Dataset Information

Physical immobilization of particles inspired by pollination.

ABSTRACT: Biomimetic systems often exhibit striking designs well adapted to specific functions that have been inspiring the development of new technologies. Herein, we explored the remarkable ability of honey bees to catch and release large quantities of pollen grains. Hair spacing and height on bees are crucial for their ability to mechanically fix pollen grains. Inspired by this, we proposed the concept of a micropatterned surface for microparticle entrapment, featuring high-aspect-ratio elastic micropillars spaced to mimic the hairy surface of bees. The hypothesis was validated by investigating the ability of polydimethylsiloxane microfabricated patches to fix microparticles. The geometrical arrangement, spacing, height, and flexibility of the fabricated micropillars, and the diameter of the microparticles, were investigated. Higher entrapment capability was found through the match between particle size and pillar spacing, being consistent with the observations that the diameter of pollen grains is similar to the spacing between hairs on bees' legs. Taller pillars permitted immobilization of higher quantities of particles, consistent with the high aspect ratio of bees' hairs. Our biomimetic surfaces were explored for their ability to fix solid microparticles for drug-release applications, using tetracycline hydrochloride as a model antibiotic. These surfaces allowed fixation of more than 20 mg/cm2 of antibiotic, about five times higher dose than commercialized patches (5.1 mg/cm2). Such bioinspired hairy surfaces could find applications in a variety of fields where dry fixation of high quantities of micrometer-sized objects are needed, including biomedicine, agriculture, biotechnology/chemical industry, and cleaning utensils.

SUBMITTER: Santos LF

PROVIDER: S-EPMC6431214 | biostudies-literature | 2019 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Physical immobilization of particles inspired by pollination.

Santos Lúcia F LF Silva A Sofia AS Correia Clara R CR Mano João F JF

Proceedings of the National Academy of Sciences of the United States of America 20190304 12

Biomimetic systems often exhibit striking designs well adapted to specific functions that have been inspiring the development of new technologies. Herein, we explored the remarkable ability of honey bees to catch and release large quantities of pollen grains. Hair spacing and height on bees are crucial for their ability to mechanically fix pollen grains. Inspired by this, we proposed the concept of a micropatterned surface for microparticle entrapment, featuring high-aspect-ratio elastic micropi ...[more]

PMID: 30833393

Similar Datasets

Project description:Immobilizing particles on beads, fibers, or filaments, when only one side is exposed to the reaction medium and therefore can be selectively functionalized, is a scalable and easy to control strategy for the fabrication of amphiphilic Janus particles. Here we describe a new, robust method for the fabrication of amphiphilic Janus particles based on immobilization of polymethylsilsesquioxane (PMSQ) particles on polycarbonate (PC), a high impact-resistance polymer with superior mechanical properties. The immobilization of the particles on the PC microspores is performed via inverse solvent displacement method. PMSQ particles are added to a PC solution in tetrahydrofuran (THF), a good solvent for PC. The solution is then precipitated by the introduction of aqueous surfactant solution (antisolvent for PC) under an ultrasonic field. It is important to note that THF and water are miscible and do not form emulsion. During precipitation, PMSQ particles are assembled onto the surface of the PC spherical precipitates/microspheres. The exposed hemispheres of the PMSQ particles are then selectively silanized by (3-Aminopropyl)triethoxysilane (APTES) to introduce amine groups on their surface. To increase the polarity of the functionalized hemispheres, the amine groups are further modified to introduce carboxyl groups. SEM characterization confirms the fine embedment of PMSQ particles onto the PC microspheres. Covalent attachment of silica nanoparticles (NPs) to the functionalized hemispheres of the resulting particles along with fluorescent confocal microscopy conclusively prove the successful fabrication of amphiphilic Janus particles. The immobilization of particles onto highly rigid polymeric microspheres such as PC may pave the way for the development of a robust fabrication procedure with high resistance to temperature fluctuations and harsh mixing conditions that can arise during preparation. This method can be implemented toward a large variety of other synthetic commercial polymers such as polyamide, polyether sulfones, Polyether, ether ketone, or similar.

Project description:BackgroundTo investigate the influence of shoulder immobilization on daily physical activity.IntroductionThe harmful effect of sedentary behavior does not receive much attention in orthopedic surgery even though immobilization, especially of the lower extremity, has been associated with reduced physical activity. Immobilization of the shoulder is common after reconstructive shoulder surgery and could also potentially lead to reduced physical activity and have a negative effect on a patient's general health.MethodTwenty-one healthy volunteers were immobilized in an orthosis (DJO Ultrasling III) for 10 h on two consecutive days. In the following week, activity was measured on the same days without the orthosis. Activity including gait cycles per minute and total gait cycles per day was measured by accelerometer based step count StepWatchTMActivity Monitor. Average age was 26 +/- 3 years. A questionnaire was administered to evaluate subjective activity.ResultsParticipants wearing the shoulder orthosis were significantly less active than without immobilization by 2227.5 gait cycles/day (5501.2 with SO, 7728.7 without SO). Also, significantly more time in sedentary behavior occurred (< 400 steps/h) when the shoulder was immobilized. Patients were significantly more active without shoulder orthosis in medium level activities (800-999 steps/h). Differences for low (400-799 steps/h) and high activity levels (> 1000 steps/h) were not statistically significant. Subjective limitations while wearing the orthosis were graded at 2.343 on a scale of 0-4.ConclusionResults of this study show that even in young, healthy volunteers immobilization of the shoulder in an orthosis for 2 days leads to significantly reduced activity levels. A negative influence on general health, especially in older patients who are immobilized for up to 6 weeks, can potentially occur. Promoting physical activity during the immobilization period should be part of rehabilitation after injuries/surgery of the shoulder.Trial registrationRetrospectively registered in DRKS (DRKS00017636).

Dataset Information

Physical immobilization of particles inspired by pollination.

Publications

Physical immobilization of particles inspired by pollination.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets