Dataset Information

Modification of PSf/SPSf Blended Porous Support for Improving the Reverse Osmosis Performance of Aromatic Polyamide Thin Film Composite Membranes.

ABSTRACT: In this study, modification of polysulfone (PSf)/sulfonated polysulfone (SPSf) blended porous ultrafiltration (UF) support membranes was proposed to improve the reverse osmosis (RO) performance of aromatic polyamide thin film composite (TFC) membranes. The synergistic effects of solvent, polymer concentration, and SPSf doping content in the casting solution were investigated systematically on the properties of both porous supports and RO membranes. SEM and AFM were combined to characterize the physical properties of the membranes, including surface pore natures (porosity, mean pore radius), surface morphology, and section structure. A contact angle meter was used to analyze the membrane surface hydrophilicity. Permeate experiments were carried out to evaluate the separation performances of the membranes. The results showed that the PSf/SPSf blended porous support modified with 6 wt % SPSf in the presence of DMF and 14 wt % PSf had higher porosity, bigger pore diameter, and a rougher and more hydrophilic surface, which was more beneficial for fabrication of a polyamide TFC membrane with favorable reverse osmosis performance. This modified PSf/SPSf support endowed the RO membrane with a more hydrophilic surface, higher water flux (about 1.2 times), as well as a slight increase in salt rejection than the nascent PSf support. In a word, this work provides a new facile method to improve the separation performance of polyamide TFC RO membranes via the modification of conventional PSf porous support with SPSf.

SUBMITTER: Liu LF

PROVIDER: S-EPMC6404368 | biostudies-literature | 2018 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Modification of PSf/SPSf Blended Porous Support for Improving the Reverse Osmosis Performance of Aromatic Polyamide Thin Film Composite Membranes.

Liu Li-Fen LF Gu Xing-Ling XL Xie Xin X Li Rui-Han RH Yu Chun-Yang CY Song Xiao-Xiao XX Gao Cong-Jie CJ

Polymers 20180620 6

In this study, modification of polysulfone (PSf)/sulfonated polysulfone (SPSf) blended porous ultrafiltration (UF) support membranes was proposed to improve the reverse osmosis (RO) performance of aromatic polyamide thin film composite (TFC) membranes. The synergistic effects of solvent, polymer concentration, and SPSf doping content in the casting solution were investigated systematically on the properties of both porous supports and RO membranes. SEM and AFM were combined to characterize the p ...[more]

PMID: 30966720

Similar Datasets

Project description:Given the huge significance of organic solvents in several industrial processes, the use of membranes for recovering the solvents has evolved into an industrially viable process. The current work has been focused on studying the effect of minor changes in the chemistry of the reacting monomers on the organic solvent nanofiltration/solvent resistance nanofiltration (OSN/SRNF) performance of the membranes. The two aliphatic amines with varying aliphatic chain lengths between primary and secondary amines were selected for this purpose. Based on the structure of the resultant active layer, the Janus nanofiltration performance of the membrane was evaluated. The two membranes, 4A-TPC@crosslinked PAN and 4A-3P@crosslinked PAN were fabricated by using two different tetra-amines, 4A (N,N'-bis(3-aminopropyl)ethylenediamine) and 4A-3P (N,N'-Bis(2-aminoethyl)-1,3-propanediamine) crosslinked with terephthaloyl chloride (TPC) on a crosslinked polyacryonitrile (PAN) support through interfacial polymerization (IP). The presence of multiple hydrophobic -CH2- groups in the structures of the aliphatic amines 4A and 4A-3P develops hydrophobic sites in the hydrophilic polyamide active layers of the membranes. In addition, 4A has two secondary amino groups separated by ethylene (-CH2-CH2-) groups, whereas in 4A-3P, the two secondary amino groups are separated by propylene (-CH2-CH2-CH2-) leading to variation in the structural features and performance of the two membranes. Both membranes were fully characterized by several membrane characterization techniques and applied for OSN/SRNF using both polar (methanol, ethanol, and isopropanol) and non-polar (n-hexane and toluene) solvents. Different dyes (Congo red, Eriochrome black T, and Methylene blue) were used as model solutes during the filtration experiment. The 4A-3P-TPC@crosslinked PAN showed n-hexane and toluene flux of 109.9 LMH and 95.5 LMH, respectively. The Congo red (CR) showed the highest rejection, reaching 99.1% for the 4A-TPC@Crosslinked PAN membrane and 98.8% for the 4A-3P-TPC@Crosslinked PAN membrane.

Dataset Information

Modification of PSf/SPSf Blended Porous Support for Improving the Reverse Osmosis Performance of Aromatic Polyamide Thin Film Composite Membranes.

Publications

Modification of PSf/SPSf Blended Porous Support for Improving the Reverse Osmosis Performance of Aromatic Polyamide Thin Film Composite Membranes.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets