Shape Memory Polyurethanes Based on Zwitterionic Hard Segments.
Ontology highlight
ABSTRACT:
SUBMITTER: Fu S
PROVIDER: S-EPMC6418923 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Novel fast response shape-memory polyurethanes were prepared from bio-based polyols, diphenyl methane diisocyanate and butane diol for the first time. The bio-based polyester polyols were synthesized from 9-hydroxynonanoic acid, a product obtained by ozonolysis of fatty acids extracted from soy oil and castor oil. The morphology of polyurethanes was investigated by synchrotron ultra-small angle X-ray scattering, which revealed the inter-domain spacing between the hard and soft phases, the degree of phase separation, and the level of intermixing between the hard and soft phases. We also conducted thorough investigations of the thermal, mechanical, and dielectric properties of the polyurethanes, and found that high crystallization rate of the soft segment gives these polyurethanes unique properties suitable for shape-memory applications, such as adjustable transition temperatures, high degree of elastic elongations, and good mechanical strength. These materials are also potentially biodegradable and biocompatible, therefore suitable for biomedical and environmental applications.
| S-EPMC5621613 | biostudies-literature
Project description:In this report, the synthesis of poly(?-pentadecalactone) (PPDL) (co)polymers and their incorporation into polyurethanes (PUs) are reported. Optimal conditions for the ring-opening polymerization (ROP) of ?-pentadecalactone (PDL) using dibutyltin dilaurate catalyst were established. For the synthesis of linear and crosslinked PUs, 50 kDa poly(?-caprolactone) (PCL) and 1,6-hexamethylenediisocyanate (HDI) were used. The obtained polyurethanes were characterized by Attenuated Total Reflectance Fourier-Transform Infrared spectroscopy (AT-FTIR), differential scanning calorimetry (DSC), and dynamical mechanical analysis (DMA). The DMA of the selected sample showed a rubbery plateau on the storage modulus versus temperature curve predicting shape memory behavior. Indeed, good shape memory performances were obtained with shape fixity (Rf) and shape recovery (Rr) ratios.
| S-EPMC7563291 | biostudies-literature
Project description:The presented research focuses on the synthesis and structure-properties relationship of poly(carbonate-urea-urethane) (PCUU) systems including investigations on shape-memory effect capability. Furthermore, we approached the topic from a broader perspective by conducting extensive analysis of the relationship between the synthesized compounds and the results of computer simulations by means of the Monte Carlo method. For the first time, by using a unique simulation tool, the dynamic lattice liquid model (DLL), all steps of multi-step synthesis of these materials were covered by the simulations. Furthermore, broad thermal, mechanical, and thermomechanical characterization of synthesized PCUUs was performed, as well as determining the shape-memory properties. PCUUs exhibited good mechanical properties with a tensile strength above 20 MPa, elongation at break around 800%, and an exhibited shape-memory effect with shape fixity and shape recovery ratios above 94% and 99%, respectively. The dynamic lattice liquid model was employed to show the products and their molar mass distribution, as well as monomer conversion or the dispersity index for individual reaction steps. The results obtained in the following manuscript allow the planning of syntheses for the PCUUs of various structures, including crosslinked and soluble systems, which can provide a broad variety of applications of these materials, as well as a better understanding of the composition-properties relationship.
| S-EPMC9266580 | biostudies-literature
Project description:Thermoresponsive shape memory polymers are stimuli-responsive materials whose shape is modulated by heat. They have been investigated as smart materials in a variety of biomedical, industrial and aerospace applications. The vast majority of shape memory polymers have been limited to those prepared from organic polymers. In this present work, shape memory polymers comprised of inorganic silicon-containing polymer segments (polydimethylsiloxane, PDMS) and organic poly(ε-caprolactone) (PCL) segments were developed. Because of its low T g, PDMS served as a highly effective soft segment. The photochemical cure of diacrylated PCL n -block-PDMS37-block-PCL n macromers with tailored PCL segment lengths produced networks with excellent mechanical properties, shape fixity, and shape recovery.
| S-EPMC6782064 | biostudies-literature
Project description:In this paper, we developed a photo-thermo staged-responsive shape-memory polymer network which has a unique ability of being spontaneously photo-responsive deformable and thermo-responsive shape recovery. This new type of shape-memory polyurethane network (A-SMPUs) was successfully synthesized with 4,4-azodibenzoic acid (Azoa), hexamethylenediisocyanate (HDI) and polycaprolactone (PCL), followed by chemical cross-linking with glycerol (Gl). The structures, morphology, and shape-memory properties of A-SMPUs have been carefully investigated. The results demonstrate that the A-SMPUs form micro-phase separation structures consisting of a semi-crystallized PCL soft phase and an Azoa amorphous hard phase that could influence the crystallinity of PCL soft phases. The chemical cross-linking provided a stable network and good thermal stability to the A-SMPUs. All A-SMPUs exhibited good triple-shape-memory properties with higher than 97% shape fixity ratio and 95% shape recovery ratio. Additionally, the A-SMPUs with higher Azoa content exhibited interesting photo-thermo two-staged responsiveness. A pre-processed film with orientated Azoa structure exhibited spontaneous curling deformation upon exposing to ultraviolet (UV) light, and curling deformation is constant even under Vis light. Finally, the curling deformation can spontaneously recover to the original shape by applying a thermal stimulus. This work demonstrates new synergistically multi-responsive SMPUs that will have many applications in smart science and technology.
| S-EPMC6431991 | biostudies-literature
Project description:Porous shape memory alloys (SMAs), including NiTi and Ni-free Ti-based alloys, are unusual materials for hard-tissue replacements because of their unique superelasticity (SE), good biocompatibility, and low elastic modulus. However, the Ni ion releasing for porous NiTi SMAs in physiological conditions and relatively low SE for porous Ni-free SMAs have delayed their clinic applications as implantable materials. The present article reviews recent research progresses on porous NiTi and Ni-free SMAs for hard-tissue replacements, focusing on two specific topics: (i) synthesis of porous SMAs with optimal porous structure, microstructure, mechanical, and biological properties; and, (ii) surface modifications that are designed to create bio-inert or bio-active surfaces with low Ni releasing and high biocompatibility for porous NiTi SMAs. With the advances of preparation technique, the porous SMAs can be tailored to satisfied porous structure with porosity ranging from 30% to 85% and different pore sizes. In addition, they can exhibit an elastic modulus of 0.4?15 GPa and SE of more than 2.5%, as well as good cell and tissue biocompatibility. As a result, porous SMAs had already been used in maxillofacial repairing, teeth root replacement, and cervical and lumbar vertebral implantation. Based on current research progresses, possible future directions are discussed for "property-pore structure" relationship and surface modification investigations, which could lead to optimized porous biomedical SMAs. We believe that porous SMAs with optimal porous structure and a bioactive surface layer are the most competitive candidate for short-term and long-term hard-tissue replacement materials.
| S-EPMC6164106 | biostudies-other
Project description:The synthesis of thermoset shape memory polymer (SMP) polyurethanes from symmetric, aliphatic alcohols and diisocyanates has previously demonstrated excellent biocompatibility in short term in vitro and in vivo studies, although long term stability has not been investigated. Here we demonstrate that while rapid oxidation occurs in these thermoset SMPs, facilitated by the incorporation of multi-functional, branching amino groups, byproduct analysis does not indicate toxicological concern for these materials. Through complex multi-step chemical reactions, chain scission begins from the amines in the monomeric repeat units, and results, ultimately, in the formation of carboxylic acids, secondary and primary amines; the degradation rate and product concentrations were confirmed using liquid chromatography mass spectrometry, in model compound studies, yielding a previously unexamined degradation mechanism for these biomaterials. The rate of degradation is dependent on the hydrogen peroxide concentration, and comparison of explanted samples reveals a much slower rate in vivo compared to the widely accepted literature in vitro real-time equivalent of 3% H2O2. Cytotoxicity studies of the material surface, and examination of the degradation product accumulations, indicate that degradation has negligible impact on cytotoxicity of these materials. STATEMENT OF SIGNIFICANCE:This paper presents an in-depth analysis on the degradation of porous, shape memory polyurethanes (SMPs), including traditional surface characterization as well as model degradation compounds with absolute quantification. This combination of techniques allows for determination of rates of degradation as well as accumulation of individual degradation products. These behaviors are used for in vivo-in vitro comparisons for determination of real time degradation rates. Previous studies have primarily been limited to surface characterization without examination of degradation products and accumulation rates. To our knowledge, our work presents a unique example where a range of material scales (atomistic-scale model compounds along with macroscopic porous SMPs) are used in conjunction with ex planted samples for calculation of degradation rates and toxicological risk.
| S-EPMC5821471 | biostudies-literature
Project description:The number of cross-links in the non-linear polyurethane structure is the basic factor affecting its properties. Selected properties of aliphatic polyurethanes with soft segments made of different amounts of polycaprolactonetriol, polycaprolactonediol and synthetic, telechelic poly([R,S]-3-hydroxybutyrate) were determined. On the basis of changes in polyurethane properties, the correlation between these properties and the construction of soft segments was found. The structure of polyurethanes, their morphology, hydrophilicity, thermal and mechanical properties were examined. These properties were changed linearly up to 15% content of polycaprolactonetriol in soft segments. A further increase in the amount of triol causes that these properties are mainly determined by the high number of cross-links.
| S-EPMC7284939 | biostudies-literature
Project description:Biopolymer-based composites enable to combine different functionalities using renewable materials and cost-effective routes. Here we fabricate novel thermoresponsive photonic films combining cellulose nanocrystals (CNCs) with a polydiolcitrate elastomer exhibiting shape memory properties, known as hydroxyl-dominant poly(dodecanediol-co-citrate) (PDDC-HD). Iridescent films of CNCs are first made by evaporation-induced self-assembly, then embedded in the PDDC-HD prepolymer, and finally cured to obtain a cross-linked composite with shape memory properties. The fabricated samples are characterized by polarized optical microscopy, scanning electron microscopy, and thermomechanical cycling. The obtained hybrid material combines both intense structural coloration and shape memory effect. The association of stiff cellulose nanocrystals and soft polydiolcitrate elastomer enhances the overall mechanical properties (increased modulus and reduced brittleness). This hybrid nanocomposite takes advantage of two promising materials and expands their possibilities to cover a wide range of potential applications as multiresponsive devices and sensors. As they perform from room to body temperatures, they could be also good candidates for biomedical applications.
| S-EPMC5495156 | biostudies-literature
Project description:Biofilms have been a long-standing challenge for healthcare, water transport, and many other industries. They lead to bacterial growth and infections in animals, food products, and humans, cause premature removal of the implanted materials or devices from patients, and facilitate fouling and corrosion of metals. Despite some published and patented methods on minimizing the effects of biofilms for a short period (less than two weeks), there exists no successful means to mitigate or prevent the long-term formation of biofilms. It is even more challenging to integrate critical anti-fouling properties with other needed physical and chemical properties for a range of applications. In this study, we developed a novel approach for combining incompatible, highly polar anti-fouling groups with less polar, mechanically modifying groups into one material. A multifunctional carboxybetaine precursor was designed and introduced into polyurethane. The carboxybetaine precursors undergo rapid, self-catalyzed hydrolysis at the water/material interface and provide critical anti-fouling properties that lead to undetectable bacterial attachment and zero biofilm formation after six months of constant exposure to Pseudomonas aeruginosa and Staphylococcus epidermidis under the static condition in a nutrient-rich medium. This zwitterionic polyurethane is the first material to demonstrate both critical anti-biofilm properties and tunable mechanical properties and directly validates the unproven anti-fouling strategy and hypothesis for biofilm formation prevention. This approach of designing 'multitasking materials' will be useful for the development of next generation anti-fouling materials for a variety of applications.
| S-EPMC8159170 | biostudies-literature