Dataset Information

Mechanosynthesis of Photochromic Oligophenyleneimines: Optical, Electrochemical and Theoretical Studies.

ABSTRACT: In this work, two oligophenyleneimines type pentamers with terminal aldehydes, designated as DAFCHO (4,4'-((((((2,5-bis(octyloxy)-1,4-phenylene)bis(methanylylidene))bis(azanyl ylidene))bis(9H-fluorene-7,2-diyl))bis(azanylylidene))bis(methanylylidene))bis(2,5-bis(octyloxy) benzaldehyde)) and FDACHO (4,4'-((((((2,5-bis(octyloxy)-1,4-phenylene)bis(methanylylidene))bis (azanylylidene))bis(4,1-phenylene))bis(azanylylidene))bis(methanylylidene))bis(2,5-bis(octyloxy) benzaldehyde)) were synthesized by mechanochemistry method using 2,5-bis(octyloxy) terephtal aldehyde and 2,7-diaminofluorene or 1,4-phenylenediamine. All compounds were spectroscopically characterized using ¹H and 13C-NMR, FT-IR and mass spectrometry MALDITOF. The optical properties of the compounds were analyzed by UV-vis spectroscopy using different solvents. We observed that DAFCHO and FDACHO exhibit interesting photochromic properties when they are dissolved in chloroform and exposed to sunlight for 3, 5 and 10 min. The value of the energy band gap was calculated from the absorption spectra without irradiation Egap(optical). It was 2.50 eV for DAFCHO in chloroform solution, and it decreased to 2.34 eV when it is in films. For FDACHO, it was 2.41 eV in solution and 2.27 eV in film. HOMO (Highest Occupied Molecular Orbital), LUMO (Lowest Unoccupied Molecular Orbital) and Egap(electrochemical) values were obtained by electrochemical studies. The results indicate that the compounds can be considered as organic semiconductors since their values are 2.35 eV for DAFCHO and 2.06 eV for FDACHO. The structural and electronic properties of the compounds were corroborated with a DFT (Density Functional Theory) study.

SUBMITTER: Amado-Briseno MA

PROVIDER: S-EPMC6429622 | biostudies-literature | 2019 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Mechanosynthesis of Photochromic Oligophenyleneimines: Optical, Electrochemical and Theoretical Studies.

Amado-Briseño Miguel Angel MA Zárate-Hernández Luis Ángel LÁ Alemán-Ayala Karina K Coreño Alonso Oscar O Cruz-Borbolla Julián J Vásquez-Pérez José Manuel JM Reyes-Cruz Víctor Esteban VE Veloz-Rodríguez María Aurora MA Rueda-Soriano Esteban E Pandiyan Thangarasu T Vázquez-García Rosa Angeles RA

Molecules (Basel, Switzerland) 20190228 5

In this work, two oligophenyleneimines type pentamers with terminal aldehydes, designated as DAFCHO (4,4'-((((((2,5-bis(octyloxy)-1,4-phenylene)bis(methanylylidene))bis(azanyl ylidene))bis(9H-fluorene-7,2-diyl))bis(azanylylidene))bis(methanylylidene))bis(2,5-bis(octyloxy) benzaldehyde)) and FDACHO (4,4'-((((((2,5-bis(octyloxy)-1,4-phenylene)bis(methanylylidene))bis (azanylylidene))bis(4,1-phenylene))bis(azanylylidene))bis(methanylylidene))bis(2,5-bis(octyloxy) benzaldehyde)) were synthesized by ...[more]

PMID: 30823371

Similar Datasets

Project description:Metal corrosion is an important economic problem globally. One of the best ways to protect metal surfaces from corrosion is by the use of corrosion inhibitors, especially surfactants. This study assesses anticorrosion properties of three inhibitor compounds (S1, S2, and S3) of ethoxylate sulfanilamide containing 2, 10, and 20 units of ethylene oxide on carbon steel in 1 M HCl solution. The anticorrosive performance of S1, S2, and S3 was studied using potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), adsorption isotherm, surface tests (scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, and X-ray diffraction (XRD) analysis), and computational studies (density functional theory (DFT) and molecular dynamics (MD) simulations) within the concentration range of 10-6 to 10-2 M at 30 ± 2 °C. The results of the methods used indicate that increasing the concentration of the inhibitor compounds improves the effectiveness of inhibition (from 50.9 to 98%), whereas the inhibition efficiency order for ethoxylated sulfanilamide compounds is S2 > S3 > S1 with the highest inhibiting efficiency, respectively, of 98.0, 95.0, and 90.0% for 10-2 M. Also, PDP indicated that S1, S2, and S3 inhibitors act as mixed-type inhibitors and their adsorption obeys the Langmuir adsorption isotherm model. Surface tests show that the studied compounds can significantly inhibit acid attack via chemical adsorption on the metal. Furthermore, all of the chemical descriptors derived from DFT indicate that the three inhibitors are quite well adsorbed by the adhesion centers on the CS surface. The three compounds' molecular geometries and electronic structures were calculated using quantum chemical calculations. Using theoretical computations, the energy difference between the highest occupied molecular orbital and the lowest occupied molecular orbital has been determined to represent chemical reactivity and kinetic stability of a composition.

Project description:The aim of our study was to quantitatively evaluate the optical properties of photochromic lenses available on the market under cold and warm temperatures corresponding to the winter and summer seasons. The transmittance of 12 photochromic lenses from five manufacturers was measured using an UV/VIS spectrophotometer at cold (6 ± 2°C) and at warm (21 ± 2°C) temperatures. Transmittances were recorded from 380 to 780 nm and at the wavelength with maximum absorbance, which was calculated from the transmittance. The characteristics of the lenses were evaluated by examining changes in the optical properties at colorless and colored states and in the fading rate depending on temperature. The wavelength with maximum absorbance for photochromic lenses at the cold temperature showed a shorter shift than that at the warm temperature. The photochromic properties at the cold temperature were 11.5% lower for transmittance, 1.4 times higher for the change in optical density, and 1.2 times higher for the change in transmittance in the colored and colorless states, optical blocking % ratio, and change in luminous transmittance as compared to those at the warm temperature in the colored state. The fading rates based on the half-life time at the cold temperature were from 2.7 to 5.4 times lower than those at the warm temperature. The fading time until 80% transmittance was 6.4 times longer at the cold as compared to that at the warm temperature. There were significant differences in the optical properties of the photochromic lenses in terms of an absorbance at a shorter wavelength, a lower transmittance, a higher optical density, optical blocking % ratio, and luminous transmittance at the cold as compared to the warm temperature. Hence, it is necessary to provide consumers with information on photochromic optical properties, including the transmittance in colored and colorless states, and the fading rates at temperatures corresponding to the summer and winter seasons for each product.

Dataset Information

Mechanosynthesis of Photochromic Oligophenyleneimines: Optical, Electrochemical and Theoretical Studies.

Publications

Mechanosynthesis of Photochromic Oligophenyleneimines: Optical, Electrochemical and Theoretical Studies.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets