 0.159 (lean meat percentage estimated by BayesC?) to 0.518 (striploin weight estimated by BayesR). Moreover, we found that the average predictive accuracies across 20 traits were 0.361, 0.361, 0.367, 0.367 and 0.378, and the averaged regression coefficients were 0.89, 0.86, 0.89, 0.94 and 0.95 for GBLUP, BayesA, BayesB, BayesC? and BayesR respectively. The genomic prediction accuracies were mostly moderate and high for growth and carcass traits, whereas meat quality traits showed relatively low accuracies. We concluded that Bayesian regression approaches, especially for BayesR and BayesC?, were slightly superior to GBLUP for most traits. Increasing with the sizes of reference population, these two approaches are feasible for future application of genomic selection in Chinese beef cattle.

| S-EPMC6900049 | biostudies-literature

Incorporating Genome Annotation Into Genomic Prediction for Carcass Traits in Chinese Simmental Beef Cattle.

Project description:Various methods have been proposed for genomic prediction (GP) in livestock. These methods have mainly focused on statistical considerations and did not include genome annotation information. In this study, to improve the predictive performance of carcass traits in Chinese Simmental beef cattle, we incorporated the genome annotation information into GP. Single nucleotide polymorphisms (SNPs) were annotated to five genomic classes: intergenic, gene, exon, protein coding sequences, and 3'/5' untranslated region. Haploblocks were constructed for all markers and these five genomic classes by defining a biologically functional unit, and haplotype effects were modeled in both numerical dosage and categorical coding strategies. The first-order epistatic effects among SNPs and haplotypes were modeled using a categorical epistasis model. For all makers, the extension from the SNP-based model to a haplotype-based model improved the accuracy by 5.4-9.8% for carcass weight (CW), live weight (LW), and striploin (SI). For the five genomic classes using the haplotype-based prediction model, the incorporation of gene class information into the model improved the accuracies by an average of 1.4, 2.1, and 1.3% for CW, LW, and SI, respectively, compared with their corresponding results for all markers. Including the first-order epistatic effects into the prediction models improved the accuracies in some traits and genomic classes. Therefore, for traits with moderate-to-high heritability, incorporating genome annotation information of gene class into haplotype-based prediction models could be considered as a promising tool for GP in Chinese Simmental beef cattle, and modeling epistasis in prediction can further increase the accuracy to some degree.

| S-EPMC7243208 | biostudies-literature

Genomic prediction with parallel computing for slaughter traits in Chinese Simmental beef cattle using high-density genotypes.

Project description:Genomic selection has been widely used for complex quantitative trait in farm animals. Estimations of breeding values for slaughter traits are most important to beef cattle industry, and it is worthwhile to investigate prediction accuracies of genomic selection for these traits. In this study, we assessed genomic predictive abilities for average daily gain weight (ADG), live weight (LW), carcass weight (CW), dressing percentage (DP), lean meat percentage (LMP) and retail meat weight (RMW) using Illumina Bovine 770K SNP Beadchip in Chinese Simmental cattle. To evaluate the abilities of prediction, marker effects were estimated using genomic BLUP (GBLUP) and three parallel Bayesian models, including multiple chains parallel BayesA, BayesB and BayesC? (PBayesA, PBayesB and PBayesC?). Training set and validation set were divided by random allocation, and the predictive accuracies were evaluated using 5-fold cross validations. We found the accuracies of genomic predictions ranged from 0.195±0.084 (GBLUP for LMP) to 0.424±0.147 (PBayesB for CW). The average accuracies across traits were 0.327±0.085 (GBLUP), 0.335±0.063 (PBayesA), 0.347±0.093 (PBayesB) and 0.334±0.077 (PBayesC?), respectively. Notably, parallel Bayesian models were more accurate than GBLUP across six traits. Our study suggested that genomic selections with multiple chains parallel Bayesian models are feasible for slaughter traits in Chinese Simmental cattle. The estimations of direct genomic breeding values using parallel Bayesian methods can offer important insights into improving prediction accuracy at young ages and may also help to identify superior candidates in breeding programs.

| S-EPMC5516975 | biostudies-literature

Genomic Prediction and Association Analysis with Models Including Dominance Effects for Important Traits in Chinese Simmental Beef Cattle.

Project description:Non-additive effects play important roles in determining genetic changes with regard to complex traits; however, such effects are usually ignored in genetic evaluation and quantitative trait locus (QTL) mapping analysis. In this study, a two-component genome-based restricted maximum likelihood (GREML) was applied to obtain the additive genetic variance and dominance variance for carcass weight (CW), dressing percentage (DP), meat percentage (MP), average daily gain (ADG), and chuck roll (CR) in 1233 Simmental beef cattle. We estimated predictive abilities using additive models (genomic best linear unbiased prediction (GBLUP) and BayesA) and dominance models (GBLUP-D and BayesAD). Moreover, genome-wide association studies (GWAS) considering both additive and dominance effects were performed using a multi-locus mixed-model (MLMM) approach. We found that the estimated dominance variances accounted for 15.8%, 16.1%, 5.1%, 4.2%, and 9.7% of the total phenotypic variance for CW, DP, MP, ADG, and CR, respectively. Compared with BayesA and GBLUP, we observed 0.5-1.1% increases in predictive abilities of BayesAD and 0.5-0.9% increases in predictive abilities of GBLUP-D, respectively. Notably, we identified a dominance association signal for carcass weight within RIMS2, a candidate gene that has been associated with carcass weight in beef cattle. Our results suggest that dominance effects yield variable degrees of contribution to the total genetic variance of the studied traits in Simmental beef cattle. BayesAD and GBLUP-D are convenient models for the improvement of genomic prediction, and the detection of QTLs using a dominance model shows promise for use in GWAS in cattle.

| S-EPMC6941016 | biostudies-literature

Genome wide association study and genomic prediction for fatty acid composition in Chinese Simmental beef cattle using high density SNP array.

Project description:Fatty acid composition of muscle is an important trait contributing to meat quality. Recently, genome-wide association study (GWAS) has been extensively used to explore the molecular mechanism underlying important traits in cattle. In this study, we performed GWAS using high density SNP array to analyze the association between SNPs and fatty acids and evaluated the accuracy of genomic prediction for fatty acids in Chinese Simmental cattle.Using the BayesB method, we identified 35 and 7 regions in Chinese Simmental cattle that displayed significant associations with individual fatty acids and fatty acid groups, respectively. We further obtained several candidate genes which may be involved in fatty acid biosynthesis including elongation of very long chain fatty acids protein 5 (ELOVL5), fatty acid synthase (FASN), caspase 2 (CASP2) and thyroglobulin (TG). Specifically, we obtained strong evidence of association signals for one SNP located at 51.3 Mb for FASN using Genome-wide Rapid Association Mixed Model and Regression-Genomic Control (GRAMMAR-GC) approaches. Also, region-based association test identified multiple SNPs within FASN and ELOVL5 for C14:0. In addition, our result revealed that the effectiveness of genomic prediction for fatty acid composition using BayesB was slightly superior over GBLUP in Chinese Simmental cattle.We identified several significantly associated regions and loci which can be considered as potential candidate markers for genomics-assisted breeding programs. Using multiple methods, our results revealed that FASN and ELOVL5 are associated with fatty acids with strong evidence. Our finding also suggested that it is feasible to perform genomic selection for fatty acids in Chinese Simmental cattle.

| S-EPMC5471809 | biostudies-other

Genomic Prediction Using LD-Based Haplotypes Inferred From High-Density Chip and Imputed Sequence Variants in Chinese Simmental Beef Cattle.

Project description:A haplotype is defined as a combination of alleles at adjacent loci belonging to the same chromosome that can be transmitted as a unit. In this study, we used both the Illumina BovineHD chip (HD chip) and imputed whole-genome sequence (WGS) data to explore haploblocks and assess haplotype effects, and the haploblocks were defined based on the different LD thresholds. The accuracies of genomic prediction (GP) for dressing percentage (DP), meat percentage (MP), and rib eye roll weight (RERW) based on haplotype were investigated and compared for both data sets in Chinese Simmental beef cattle. The accuracies of GP using the entire imputed WGS data were lower than those using the HD chip data in all cases. For DP and MP, the accuracy of GP using haploblock approaches outperformed the individual single nucleotide polymorphism (SNP) approach (GBLUP_In_Block) at specific LD levels. Hotelling's test confirmed that GP using LD-based haplotypes from WGS data can significantly increase the accuracies of GP for RERW, compared with the individual SNP approach (∼1.4 and 1.9% for GHBLUP and GHBLUP+GBLUP, respectively). We found that the accuracies using haploblock approach varied with different LD thresholds. The LD thresholds (r 2 ≥ 0.5) were optimal for most scenarios. Our results suggested that LD-based haploblock approach can improve accuracy of genomic prediction for carcass traits using both HD chip and imputed WGS data under the optimal LD thresholds in Chinese Simmental beef cattle.

| S-EPMC8358323 | biostudies-literature

Genome-Wide Association Analysis of Growth Curve Parameters in Chinese Simmental Beef Cattle.

Project description:The objective of the present study was to perform a genome-wide association study (GWAS) for growth curve parameters using nonlinear models that fit original weight-age records. In this study, data from 808 Chinese Simmental beef cattle that were weighed at 0, 6, 12, and 18 months of age were used to fit the growth curve. The Gompertz model showed the highest coefficient of determination (R2 = 0.954). The parameters' mature body weight (A), time-scale parameter (b), and maturity rate (K) were treated as phenotypes for single-trait GWAS and multi-trait GWAS. In total, 9, 49, and 7 significant SNPs associated with A, b, and K were identified by single-trait GWAS; 22 significant single nucleotide polymorphisms (SNPs) were identified by multi-trait GWAS. Among them, we observed several candidate genes, including PLIN3, KCNS3, TMCO1, PRKAG3, ANGPTL2, IGF-1, SHISA9, and STK3, which were previously reported to associate with growth and development. Further research for these candidate genes may be useful for exploring the full genetic architecture underlying growth and development traits in livestock.

| S-EPMC7830728 | biostudies-literature

Validation of the Prediction Accuracy for 13 Traits in Chinese Simmental Beef Cattle Using a Preselected Low-Density SNP Panel.

Project description:Chinese Simmental beef cattle play a key role in the Chinese beef industry due to their great adaptability and marketability. To achieve efficient genetic gain at a low breeding cost, it is crucial to develop a customized cost-effective low-density SNP panel for this cattle population. Thirteen growth, carcass, and meat quality traits and a BovineHD Beadchip genotyping of 1346 individuals were used to select trait-associated variants and variants contributing to great genetic variance. In addition, highly informative SNPs with high MAF in each 500 kb sliding window and in each genic region were also included separately. A low-density SNP panel consisting of 30,684 SNPs was developed, with an imputation accuracy of 97.4% when imputed to the 770 K level. Among 13 traits, the average prediction accuracy levels evaluated by genomic best linear unbiased prediction (GBLUP) and BayesA/B/Cπ were 0.22-0.47 and 0.18-0.60 for the ~30 K array and BovineHD Beadchip, respectively. Generally, the predictive performance of the ~30 K array was trait-dependent, with reduced prediction accuracies for seven traits. While differences in terms of prediction accuracy were observed among the 13 traits, the low-density SNP panel achieved moderate to high accuracies for most of the traits and even improved the accuracies for some traits.

| S-EPMC8300368 | biostudies-literature

Weighted Single-Step Genome-Wide Association Study for Growth Traits in Chinese Simmental Beef Cattle.

Project description:Improving the genetic process of growth traits is one of the major goals in the beef cattle industry, as it can increase meat production and reduce the cost of raising animals. Although several quantitative trait loci affecting growth traits in beef cattle have been identified, the genetic architecture of these economically important traits remains elusive. This study aims to map single nucleotide polymorphisms (SNPs) and genes associated with birth weight (BW), yearling weight (YW), average daily gain from birth to yearling (BYADG), and body weight at the age of 18 months (18MW) in a Chinese Simmental beef cattle population using a weighted, single-step, genome-wide association study (wssGWAS). Phenotypic and pedigree data from 6022 animals and genotypes from 744 animals (596,297 SNPs) were used for an association analysis. The results showed that 66 genomic windows explained 1.01-20.15% of the genetic variance for the four examined traits, together with the genes near the top SNP within each window. Furthermore, the identified genomic windows (>1%) explained 50.56%, 57.71%, 61.78%, and 37.82% of the genetic variances for BW, YW, BYADG, and 18MW, respectively. Genes with potential functions in muscle development and regulation of cell growth were highlighted as candidates for growth traits in Simmental cattle (SQOR and TBCB for BW, MYH10 for YW, RLF for BYADG, and ARHGAP31 for 18MW). Moreover, we found 40 SNPs that had not previously been identified as being associated with growth traits in cattle. These findings will further advance our understanding of the genetic basis for growth traits and will be useful for the molecular breeding of BW, YW, BYADG, and 18MW in the context of genomic selection in beef cattle.

| S-EPMC7074168 | biostudies-literature

Runs of homozygosity analysis reveals consensus homozygous regions affecting production traits in Chinese Simmental beef cattle.

Project description:BackgroundGenomic regions with a high frequency of runs of homozygosity (ROH) are related to important traits in farm animals. We carried out a comprehensive analysis of ROH and evaluated their association with production traits using the BovineHD (770 K) SNP array in Chinese Simmental beef cattle.ResultsWe detected a total of 116,953 homozygous segments with 2.47Gb across the genome in the studied population. The average number of ROH per individual was 99.03 and the average length was 117.29 Mb. Notably, we detected 42 regions with a frequency of more than 0.2. We obtained 17 candidate genes related to body size, meat quality, and reproductive traits. Furthermore, using Fisher's exact test, we found 101 regions were associated with production traits by comparing high groups with low groups in terms of production traits. Of those, we identified several significant regions for production traits (P < 0.05) by association analysis, within which candidate genes including ECT2, GABRA4, and GABRB1 have been previously reported for those traits in beef cattle.ConclusionsOur study explored ROH patterns and their potential associations with production traits in beef cattle. These results may help to better understand the association between production traits and genome homozygosity and offer valuable insights into managing inbreeding by designing reasonable breeding programs in farm animals.

| S-EPMC8454143 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data