Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced photoreduction CO2 efficiency by criss-crossed TiO2 nanoflakes combined with CdS under visible light.

ABSTRACT: In this paper, a novel photocatalyst CNCC with excellent visible light photocatalytic performance was successfully prepared to optimize the CO2 photoreduction performance. The results showed that the methanol formation rate of CNCC was 24.7 µmol g-1 h-1, which was 1.42 times higher than that of NCC. The enhanced photoactivity is attributed to the rapid propagation of charge carriers induced by light from the constructed composite structure.

SUBMITTER: Wang F

PROVIDER: S-EPMC6458405 | biostudies-literature | 2019 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Enhanced photoreduction CO2 efficiency by criss-crossed TiO2 nanoflakes combined with CdS under visible light.

Wang Fei F Wang Juangang J Cheng Yunhuan Y

Royal Society open science 20190313 3

In this paper, a novel photocatalyst CNCC with excellent visible light photocatalytic performance was successfully prepared to optimize the CO2 photoreduction performance. The results showed that the methanol formation rate of CNCC was 24.7 µmol g-1 h-1, which was 1.42 times higher than that of NCC. The enhanced photoactivity is attributed to the rapid propagation of charge carriers induced by light from the constructed composite structure. ...[more]

PMID: 31032034

Similar Datasets

Mesoporous TiO2 Monoliths Impregnated with CdS and CuO Nanoparticles for Airborne Bacteria Inactivation Under Visible Light.

Project description:In this work, macroscopic TiO2 monoliths are proposed to serve simultaneously as support and co-catalyst in a continuous flow photoreactor. The impregnation via one-pot of mesoporous TiO2 with CdS (m-TiO2/CdS) and CuO (m-TiO2/CuO) nanoparticles enabled the formation of photocatalytic heterojunctions retaining high specific surface area (~ 100 m2/g). The impregnated monoliths of 2-3 mm in size were employed as photocatalysts to inactivate airborne bacteria under blue light, reducing the emission of living airborne bacteria up to 0.1% and 37.7% when using m-TiO2/CdS and m-TiO2/CuO, respectively. Bacteria were characterized and quantified by flow cytometry and cell lysis was confirmed by SEM, detecting collapsed bacteria. Along 96 h of continuous photocatalysis at a flow rate of 2.2 L/min, the cell concentration presented maxima and minima due to the adsorption-desorption stages of bioaerosols over the catalysts, in concordance with thermal gravimetric analysis. The reactivation of catalysts was achieved by calcination at 400 °C, however, after a third re-cycle, the photocatalytic activity for all monoliths was practically negligible because the physicochemical surface changes hinder the adequate bioaerosol adsorption. These porous systems could emerge as promising gas-phase catalysts since the mass transport is facilitated by porosity and the release of catalyst nanoparticles is avoided by the active support, providing a safe and viable model for bioaerosols inactivation to improve indoor air quality with the use of interior lighting.Supplementary informationThe online version contains supplementary material available at 10.1007/s10562-021-03659-9.

| S-EPMC8141277 | biostudies-literature

Enhanced visible light photocatalytic performance of CdS sensitized TiO2 nanorod arrays decorated with Au nanoparticles as electron sinks.

Project description:In this paper, we propose a nanostructure with Au nanoparticles (NPs), as electron sinks, located at the most outside layer of CdS sensitized TiO2 nanorod arrays (TiO2 NRAs/CdS/Au). By the introduction of Au NPs, TiO2 NRAs/CdS/Au performs higher visible light photocatalytic capacity in the degradation of unsymmetrical dimethylhydrazine wastewater than TiO2 NRAs/CdS. The optimal deposition time for Au NPs is 30 s. The visible light induced degradation ability of TiO2 NRAs/CdS/Au (30 s) is 1.4 times that of TiO2 NRAs/CdS. The cycling stability of TiO2 NRAs/CdS is greatly enchanced after Au NPs decoration, which can maintain 95.86% after three cycles. Photoluminescence spectra and photoelectrochemical measurements were carried out to reveal the underlying mechanism for the improved visible light photocatalytic capacity of TiO2 NRAs/CdS/Au. This work demonstrates a promising way for the rational design of metal-semiconductor photocatalysts used in decomposition reaction that can achieve high photocatalytic efficiency.

| S-EPMC5430509 | biostudies-literature

Efficient and clean photoreduction of CO(2) to CO by enzyme-modified TiO(2) nanoparticles using visible light.

Project description:A hybrid enzyme-nanoparticle system is described for achieving clean reduction of CO(2) to CO using visible light as the energy source. An aqueous dispersion of TiO(2) nanoparticles modified by attachment of carbon monoxide dehydrogenase (CODH) and a Ru photosensitizer produces CO at a rate of 250 mumol of CO (g of TiO(2))(-1) h(-1) when illuminated with visible light at pH 6 and 20 degrees C.

| S-EPMC2845288 | biostudies-literature

Mechano-synthesized orange TiO2 shows significant photocatalysis under visible light.

Project description:Nitrogen and carbon co-doped TiO2 particles with a brilliant yellow-orange color were produced mechanochemically by high-energy ball milling as one-pot synthesis. This facile synthesis required only grinding TiO2 with melamine at room temperature. Using monochoromatic lights with the same intensity in visible and UV, the photocatalytic activity of the TiO2 particles was accurately evaluated with respect to the degradation of an aqueous dye (methylene blue) solution. The activities under visible light (450 and 500?nm) were, respectively, 4 and 2 times higher than that of the unmilled TiO2 under UV light (377?nm), corresponding to 9 and 5 times higher than the UV under the solar light condition. The properties and structure of the co-doped TiO2 particles before and after milling were analyzed using eight experimental methods. As a result, it was found that the nitrogen replaced as an oxygen site in milled TiO2 has the highest concertation (2.3%) in the past studies and the structure of milled TiO2 is composed of a polymorphism of four different solid phases of TiO2, gives significant higher photocatalytic activity at visible light than that of UV light. A good repeatability of the photocatalyst was investigated by the number of cycles for the decomposition reaction of the aquesous dye solution.

| S-EPMC6195626 | biostudies-literature

Visible light responsive TiO2 photocatalysts for degradation of indoor acetaldehyde.

Project description:Photocatalysis is a promising technique for developing sustainable and environmentally friendly materials to improve indoor air quality. Visible-light-responsive TiO2 has been widely investigated but there are inconsistent results because photocatalytic properties depend strongly on synthetic methods. Herein, we synthesize TiO2 doped with 10 different metal ions (M-TiO2) by conducting a dialysis in a sol-gel method to obtain the best photocatalyst for the degradation of acetaldehyde under LED irradiation. Purification of a sol by dialysis enables us to discuss pure effects of dopants on the photocatalytic activity because impurities such as counter ions of metal salts are removed before sintering. Only Cr-, Pt-, V-, and Fe-TiO2 show photocatalytic activity and the optimal doping amounts are 0.50-1.7, 0.10, 1.0, and 0.10 atom%, respectively. Such differences in the optimal amounts can be explained in terms of the dopant ions having different valence states, suggesting the formation of oxygen vacancies. The Cr-TiO2 powder exhibits high activity even at the doping amount of 4.2 atom%. We also demonstrate that the Cr-TiO2 film prepared on a glass substrate can be used to degrade acetaldehyde by changing the film thickness and the LED intensity depending on the degree of the indoor contamination.

| S-EPMC9057793 | biostudies-literature

Enhanced photocatalytic activity of Se-doped TiO2 under visible light irradiation.

Project description:Anatase TiO2 is a typical photocatalyst, and its excellent performance is limited in ultraviolet light range due to its wide band gap of 3.2?eV. A series of Se-doped TiO2 nanoparticles in anatase structure with various Se concentrations up to 17.1?at.% were prepared using sol-gel method. The doped Se ions are confirmed to be mainly in the valence state of?+?4, which provides extra electronic states in the band gap of TiO2. The band gap is effectively narrowed with the smallest gap energy of 2.17?eV, and the photocatalytic activity is effectively improved due to the extended absorption range. The photocatalytic activity was evaluated by the degradation of Rhodamine B (RhB) in aqueous solution under visible light irradiation. The results show that Se doping significantly improves the photocatalytic activity of TiO2 and 13.63?at.% Se-doped TiO2 has the best performance.

| S-EPMC5993730 | biostudies-literature

Pyropheophorbide-a/(001) TiO2 Nanocomposites with Enhanced Charge Separation and O2 Adsorption for High-Efficiency Visible-Light Degradation of Ametryn.

Project description:It is highly desired to enhance charge separation and O2 adsorption of the pyropheophorbide-a (Ppa) to promote visible-light activity and stability. Herein, Ppa modified 001-facet-exposed TiO2 nanosheets (Ppa/001T) nanocomposites with different weight ratios were fabricated via the self-assembly approach by OH induced. Compared with the bare Ppa, the 8% amount optimized 8Ppa/001T sample displayed 41-fold enhanced activity for degradation of Ametryn (AME) under visible-light irradiation. The promoted photoactivities could be attributed to the accelerated charge carrier's separation by coupling TiO2 as thermodynamic platform for accepting the photoelectrons with high energy from Ppa and the promoted O2 adsorption because of the residual fluoride on TiO2. As for this, a distinctive two radicals (•O2- and •OH) involved pathway of AME degradation is carried out, which is different from the radical pathway dominated by •O2- for the bare Ppa. This work is of utmost importance since it gives us detailed information regarding the charge carrier's separation and the impact of the radical pathway that will pave a new approach toward the design of high activity visible-light driven photocatalysts.

| S-EPMC9458040 | biostudies-literature

Efficient visible-light photocatalytic H2 evolution with heterostructured Ag2S modified CdS nanowires.

Project description:The low separation efficiency of photogenerated charges and severe photocorrosion seriously impeded the application of CdS in photocatalytic water splitting. Here we report new routes to improve the photocatalytic performance of CdS nanowires (NWs) by decorating with Ag2S nanoparticles, so Ag2S/CdS heterojunction is constructed. The Ag2S/CdS heterojunction exhibited optimal photocatalytic H2 evolution rate of 777.3 μmol h-1 g-1, which is 12.1 times higher than that of pure CdS. The intrinsic characteristics of Ag2S/CdS nanocomposites, such as structure, optical properties, and surface chemical state are systematically studied by experimental characterizations and theoretical calculations. The comprehensive analysis demonstrates that the heterojunction between Ag2S and CdS accelerates photoinduced electrons transfer from CdS to Ag2S, enhancing their ability for water splitting. Meanwhile, the holes on the valence band of CdS react with the sacrificial agents, thus leading to the efficient separation of photogenerated electron-hole pairs. This work offers a simple route to synthesize one-dimensional CdS-based nanocomposites for efficient energy conversion driven by visible light.

| S-EPMC9038043 | biostudies-literature

Hypercrosslinked Polymers as a Photocatalytic Platform for Visible-Light-Driven CO2 Photoreduction Using H2 O.

Project description:The design of robust, high-performance photocatalysts is key for the success of solar fuel production by CO2 conversion. In this study, hypercrosslinked polymer (HCP) photocatalysts have been developed for the selective reduction of CO2 to CO, combining excellent CO2 sorption capacities, good general stabilities, and low production costs. HCPs are active photocatalysts in the visible light range, significantly outperforming the benchmark material, TiO2 P25, using only sacrificial H2 O. It is hypothesized that superior H2 O adsorption capacities facilitate access to photoactive sites, improving photocatalytic conversion rates when compared to sacrificial H2 . These polymers are an intriguing set of organic photocatalysts, displaying no long-range order or extended π-conjugation. The as-synthesized networks are the sole photocatalytic component, requiring no added cocatalyst doping or photosensitizer, representing a highly versatile and exciting platform for solar-energy conversion.

| S-EPMC8048809 | biostudies-literature

Nanostructured TiO2 anatase-rutile-carbon solid coating with visible light antimicrobial activity.

Project description:TiO2 photocatalyst is of interest for antimicrobial coatings on hospital touch-surfaces. Recent research has focused on visible spectrum enhancement of photocatalytic activity. Here, we report TiO2 with a high degree of nanostructure, deposited on stainless steel as a solid layer more than 10 μm thick by pulsed-pressure-MOCVD. The TiO2 coating exhibits a rarely-reported microstructure comprising anatase and rutile in a composite with amorphous carbon. Columnar anatase single crystals are segmented into 15-20 nm thick plates, resulting in a mille-feuilles nanostructure. Polycrystalline rutile columns exhibit dendrite generation resembling pine tree strobili. We propose that high growth rate and co-deposition of carbon contribute to formation of the unique nanostructures. High vapor flux produces step-edge instabilities in the TiO2, and solid carbon preferentially co-deposits on certain high energy facets. The equivalent effective surface area of the nanostructured coating is estimated to be 100 times higher than standard TiO2 coatings and powders. The coatings prepared on stainless steel showed greater than 3-log reduction in viable E coli after 4 hours visible light exposure. The pp-MOCVD approach could represent an up-scalable manufacturing route for supported catalysts of functional nanostructured materials without having to make nanoparticles.

| S-EPMC6374394 | biostudies-literature