Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Characterization and Structure⁻Property Relationships of Organic⁻Inorganic Hybrid Composites Based on Aluminum⁻Magnesium Hydroxycarbonate and Azo Chromophore.

ABSTRACT: In this study, novel organic⁻inorganic composites were prepared by the complexation of dicarboxylic azo dye (AD) with aluminum⁻magnesium hydroxycarbonate (AlMg⁻LH). This procedure provides an effective method for the stabilization of dicarboxylic organic chromophores on an AlMg-LH host. The structures of the hybrid composites were examined by X-ray diffraction (XRD), secondary ion mass spectrometry (TOF-SIMS), 27-Al solid-state nuclear magnetic resonance (NMR) spectroscopy, thermogravimetric analysis (TGA) and scanning transmission electron microscopy (STEM). The TOF-SIMS method was applied to investigate the metal⁻dye interactions and to monitor the thermal stability of the organic⁻inorganic complexes. Secondary ion mass spectrometry confirmed the presence of a characteristic peak for C18H10O₅N₂Mg₂2+, indicating that both carboxylic groups interacted with AlMg-LH by forming complexes with two Mg2+ ions. Modification with hybrid pigments affected the crystal structure of the AlMg-LH mineral, as shown by the appearance of new peaks on the X-ray diffraction patterns. Adsorption of the dicarboxylic chromophore not only led to significantly enhanced solvent resistance but also improved the thermal and photostability of the hybrid pigments. We propose a possible arrangement of the azo dye in the inorganic matrix, as well as the presumed mechanism of stabilization.

SUBMITTER: Marzec A

PROVIDER: S-EPMC6429098 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

New Organic/Inorganic Pigments Based on Azo Dye and Aluminum-Magnesium Hydroxycarbonates with Various Mg/Al Ratios.

Project description:This study set out to investigate the impact of aluminum-magnesium hydroxycarbonates (LHs) with various Mg/Al ratios on the formation of hybrid pigments. The colorants were also evaluated for their flame-retardant properties. In the first part of the study, the hybrid pigments were submitted to comprehensive characterization using time-of-flight secondary ion mass spectrometry (TOF-SIMS), 27Al solid-state nuclear magnetic resonance (NMR) spectroscopy, powder X-ray diffraction analysis (XRD), thermogravimetric analysis (TGA), and N2 adsorption as well as scanning and transmission electron microscopy (SEM/STEM). The relationship between the Mg/Al ratios of the LH carriers and the formation of lake pigments was explored. The TOF-SIMS spectrum of LH modified with azo chromophore (AC) showed an intense peak for the C19H15O5N2Mg+ ion, confirming metal-dye interactions. Incorporation of the organic colorant into the LH host enhanced its resistance to dissolution in organic solvent (butyl acetate), as well as improving its color stability under elevated temperatures. The second part of the study evaluated the flammability of ethylene-norbornene (EN) composites, in which the pigments had been applied as colorants. Cone calorimetry revealed that addition of the organic-inorganic pigments resulted in a substantial improvement of the flame retardancy, reflected by the decreased values of the heat release rate (HRRMAX) and total heat release parameter (THR) of the EN composites in comparison to a neat sample (unfilled EN).

| S-EPMC6515457 | biostudies-literature

Thermal property and structural molecular dynamics of organic-inorganic hybrid perovskite 1,4-butanediammonium tetrachlorocuprate.

Project description:We investigate the thermal behaviour and physical properties of the crystals of the organic inorganic hybrid perovskite [(NH3)(CH2)4(NH3)]CuCl4. The compound's thermal stability curve as per thermogravimetric analysis exhibits a stable state up to ∼495 K, while the weight loss observed near 538 K corresponds to partial thermal decomposition. The 1H nuclear magnetic resonance (NMR) chemical shifts for NH3 change more significantly with temperature than those for CH2, because the organic cation motion is enhanced at both ends of the organic chain. The 13C NMR chemical shifts for the 'CH2-1' units of the chain show an anomalous change, and those for 'CH2-2' (units closer to NH3) are shifted sharply. Additionally, the 14N NMR spectra reflect the changes of local symmetry near T C (=323 K). Moreover, the 13C T 1ρ values for CH2-2 are smaller than those for CH2-1, and the 13C T 1ρ data curve for CH2-1 exhibits an anomalous behaviour between 260 and 310 K. These smaller T 1ρ values at lower temperatures indicate that 1H and 13C in the organic chains are more flexible at these temperatures. The NH3 group is attached to both ends of the organic chain, and NH3 forms a N-H⋯Cl hydrogen bond with the Cl ion of inorganic CuCl4. When H and C are located close to the paramagnetic Cu2+ ion, the T 1ρ value is smaller than when these are located far from the paramagnetic ion.

| S-EPMC9056822 | biostudies-literature

Metal-organic framework and inorganic glass composites.

Project description:Metal-organic framework (MOF) glasses have become a subject of interest as a distinct category of melt quenched glass, and have potential applications in areas such as ion transport and sensing. In this paper we show how MOF glasses can be combined with inorganic glasses in order to fabricate a new family of materials composed of both MOF and inorganic glass domains. We use an array of experimental techniques to propose the bonding between inorganic and MOF domains, and show that the composites produced are more mechanically pliant than the inorganic glass itself.

| S-EPMC7669864 | biostudies-literature

Biomimetic inorganic-organic hybrid nanoparticles from magnesium-substituted amorphous calcium phosphate clusters and polyacrylic acid molecules.

Project description:Amorphous calcium phosphate (ACP) has been widely found during bone and tooth biomineralization, but the meta-stability and labile nature limit further biomedical applications. The present study found that the chelation of polyacrylic acid (PAA) molecules with Ca2+ ions in Mg-ACP clusters (~2.1 ± 0.5 nm) using a biomineralization strategy produced inorganic-organic Mg-ACP/PAA hybrid nanoparticles with better thermal stability. Mg-ACP/PAA hybrid nanoparticles (~24.0 ± 4.8 nm) were pH-responsive and could be efficiently digested under weak acidic conditions (pH 5.0-5.5). The internalization of assembled Mg-ACP/PAA nanoparticles by MC3T3-E1 cells occurred through endocytosis, indicated by laser scanning confocal microscopy and cryo-soft X-ray tomography. Our results showed that cellular lipid membranes remained intact without pore formation after Mg-ACP/PAA particle penetration. The assembled Mg-ACP/PAA particles could be digested in cell lysosomes within 24 h under weak acidic conditions, thereby indicating the potential to efficiently deliver encapsulated functional molecules. Both the in vitro and in vivo results preliminarily demonstrated good biosafety of the inorganic-organic Mg-ACP/PAA hybrid nanoparticles, which may have potential for biomedical applications.

| S-EPMC7841502 | biostudies-literature

Hybrid organic-inorganic polariton laser.

Project description:Organic materials exhibit exceptional room temperature light emitting characteristics and enormous exciton oscillator strength, however, their low charge carrier mobility prevent their use in high-performance applications such as electrically pumped lasers. In this context, ultralow threshold polariton lasers, whose operation relies on Bose-Einstein condensation of polaritons - part-light part-matter quasiparticles, are highly advantageous since the requirement for high carrier injection no longer holds. Polariton lasers have been successfully implemented using inorganic materials owing to their excellent electrical properties, however, in most cases their relatively small exciton binding energies limit their operation temperature. It has been suggested that combining organic and inorganic semiconductors in a hybrid microcavity, exploiting resonant interactions between these materials would permit to dramatically enhance optical nonlinearities and operation temperature. Here, we obtain cavity mediated hybridization of GaAs and J-aggregate excitons in the strong coupling regime under electrical injection of carriers as well as polariton lasing up to 200?K under non-resonant optical pumping. Our demonstration paves the way towards realization of hybrid organic-inorganic microcavities which utilise the organic component for sustaining high temperature polariton condensation and efficient electrical injection through inorganic structure.

| S-EPMC5595872 | biostudies-other

A hybrid organic-inorganic perovskite dataset.

Project description:Hybrid organic-inorganic perovskites (HOIPs) have been attracting a great deal of attention due to their versatility of electronic properties and fabrication methods. We prepare a dataset of 1,346 HOIPs, which features 16 organic cations, 3 group-IV cations and 4 halide anions. Using a combination of an atomic structure search method and density functional theory calculations, the optimized structures, the bandgap, the dielectric constant, and the relative energies of the HOIPs are uniformly prepared and validated by comparing with relevant experimental and/or theoretical data. We make the dataset available at Dryad Digital Repository, NoMaD Repository, and Khazana Repository (http://khazana.uconn.edu/), hoping that it could be useful for future data-mining efforts that can explore possible structure-property relationships and phenomenological models. Progressive extension of the dataset is expected as new organic cations become appropriate within the HOIP framework, and as additional properties are calculated for the new compounds found.

| S-EPMC5423391 | biostudies-literature

Hyaluronic-Acid-Based Organic-Inorganic Composites for Biomedical Applications.

Project description:Applications of natural hyaluronic acid (HYH) for the fabrication of organic-inorganic composites for biomedical applications are described. Such composites combine unique functional properties of HYH with functional properties of hydroxyapatite, various bioceramics, bioglass, biocements, metal nanoparticles, and quantum dots. Functional properties of advanced composite gels, scaffold materials, cements, particles, films, and coatings are described. Benefiting from the synergy of properties of HYH and inorganic components, advanced composites provide a platform for the development of new drug delivery materials. Many advanced properties of composites are attributed to the ability of HYH to promote biomineralization. Properties of HYH are a key factor for the development of colloidal and electrochemical methods for the fabrication of films and protective coatings for surface modification of biomedical implants and the development of advanced biosensors. Overcoming limitations of traditional materials, HYH is used as a biocompatible capping, dispersing, and structure-directing agent for the synthesis of functional inorganic materials and composites. Gel-forming properties of HYH enable a facile and straightforward approach to the fabrication of antimicrobial materials in different forms. Of particular interest are applications of HYH for the fabrication of biosensors. This review summarizes manufacturing strategies and mechanisms and outlines future trends in the development of functional biocomposites.

| S-EPMC8434239 | biostudies-literature

A hybrid organic-inorganic polariton LED.

Project description:Polaritons are quasi-particles composed of a superposition of excitons and photons that can be created within a strongly coupled optical microcavity. Here, we describe a structure in which a strongly coupled microcavity containing an organic semiconductor is coupled to a second microcavity containing a series of weakly coupled inorganic quantum wells. We show that optical hybridisation occurs between the optical modes of the two cavities, creating a delocalised polaritonic state. By electrically injecting electron-hole pairs into the inorganic quantum-well system, we are able to transfer energy between the cavities and populate organic-exciton polaritons. Our approach represents a new strategy to create highly efficient devices for emerging 'polaritonic' technologies.

| S-EPMC6804868 | biostudies-other

Mapping Structure-Property Relationships of Organic Color Centers.

Project description:Organic color centers are an emergent class of quantum emitters that hold vast potential for applications in bioimaging, chemical sensing, and quantum information processing. Here, we show that these synthetic color centers follow interesting structure-property relationships through comparative spectral studies of 14 purified single-walled carbon nanotube chiralities and 30 different functional groups that vary in electron-withdrawing capability and bonding configurations. The defect emission is tunable by as much as 400 meV in the near-infrared as a function of host structure and the chemical nature of the color centers. However, the emission energy is nearly free from chiral angle and family patterns of the nanotube host (although this strongly depends on the nanotube diameter), suggesting that a trapped exciton at the organic color centers to some degree electronically decouples from the one-dimensional semiconductor host. Our findings provide important insights for designing and controlling this new family of synthetic color centers.

| S-EPMC6874404 | biostudies-literature

Bioinspired Fabrication of DNA-Inorganic Hybrid Composites Using Synthetic DNA.

Project description:Nucleic acid nanostructures have attracted significant interest as potential therapeutic and diagnostic platforms due to their intrinsic biocompatibility and biodegradability, structural and functional diversity, and compatibility with various chemistries for modification and stabilization. Among the fabrication approaches for such structures, the rolling circle techniques have emerged as particularly promising, producing morphologically round, flower-shaped nucleic acid particles: typically hybrid composites of long nucleic acid strands and inorganic magnesium pyrophosphate (Mg2PPi). These constructs are known to form via anisotropic nucleic acid-driven crystallization in a sequence-independent manner, rendering monodisperse and densely packed RNA or DNA-inorganic composites. However, it still remains to fully explore how flexible polymer-like RNA or DNA strands (acting as biomolecular additives) mediate the crystallization process of Mg2PPi and affect the structure and properties of the product crystals. To address this, we closely examined nanoscale details to mesoscopic features of Mg2PPi/DNA hybrid composites fabricated by two approaches, namely rolling circle amplification (RCA)-based in situ synthesis and long synthetic DNA-mediated crystallization. Similar to the DNA constructs fabricated by RCA, the rapid crystallization of Mg2PPi was retarded on a short-range order when we precipitated the crystals in the presence of presynthesized long DNA, which resulted in effective incorporation of biomolecular additives such as DNA and enzymes. These findings further provide a more feasible way to encapsulate bioactive enzymes within DNA constructs compared to in situ RCA-mediated synthesis, i.e., by not only protecting them from possible denaturation under the reaction conditions but also preventing nonselective association of proteins arising from the RCA reaction mixtures.

| S-EPMC6439439 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data