Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Design of Aerogels, Cryogels and Xerogels of Alginate: Effect of Molecular Weight, Gelation Conditions and Drying Method on Particles' Micromeritics.

ABSTRACT: Processing and shaping of dried gels are of interest in several fields like alginate aerogel beads used as highly porous and nanostructured particles in biomedical applications. The physicochemical properties of the alginate source, the solvent used in the gelation solution and the gel drying method are key parameters influencing the characteristics of the resulting dried gels. In this work, dried gel beads in the form of xerogels, cryogels or aerogels were prepared from alginates of different molecular weights (120 and 180 kDa) and concentrations (1.25, 1.50, 2.0 and 2.25% (w/v)) using different gelation conditions (aqueous and ethanolic CaCl₂ solutions) and drying methods (supercritical drying, freeze-drying and oven drying) to obtain particles with a broad range of physicochemical and textural properties. The stability of physicochemical properties of alginate aerogels under storage conditions of 25 °C and 65% relative humidity (ICH-climatic zone II) during 1 and 3 months was studied. Results showed significant effects of the studied processing parameters on the resulting alginate dried gel properties. Stability studies showed small variations in aerogels weight and specific surface area after 3 months of storage, especially, in the case of aerogels produced with medium molecular weight alginate.

SUBMITTER: Rodriguez-Dorado R

PROVIDER: S-EPMC6471992 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

How alginate properties influence in situ internal gelation in crosslinked alginate microcapsules (CLAMs) formed by spray drying.

Project description:Alginates gel rapidly under ambient conditions and have widely documented potential to form protective matrices for sensitive bioactive cargo. Most commonly, alginate gelation occurs via calcium mediated electrostatic crosslinks between the linear polyuronic acid polymers. A recent breakthrough to form crosslinked alginate microcapsules (CLAMs) by in situ gelation during spray drying ("CLAMs process") has demonstrated applications in protection and controlled delivery of bioactives in food, cosmetics, and agriculture. The extent of crosslinking of alginates in CLAMs impacts the effectiveness of its barrier properties. For example, higher crosslinking extents can improve oxidative stability and limit diffusion of the encapsulated cargo. Crosslinking in CLAMs can be controlled by varying the calcium to alginate ratio; however, the choice of alginates used in the process also influences the ultimate extent of crosslinking. To understand how to select alginates to target crosslinking in CLAMs, we examined the roles of alginate molecular properties. A surprise finding was the formation of alginic acid gelling in the CLAMs that is a consequence of simultaneous and rapid pH reduction and moisture removal that occurs during spray drying. Thus, spray dried CLAMs gelation is due to calcium crosslinking and alginic acid formation, and unlike external gelation methods, is insensitive to the molecular composition of the alginates. The 'extent of gelation' of spray dried CLAMs is influenced by the molecular weights of the alginates at saturating calcium concentrations. Alginate viscosity correlates with molecular weight; thus, viscosity is a convenient criterion for selecting commercial alginates to target gelation extent in CLAMs.

| S-EPMC7906420 | biostudies-literature

Environmental Remediation with Functional Aerogels and Xerogels.

Project description:Several different types of aerogels and xerogels are demonstrated as effective sorbents for the capture and/or immobilization of radionuclides and other contaminants in gaseous form [e.g., Hg(g), I2(g), Xe, Kr] as well as ionic form (e.g., Cd2+, Ce4+, Cs+, Cu2+, Fe2+, Hg2+, I-, IO3 -, Kr, Pb2+, Rb+, Sr2+, 99Tc7+, U6+, Zn2+). These sorbents have unique properties, which include high specific surface areas, high pore volumes, a range of pore sizes, and functionalities that provide methods for binding radionuclides and other contaminants, generally through physisorption, chemisorption, or a combination thereof. This combination of properties and functionalities makes these types of materials ideal for use as sorbents for capturing radionuclides. The primary base materials that will be discussed in this paper include Ag0-functionalized silica aerogels, Ag+-impregnated aluminosilicate aerogels, Ag0-functionalized aluminosilicate aerogels, metal-impregnated (non-Ag) aluminosilicate aerogels and xerogels, sulfide-based aerogels, and carbon-based aerogel composites. For the capture of I2(g), the materials reported herein show some of the highest iodine loadings ever reported for inorganic sorbents. For the capture of ionic species, these materials also show promise as next-generation materials for active radionuclide remediation. This progress report describes materials fabrication, general properties, and environmental remediation applications.

| S-EPMC7533867 | biostudies-literature

Influence of Cross-Linking Conditions on Drying Kinetics of Alginate Hydrogel.

Project description:Hydrogels are three-dimensional cross-linked polymeric networks capable of a large amount of fluid retention in their structure. Hydrogel outputs manufactured using additive manufacturing technologies are exposed to water loss, which may change their original shape and dimensions. Therefore, the possibility of retaining water is important in such a structure. In this manuscript, kinetic analysis of water evaporation from sodium alginate-based hydrogels exposed to different environmental conditions such as different temperatures (7 and 23 °C) and ambient humidity (45, 50 and 95%) has been carried out. The influence of the cross-linking method (different calcium chloride concentration-0.05, 0.1 and 0.5 M) of sodium alginate and cross-linking time on the water loss was also considered. Studies have shown that a decrease in the temperature and increase in the storage humidity can have a positive effect on the water retention in the structure. The storage conditions that led to the least weight and volume loss were T 7 °C and 95% humidity. These experiments may help in selecting the appropriate hydrogel preparation method for future applications, as well as their storage conditions for minimum water loss and, consequently, the least change in dimensions and shape.

| S-EPMC9858758 | biostudies-literature

Injectable, Tough Alginate Cryogels as Cancer Vaccines.

Project description:A covalently crosslinked methacrylated (MA)-alginate cryogel vaccine has been previously shown to generate a potent response against murine melanoma, but is not mechanically robust and requires a large 16G needle for delivery. Here, covalent and ionic crosslinking of cryogels are combined with the hypothesis that this will result in a tough MA-alginate cryogel with improved injectability. All tough cryogels can be injected through a smaller, 18G needle without sustaining any damage, while covalently crosslinked-only cryogels break after injection. Cytosine-phosphodiester-guanine (CpG)-delivering tough cryogels effectively activate dendritic cells (DCs). Granulocyte macrophage colony-stimulating factor releasing tough cryogels recruit four times more DCs than blank gels by day 7 in vivo. The tough cryogel vaccine induces strong antigen-specific cytotoxic T-lymphocyte and humoral responses. These vaccines prevent tumor formation in 80% of mice inoculated with HER2/neu-overexpressing DD breast cancer cells. The MA-alginate tough cryogels provide a promising minimally invasive delivery platform for cancer vaccinations.

| S-EPMC6467206 | biostudies-literature

Starch-Based Aerogels Obtained via Solvent-Induced Gelation.

Project description:In this work, the ability of several solvents to induce gel formation from amylomaize starch solubilized in dimethyl sulfoxide (DMSO) was investigated. The formed gels were subjected to solvent exchange using ethanol and dried with supercritical carbon dioxide (sc-CO2) to obtain the aerogels. The influence of starch concentration (3-15 wt%) and solvent content (20-80 wt%) on gel formation was also studied. It was demonstrated that the gelation of starch in binary mixtures of solvents can be rationalized by Hansen Solubility Parameters (HSP) revealing a crucial hole of hydrogen bonding for the gel's strength, which is in agreement with rheological measurements. Only the addition of water or propylene glycol to starch/DMSO solutions resulted in strong gels at a minimum starch and solvent content of 7.5 wt% and 50 wt%, respectively. The resulting aerogels showed comparably high specific surface areas (78-144 m2 g-1) and low envelope densities (0.097-0.203 g cm-3). The results of this work indicate that the HSP parameters could be used as a tool to guide the rational selection of water-free gelation in starch/DMSO systems. In addition, it opens up an attractive opportunity to perform starch gelation in those solvents that are miscible with sc-CO2, avoiding the time-consuming step of solvent exchange.

| S-EPMC7559039 | biostudies-literature

Amine Modification of Silica Aerogels/Xerogels for Removal of Relevant Environmental Pollutants.

Project description:Serious environmental and health problems arise from the everyday release of industrial wastewater effluents. A wide range of pollutants, such as volatile organic compounds, heavy metals or textile dyes, may be efficiently removed by silica materials advanced solutions such as aerogels. This option is related to their exceptional characteristics that favors the adsorption of different contaminants. The aerogels performance can be selectively tuned by an appropriate chemical or physical modification of the aerogel's surface. Therefore, the introduction of amine groups enhances the affinity between different organic and inorganic contaminants and the silica aerogels. In this work, different case studies are reported to investigate and better understand the role of these functional groups in the adsorption process, since the properties of the synthesized aerogels were significantly affected, regarding their microstructure and surface area. In general, an improvement of the removal efficiency after functionalization of aerogels with amine groups was found, with removal efficiencies higher than 90% for lead and Rubi Levafix CA. To explain the adsorption mechanism, both Langmuir and Freundlich models were applied; chemisorption is most likely the sorption type taking place in the studied cases.

| S-EPMC6833102 | biostudies-literature

Understanding the metal free alginate gelation process.

Project description:Alginate is a natural polysaccharide that has been recently gaining increasing attention as a biomaterial in the field of tissue engineering due to its favourable biocompatibility and gelation properties. Alginate hydrogels are commonly made by ionic crosslinking in the presence of divalent cations. Only a few studies have attempted to prepare alginate hydrogels without the presence of metal cations. Here the formation of metal free alginate hydrogels in the presence of the amino-acid glutamine is investigated. The transition from sol to gel is monitored by rheological measurements in the viscoelastic regime that reveal how the charged or neutral form of glutamine induces deep differences in the gelling ability. In particular, we show that the storage, G', and loss, G'', moduli differ significantly by shifting the glutamine zwitterionic equilibrium. Protonated amino acid could induce a shielding effect of the electrostatic repulsion of the alginate chains. Stable gels are obtained in the presence of a larger amount of free organic acid that gives rise to chain crosslink junctions and chain-chain stabilization. This opens up the possibility of preparing metal-free alginate hydrogels based on amino acid equilibria being pH sensitive.

| S-EPMC9042680 | biostudies-literature

Ambient Pressure Hybrid Silica Monoliths with Hexamethyldisilazane: From Vitreous Hydrophilic Xerogels to Superhydrophobic Aerogels.

Project description:Hybrid silica-based monoliths were synthesized at ambient pressure, using minimum amounts of the silylating agent hexamethyldisilazane (HMDZ). Depending on the synthesis approach, the materials ranged from dense and vitreous xerogels to transparent and superhydrophobic aerogels. Emphasis was given to understanding the role of the silylating agent, its content and incorporation process on the final morphology, and properties of the xerogels/aerogels. It is proven that as a coprecursor, increasing HMDZ content contributes to increase the lipophilic/hydrophilic balance, induce high surface areas, and decrease densities, but there is a maximum usable content for producing monoliths. Conversely, as a postsynthesis modifier, there is an optimum HMDZ content that maximizes hydrophobicity (water contact angle of ∼144°) and induces high surface area (∼700 m2·g-1), keeping the density low (∼300 kg·m-3). It is proven that the aging period in the hydrophobizing solution is a crucial parameter. The most superhydrophobic xerogels were obtained using HMDZ as a postsynthesis modifier, achieving values of water contact angles as high as ∼173°, at the cost of density increase to ∼600 kg·m-3 and decrease of the surface area to ∼300 m2·g-1. The best compromise between low density, high surface area, and superhydrophobicity is obtained using HMDZ both as a coprecursor and as a postsynthesis modifier, in a low HMDZ/tetraethoxysilane total molar ratio (<0.2), with an aging period of 16-24 h. The use of subcritical drying, along with the minimization of the expensive organic modifier quantities, allows envisaging a safe and low-cost large-scale production of a variety of materials, including superhydrophobic aerogels with potential distinctive applications.

| S-EPMC6641688 | biostudies-literature

Curcumin-loaded metal oxide aerogels: supercritical drying and stability.

Project description:Curcumin, known as a potential antioxidant and anti-inflammatory agent, has major limitations for its therapeutic use because of its lack of water solubility and relatively low bioavailability. We report for the first time the loading of different metal oxide aerogels with curcumin. The aerogels were prepared via the sol-gel process and dried under supercritical conditions. Mixing curcumin with the metal precursors prior to the formation of the solid network ensures maximum entrapment. The curcumin-network interactions stabilize the organic moiety and create hybrid aerogels as potential vehicles for curcumin in various media. The aerogels were characterized by FTIR spectroscopy, thermogravimetric analysis, electron microscopy, and fluorescence spectroscopy to confirm their hybrid nature. The stability study by fluorescence spectroscopy revealed three distinct behaviors depending on the nature of the metal oxide: (i) a minor interaction between curcumin and the solid network slightly affecting the microenvironment; (ii) a quenching phenomenon when iron is present explained by a coordination between the iron ions and curcumin; and (iii) a strong complexation of the metal ions with curcumin after gelation.

| S-EPMC9042724 | biostudies-literature

Evaluation of Polyurea-Crosslinked Alginate Aerogels for Seawater Decontamination.

Project description:Polyurea-crosslinked Ca-alginate (X-Ca-alginate) aerogel beads (diameter: 3.3 mm) were evaluated as adsorbents of metal ions, organic solvents, and oils. They were prepared via reaction of an aromatic triisocyanate (Desmodur RE) with pre-formed Ca-alginate wet gels and consisted of 54% polyurea and 2% calcium. X-Ca-alginate aerogels are hydrophobic nanoporous materials (90% v/v porosity), with a high BET surface area (459 m2/g-1), and adsorb PbII not only from ultrapure water (29 mg/g-1) but also from seawater (13 mg/g-1) with high selectivity. The adsorption mechanism involves replacement of CaII by PbII ions coordinated to the carboxylate groups of the alginate backbone. After treatment with a Na2EDTA solution, the beads can be reused, without significant loss of activity for at least two times. X-Ca-alginate aerogels can also uptake organic solvents and oil from seawater; the volume of the adsorbate can be as high as the total pore volume of the aerogel (6.0 mL/g-1), and the absorption is complete within seconds. X-Ca alginate aerogels are suitable for the decontamination of aquatic environments from a broader range of inorganic and organic pollutants.

| S-EPMC8005931 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data