Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Chemical and Electrochemical Synthesis of Polypyrrole Using Carrageenan as a Dopant: Polypyrrole/Multi-Walled Carbon Nanotube Nanocomposites.

ABSTRACT: In this article, iota-carrageenan (IC) and kappa-carrageenan (KC) are used as dopants for the chemical and electrochemical synthesis of polypyrrole (PPy). The composites of chemically synthesized PPy with multi-walled carbon nanotubes (MWNTs) were prepared using an in situ technique. Both the dialyzed and non-dialyzed IC and KC were used as dopants for electrochemical polymerization of pyrrole. Chemically synthesized PPy and PPy/MWNTs composites were studied by ultraviolet visible (UV-vis) absorption spectra to investigate the effect of the concentration and the incorporation of MWNTs. In addition, the electrical, thermal, mechanical, and microscopic characterizations of these films were performed to examine the effect of the dopants and MWNTs on these properties, along with their surface morphology. The films of electrochemically polymerized PPy were characterized using UV-vis absorption spectra, scanning electron microscopy, and cyclic voltammetry (CV). The results were then compared with the chemical polymerized PPy.

SUBMITTER: Rahaman M

PROVIDER: S-EPMC6403922 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Thermal, Rheological, Mechanical, and Electrical Properties of Polypropylene/Multi-Walled Carbon Nanotube Nanocomposites.

Project description:In this paper, nanocomposites based on polypropylene (PP) filled with up to 5 wt.% of multi-walled carbon nanotubes (MWCNTs) were investigated for determining the material property data used in numerical simulation of manufacturing processes such as the injection molding and extrusion. PP/MWCNT nanocomposite pellets were characterized for rheological behavior, crystallinity, specific volume and thermal conductivity, while injection-molded samples were characterized for mechanical and electrical properties. The addition of MWCNTs does not significantly change the melting and crystallization behavior of the PP/MWCNT nanocomposites. The effect of MWCNTs on melt shear viscosity is more pronounced at low shear rates and MWCNT loadings of 1-5 wt.%. However, with the addition of up to 5 wt.% of MWCNTs, the PP/MWCNT nanocomposite still behaves like a non-Newtonian fluid. The specific volume of the PP/MWCNT nanocomposites decreases with increasing MWCNT loading, especially in the MWCNT range of 1-5 wt.%, indicating better dimensional stability. The thermal conductivity, depending on the pressure, MWCNT wt.% and temperature, did not exceed 0.35 W/m·K. The PP/MWCNT nanocomposite is electrical non-conductive up to 3 wt.%, whereas after the percolating path is created, the nanocomposite with 5 wt.% becomes semi-conductive with an electrical conductivity of 10-1 S/m. The tensile modulus, tensile strength and stress at break increase with increasing MWCNT loading, whereas the elongation at break significantly decreases with increasing MWCNT loading. The Cross and modified 2-domain Tait models are suitable for predicting the melt shear viscosity and specific volume as a function of MWCNTs, respectively. These results enable users to integrate the PP/MWCNT nanocomposites into computer aided engineering analysis.

| S-EPMC7825608 | biostudies-literature

Multi-walled carbon nanotube-induced gene expression in vitro

Project description:There is a current interest in reducing the in vivo toxicity testing of nanomaterials in animals by increasing toxicity testing using in vitro cellular assays; however, toxicological results are seldom concordant between in vivo and in vitro models. This study compared global multi-walled carbon nanotube (MWCNT)-induced gene expression from human lung epithelial and microvascular endothelial cells in monoculture and coculture with gene expression from mouse lungs exposed to MWCNT. Using a cutoff of 10% false discovery rate and 1.5 fold change, we determined that there were more concordant genes (gene expression both up- or downregulated in vivo and in vitro) expressed in both cell types in coculture than in monoculture. When reduced to only those genes involved in inflammation and fibrosis, known outcomes of in vivo MWCNT exposure, there were more disease-related concordant genes expressed in coculture than monoculture. Additionally, different cellular signaling pathways are activated in response to MWCNT dependent upon culturing conditions. As coculture gene expression better correlated with in vivo gene expression, we suggest that cellular cocultures may offer enhanced in vitro models for nanoparticle risk assessment and the reduction of in vivo toxicological testing.

2019-04-12 | GSE129640 | GEO

Poly(Butylene Succinate) Hybrid Multi-Walled Carbon Nanotube/Iron Oxide Nanocomposites: Electromagnetic Shielding and Thermal Properties.

Project description:To address the ever-increasing electromagnetic interference (EMI) pollution, a hybrid filler approach for novel composites was chosen, with a focus on EMI absorbance. Carbon nanofiller loading was limited to 0.6 vol.% in order to create a sustainable and affordable solution. Multiwall carbon nanotubes (MWCNT) and iron oxide (Fe3O4) nanoparticles were mixed in nine ratios from 0.1 to 0.6 vol.% and 8.0 to 12.0 vol.%, respectively. With the addition of surfactant, excellent particle dispersion was achieved (examined with SEM micrographs) in a bio-based and biodegradable poly(butylene succinate) (PBS) matrix. Hybrid design synergy was assessed for EMI shielding using dielectric spectroscopy in the microwave region and transmittance in the terahertz range. The shielding effectiveness (20-52 dB) was dominated by very high absorption at 30 GHz, while in the 0.1 to 1.0 THz range, transmittance was reduced by up to 6 orders of magnitude. Frequency-independent AC electrical conductivity (from 10-2 to 107 Hz) was reached upon adding 0.6 vol.% MWCNT and 10 vol.% Fe3O4, with a value of around 3.1 × 10-2 S/m. Electrical and thermal conductivity were mainly affected by the content of MWCNT filler. The thermal conductivity scaled with the filler content and reached the highest value of 0.309 W/(mK) at 25 °C with the loading of 0.6 vol.% MWCNT and 12 vol.% Fe3O4. The surface resistivity showed an incremental decrease with an increase in MWCNT loading and was almost unaffected by an increase in iron oxide loading. Thermal conductivity was almost independent of temperature in the measured range of 25 to 45 °C. The nanocomposites serve as biodegradable alternatives to commodity plastic-based materials and are promising in the field of electromagnetic applications, especially for EMI shielding.

| S-EPMC9921677 | biostudies-literature

Lung response to multi-walled carbon nanotube exposure in rats.

Project description:The projected increase in the production and use of nanomaterials is expected to result in a corresponding increase in human exposure, potentially resulting in significant morbidity and mortality. Currently, the lung toxicity of multi-walled carbon nanotubes (MWCNT), a prototype nanomaterial, was investigated in a rat model. The rats were exposed by whole-body inhalation to air (controls) or MWCNT (6 hours/day, 3 days) to result in cumulative doses of 180, 90, 45, 22.5, or 11.25 mg/m3. Lung toxicity and gene expression profiles were determined in the lungs of the control and MWCNT exposed rats one day following termination of the exposures. Moderate lung histological changes, indicative of toxicity, were detected in rats exposed to MWCNT at doses > 45 mg/m3. Changes in toxicity parameters including, lactate dehydrogenase (LDH) activity, oxidant production, cell counts of phagocytes, and cytokine levels were detected in the bronchoalveolar lavage of rats exposed to > 22.5 mg/m3 MWCNT, compared with the air controls. Lung gene expression profiling detected differences in transcript levels (fold change >1.5 and FDR p<0.05) of several genes in the rats exposed to >22.5 mg/m3 MWCNT, compared with the controls. The changes in lung toxicity and gene expression profiles exhibited a dose-response to the MWCNT administered in the rats.

2022-12-31 | GSE148869 | GEO

Improved electrochemical performance of multi-walled carbon nanotube reinforced gelatin biopolymer for transient energy storage applications.

Project description:Multi-walled carbon nanotube (MWCNT) incorporated biodegradable gelatin nanocomposites (Gel/MWCNT) have been prepared following a facile solution processing method. The Fourier-transform infrared (FTIR) spectroscopy, field emission scanning electronic microscopy (FESEM), and water contact angle (WCA) measurements revealed improved structural properties and surface morphological features of the nanocomposite films due to the incorporation of MWCNT. A four-fold decrease in the DC resistivity was obtained due to the addition of MWCNTs. The specific capacitance of the nanocomposite increased from 0.12 F/g to 12.7 F/g at a current density of 0.3 μA/cm2 due to the incorporation of 0.05 wt.% MWCNT. EIS analysis and the corresponding Nyquist plots demonstrated the contributions of the different electrical components responsible for the improved electrochemical performance were evaluated using an equivalent AC circuit. The incorporation of MWCNTs was found to reduce the charge-transfer resistance from 127 Ω to 75 Ω and increase the double-layer capacitance from 4 nF to 9 nF. The Gel/MWCNT nanocomposite demonstrated improved cyclic stability with a retention of 95% of the initial capacitance even after 5000 charging/discharging cycles. The biodegradability test showed that the nanocomposite degraded completely after 30 hours of immersion in water. This fully biocompatible nature of the nanocomposites with high specific capacitance and low charge transfer resistance may offer a promising route to fabricate a nature-friendly electrode material for energy storage applications.

| S-EPMC10635558 | biostudies-literature

Control of neuronal network organization by chemical surface functionalization of multi-walled carbon nanotube arrays.

Project description:Carbon nanotube substrates are promising candidates for biological applications and devices. Interfacing of these carbon nanotubes with neurons can be controlled by chemical modifications. In this study, we investigated how chemical surface functionalization of multi-walled carbon nanotube arrays (MWNT-A) influences neuronal adhesion and network organization. Functionalization of MWNT-A dramatically modifies the length of neurite fascicles, cluster inter-connection success rate, and the percentage of neurites that escape from the clusters. We propose that chemical functionalization represents a method of choice for developing applications in which neuronal patterning on MWNT-A substrates is required.

| S-EPMC3103516 | biostudies-literature

Polypyrrole-multi walled carbon nanotube hybrid material supported Pt NPs for hydrogen evolution from the hydrolysis of MeAB at mild conditions.

Project description:Herein, we report a facile method for the preparation of polypyrrole-multi walled carbon nanotube hybrid material including Pt nanoparticles (Pt@PPy-MWCNT NPs) and the use in methylamine borane (MeAB) for hydrolysis reaction at mild conditions. The prepared catalyst of Pt@PPy-MWCNT NPs was characterized by some advanced analytical methods. The catalytic experiments showed the Pt@PPy-MWCNT NPs can catalyze MeAB in aquatic solution with high catalytical performance at mild conditions. The reaction rate of catalytic hydrolysis with Pt@PPy-MWCNT NPs was found to be -d[CH3NH2BH3]/dt?=?+?d[H2]/3dt?=?kobs[Pt@PPy-MWCNT]1.19 [MeAB]0.88. The TOF value for the hydrolysis of MeAB catalyzed with Pt@PPy-MWCNT NPs was detected to be 10234.2 1/h (170.57 1/min) which is very high compared with TOF values found for other catalysts. Enthalpy, entropy and activation energy for the hydrolysis of MeAB were calculated to be 31.57?kJ?mol-1, -119.97?J?mol-1 K and 34.27?kJ?mol-1, respectively.

| S-EPMC6898010 | biostudies-literature

Selective Nonenzymatic Amperometric Detection of Lactic Acid in Human Sweat Utilizing a Multi-Walled Carbon Nanotube (MWCNT)-Polypyrrole Core-Shell Nanowire.

Project description:Lactic acid plays an important role as a biochemical indicator for sports medicine and clinical diagnosis. The detection of lactic acid in sweat is a promising technique without any intrusive inconvenience or risk of infection. In this study, we present a selective nonenzymatic amperometric detection method for lactic acid in human sweat utilizing a multi-wall carbon nanotube (MWCNT)-polypyrrole core-shell nanowire. Because polypyrrole is a p-type conducting polymer, onto which anions are exclusively doped, leading to charge transfer, it offers selective detection for lactate anions at a specific potential, while being inert to the neutral and cationic species contained in human sweat. A chronoamperometric study reveals good sensing performance for lactic acid with a high sensitivity of 2.9 μA mM-1 cm-2 and detection limit of 51 μM. Furthermore, the MWCNT-polypyrrole nanowire exhibits excellent selectivity for lactic acid over interfering species, such as sodium chloride, glucose, urea, and riboflavin, which coexist with lactic acid in sweat. Finally, a nonenzymatic amperometric sensor for the selective detection of lactic acid in human sweat is demonstrated on commercial flexible electrodes. The results demonstrate the potential applications of the MWCNT-polypyrrole core-shell nanowire as a nonenzymatic amperometric lactate sensor.

| S-EPMC7559985 | biostudies-literature

Multi-fractal hierarchy of single-walled carbon nanotube hydrophobic coatings.

Project description:A hierarchical structure is an assembly with a multi-scale morphology and with a large and accessible surface area. Recent advances in nanomaterial science have made increasingly possible the design of hierarchical surfaces with specific and tunable properties. Here, we report the fractal analysis of hierarchical single-walled carbon nanotube (SWCNT) films realized by a simple, rapid, reproducible, and inexpensive filtration process from an aqueous dispersion, then deposited by drytransfer printing method on several substrates, at room temperature. Furthermore, by varying the thickness of carbon nanotube random networks, it is possible tailoring their wettability due to capillary phenomena in the porous films. Moreover, in order to describe the wetting properties of such surfaces, we introduce a two-dimensional extension of the Wenzel-Cassie-Baxter theory. The hierarchical surface roughness of SWCNT coatings coupled with their exceptional and tunable optical and electrical properties provide an ideal hydrophobic composite surface for a new class of optoelectronic and nanofluidic devices.

| S-EPMC4341200 | biostudies-literature

Lung carcinogenicity of inhaled multi-walled carbon nanotube in rats.

Project description:BackgroundMulti-walled carbon nanotubes (MWCNTs) constitute one of the most promising types of nanomaterials in industry today. With their increasing use, the potential toxicity and carcinogenicity of MWCNT needs to be evaluated in bioassay studies using rodents. Since humans are mainly exposed to MWCNT by inhalation, we performed a 104-week carcinogenicity study using whole-body inhalation exposure chambers with a fibrous straight type of MWCNT at concentrations of 0, 0.02, 0.2, and 2 mg/m3 using male and female F344 rats.ResultsLung carcinomas, mainly bronchiolo-alveolar carcinoma, and combined carcinomas and adenomas were significantly increased in males exposed to 0.2 and 2 mg/m3 MWNT-7 and in females exposed to 2 mg/m3 MWNT-7 compared to the clean air control group. However, no development of pleural mesothelioma was observed. Concentration-dependent toxic effects in the lung such as epithelial hyperplasia, granulomatous change, localized fibrosis, and alteration in BALF parameters were found in MWNT-7 treatment groups of both sexes. There were no MWNT-7-specific macroscopic findings in the other organs, including the pleura and peritoneum. Absolute and relative lung weights were significantly elevated in male rats exposed to 0.2 and 2 mg/m3 MWNT-7 and in all exposed female groups. The lung burdens of MWNT-7 were clearly increased in a concentration-dependent as well as a duration-dependent manner.ConclusionThere is clear evidence that MWNT-7 is carcinogenic to the lungs of male and female F344 rats, however no plural mesothelioma was observed.

| S-EPMC5064785 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data