Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis and Characterization of Acetic Acid-Doped Polyaniline and Polyaniline?Chitosan Composite.

ABSTRACT: Polyaniline-chitosan (PAni-Cs) composite films were synthesized using a solution casting method with varying PAni concentrations. Polyaniline powders used in the composite synthesis were polymerized using acetic acid as the dopant media. Raman spectroscopy revealed that the PAni powders synthesized using hydrochloric acid and acetic acid did not exhibit significant difference to the chemical features of PAni, implying that PAni was formed in varying concentrations of the dopant media. The presence of agglomerated particles on the surface of the Cs composite, which may have been due to the presence of PAni powders, was observed with scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDX). Ultraviolet-visible (UV-Vis) spectroscopy further showed the interaction of PAni with Cs where the Cs characteristic peak shifted to a higher wavelength. Cell viability assay also revealed that the synthesized PAni-Cs composites were nontoxic and may be utilized for future biomedical applications.

SUBMITTER: Pasela BR

PROVIDER: S-EPMC6477596 | biostudies-literature | 2019 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Synthesis and characterization of polyaniline-hydrotalcite-graphene oxide composite and application in polyurethane coating.

Project description:In this paper, a composite from polyaniline and graphene oxide-hydrotalcite hybrid (PAN-HG) was fabricated by direct polymerization of aniline using ammonium persulphate as an oxidant in the presence of a HG hybrid. The structure and morphological properties of synthesized PAN-HG composites were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Raman spectra, and scanning electron microscopy (SEM) techniques. The electrochemical properties of the composite particles were also analyzed by potentiodynamic polarization curves to evaluate the corrosion inhabitation. The results were calculated by Tafel fitting and showed that the effective corrosion protection values were 73.11%, 88.46%, and 95.49%, corresponding to HG, 1PAN-HG, and 2PAN-HG. The influence of PAN-HG on the corrosion protection of the polyurethane coating applied on the CT3 steel was investigated. As a result, the PU containing 0.5% of 2PAN-HG showed the most effective protection of the CT3 steel substrate. The R C of the coating was about 1.61 × 107 Ω cm2, and after immersion for 30 days, the R C value was 0.17 × 106 Ω cm2. From all the analyzed results, PAN-HG has enhanced the corrosion protection and a complicated protection mechanism was also concluded and explained.

| S-EPMC9041546 | biostudies-literature

Investigation of Acetone Vapour Sensing Properties of a Ternary Composite of Doped Polyaniline, Reduced Graphene Oxide and Chitosan Using Surface Plasmon Resonance Biosensor.

Project description:This work reports the use of a ternary composite that integrates p-Toluene sulfonic acid doped polyaniline (PANI), chitosan, and reduced graphene oxide (RGO) as the active sensing layer of a surface plasmon resonance (SPR) sensor. The SPR sensor is intended for application in the non-invasive monitoring and screening of diabetes through the detection of low concentrations of acetone vapour of less than or equal to 5 ppm, which falls within the range of breath acetone concentration in diabetic patients. The ternary composite film was spin-coated on a 50-nm-thick gold layer at 6000 rpm for 30 s. The structure, morphology and chemical composition of the ternary composite samples were characterized by FTIR, UV-VIS, FESEM, EDX, AFM, XPS, and TGA and the response to acetone vapour at different concentrations in the range of 0.5 ppm to 5 ppm was measured at room temperature using SPR technique. The ternary composite-based SPR sensor showed good sensitivity and linearity towards acetone vapour in the range considered. It was determined that the sensor could detect acetone vapour down to 0.88 ppb with a sensitivity of 0.69 degree/ppm with a linearity correlation coefficient of 0.997 in the average SPR angular shift as a function of the acetone vapour concentration in air. The selectivity, repeatability, reversibility, and stability of the sensor were also studied. The acetone response was 87%, 94%, and 99% higher compared to common interfering volatile organic compounds such as propanol, methanol, and ethanol, respectively. The attained lowest detection limit (LOD) of 0.88 ppb confirms the potential for the utilisation of the sensor in the non-invasive monitoring and screening of diabetes.

| S-EPMC7699882 | biostudies-literature

Recyclable synthesis, characterization, and antimicrobial activity of chitosan-based polysaccharide composite materials.

Project description:We have successfully developed a simple and totally recyclable method to synthesize novel, biocompatible, and biodegradable composite materials from cellulose (CEL) and chitosan (CS). In this method, [BMIm(+) Cl(-) ], an ionic liquid (IL), was used as a green solvent to dissolve and synthesize the [CEL+CS] composites. Since, the IL can be removed from the composites by washing them with water, and recovered by distilling the washed solution, the method is totally recyclable. Spectroscopic and imaging techniques including XRD, FTIR, NIR, and SEM were used to monitor the dissolution, to characterize and to confirm that CEL and CS were successfully regenerated. More importantly, we have successfully demonstrated that [CEL+CS] composite is particularly suited for many applications including antimicrobial property. This is because the composites have combined advantages of their components, namely superior chemical and mechanical stability (from CEL) and bactericide (from CS). Results of tensile strength measurements clearly indicate that adding CEL into CS substantially increase its tensile strength. Up to 5× increase in tensile strength can be achieved by adding 80% of CEL into CS. Results of in vitro antibacterial assays confirm that CS retains its antibacterial property in the composite. More importantly, the composites reported here can inhibit growth of wider range of bacteria than other CS-based materials prepared by conventional methods; that is over 24 h period, the composites substantially inhibited growth of bacteria such as MRSA, VRE, S. aureus, E. coli. These are bacteria that are often found to have the highest morbidity and mortality associated with wound infections.

| S-EPMC3638083 | biostudies-literature

Rheological and Viscoelastic Properties of Chitosan Solutions Prepared with Different Chitosan or Acetic Acid Concentrations

Project description:Chitosan (Ch) is a partially crystalline biopolymer, insoluble in pure water but soluble in acid solutions. It has attracted interest from researchers to prepare solutions using different acid types and concentrations. This research aims to study both the effect of chitosan (Ch) or acetic acid (Ac) concentrations, at different temperatures, on rheological and viscoelastic properties of Ch solutions. To study the effect of Ch, solutions were prepared with 0.5–2.5 g Ch/100 g of solution and Ac = 1%, whereas to study the effect of Ac, the solutions were prepared with 2.0 g of Ch/100 g of solution and Ac = 0.2–1.0%. Overall, all analyzed solutions behaved as pseudoplastic fluid. The Ch strongly affected rheological properties, the consistency index (K) increased and the index flow behavior (n) decreased as a function of Ch. The activation energy, defined as the energy required for the molecule of a fluid to move freely, was low for Ch = 0.5%. The effect of Ac was less evident. Both K and n varied according to a positive and negative, respectively, parabolic model as a function of Ac. Moreover, all solutions, irrespective of Ch and Ac, behaved as diluted solutions, with G” > G’. The relaxation exponent (n”) was always higher than 0.5, confirming that these systems behaved as a viscoelastic liquid. This n” increased with Ch, but it was insensitive to Ac, being slightly higher at 45 °C.

| S-EPMC9455163 | biostudies-literature

One-Step Co-Electrodeposition of Copper Nanoparticles-Chitosan Film-Carbon Nanoparticles-Multiwalled Carbon Nanotubes Composite for Electroanalysis of Indole-3-Acetic Acid and Salicylic Acid.

Project description:A sensitive simultaneous electroanalysis of phytohormones indole-3-acetic acid (IAA) and salicylic acid (SA) based on a novel copper nanoparticles-chitosan film-carbon nanoparticles-multiwalled carbon nanotubes (CuNPs-CSF-CNPs-MWCNTs) composite was reported. CNPs were prepared by hydrothermal reaction of chitosan. Then the CuNPs-CSF-CNPs-MWCNTs composite was facilely prepared by one-step co-electrodeposition of CuNPs and CNPs fixed chitosan residues on modified electrode. Scanning electron microscope (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and linear sweep voltammetry (LSV) were used to characterize the properties of the composite. Under optimal conditions, the composite modified electrode had a good linear relationship with IAA in the range of 0.01-50 μM, and a good linear relationship with SA in the range of 4-30 μM. The detection limits were 0.0086 μM and 0.7 μM (S/N = 3), respectively. In addition, the sensor could also be used for the simultaneous detection of IAA and SA in real leaf samples with satisfactory recovery.

| S-EPMC9228024 | biostudies-literature

Synthesis and Supercapacitor Performance of Polyaniline/Nitrogen-Doped Ordered Mesoporous Carbon Composites.

Project description:The electrochemical property of ordered mesoporous carbon (OMC) can be changed significantly due to the incorporating of electron-donating heteroatoms into OMC. Here, we demonstrate the successful fabrication of nitrogen-doped ordered mesoporous carbon (NOMC) materials to be used as carbon substrates for loading polyaniline (PANI) by in situ polymerization. Compared with NOMC, the PANI/NOMC prepared with a different mass ratio of PANI and NOMC exhibits remarkably higher electrochemical specific capacitance. In a typical three-electrode configuration, the hybrid has a specific capacitance about 276.1 F/g at 0.2 A/g with a specific energy density about 38.4 Wh/kg. What is more, the energy density decreases very slowly with power density increasing, which is a different phenomenon from other reports. PANI/NOMC materials exhibit good rate performance and long cycle stability in alkaline electrolyte (~ 80% after 5000 cycles). The fabrication of PANI/NOMC with enhanced electrochemical properties provides a feasible route for promoting its applications in supercapacitors.

| S-EPMC5968012 | biostudies-literature

Synthesis of Cu-doped carbon dot/chitosan film composite as a catalyst for the colorimetric detection of hydrogen peroxide and glucose.

Project description:The use of colloidal nanoparticles suffers from the drawbacks of potential color interference and substrate-induced aggregation. To overcome the limitations, a catalyst was developed by crosslinking Cu-doped carbon dots (Cu-CDs) with chitosan. Cu-CDs with high peroxidase activity were prepared by using a rapid microwave-assisted method. The Cu-CDs containing 6.88% of Cu had an average particle size of 2.25 nm and exhibited 9% of fluorescence quantum yield. The nanozyme/film composite was prepared by crosslinking between the amino groups of Cu-CDs and those of chitosan via a glutaraldehyde linker. A H2O2-mediated tetramethylbenzidine (TMB) oxidation reaction was use to evaluate the peroxidase activity of the film. Based on the TMB color changes, colorimetric assays were developed for the detection of H2O2 and glucose at an absorption wavelength 652 nm. Under the optimal conditions, the linear ranges for H2O2 and glucose were 0.625-40 µM and 1.9-125 µM, respectively, and the detection limits were 0.12 µM and 0.69 µM, respectively. The colorimetric assay was also applied to analyze diluted human serum samples spiked with glucose. Furthermore, this biodegradable, non-toxic, and easy-to-handle nanozyme composite could be stored for over 4 weeks without a significant decrease in activity.

| S-EPMC9293876 | biostudies-literature

Characterization of lactic acid and acetic acid mutants in batch fermentation

Project description:Four C. thermocellum DSM-1313 derived strains were assessed using metabolite and DNA microarray tools in order to better understand carbon and electron flow within this organism. C. thermocellum is able to ferment cellulose into its fermentation end products L-lactate, acetate, formate, hydrogen gas, and ethanol, with the latter being the desired end product to be used as biorenewable fuel. In addition to the parent strain (genotype: hpt spo0A), strains with either or both of the genes encoding lactate dehydrogenase (ldh) and phosphate acetyltransferase (pta) deleted were studied. The strains used are a parent strain (M1726: genotype: hpt spo0A), and strains with either the gene encoding lactate dehydrogenase (M1629: hpt spo0A ldh) or phosphate acetyltransferase (M1630: hpt spo0A pta) deleted, or with both genes deleted (M1725: hpt spo0A ldh pta). Controlled batch fermentations using cellobiose as sole carbon source were grown for each strain, and samples in mid-exponential phase and at the time of carbon depletion were examined by DNA microarray.

2012-03-01 | GSE27046 | GEO

Synthesis, characterization, and electrospinning of novel polyaniline-peptide polymers.

Project description:Aniline-peptide (FLDQV, FLDQVC, Dansyl-FLDQV, Dansyl-FLDQVC, and FLDQV-AMC) mixtures underwent oxidative chemical and electrochemical polymerization in excess of aniline. The products of the chemical polymerization were low molecular weight polymers containing more than 70% peptide. Electrochemically polymerized species polyaniline-FLDQV (PANI-FLDQV) consisted mainly of polyaniline units containing about 10% peptide. The solubility of the latter in 1,1,1,3,3,3-hexafluoro-2-propanol (HFP) was similar to the camphorsulfonic acid (CSA) doped emeraldine base (PANI-CSA) solubility, however the weight composition of the electrospun fibers produced from the two polymers was significantly different. 2D 1H-13C HSQC analyses were employed to analyze the binding between the aniline and peptide moieties. Binding of peptide to polyaniline is reflected by the appearance of extra cross-peaks which display line broadening between the free polyaniline and the free pentapeptide. Peptides may be chemically bonded to the polymer molecules, but they may also act as doping agents to the nitrogen atoms via hydrogen bonding.

| S-EPMC5794223 | biostudies-literature

Preparation and Characterization of Chitosan-Agarose Composite Films.

Project description:Nowadays, there is a growing interest to develop biodegradable functional composite materials for food packaging and biomedicine applications from renewable sources. Some composite films were prepared by the casting method using chitosan (CS) and agarose (AG) in different mass ratios. The composite films were analyzed for physical-chemical-mechanical properties including tensile strength (TS), elongation-at-break (EB), water vapor transmission rate (WVTR), swelling ratio, Fourier-transform infrared spectroscopy, and morphology observations. The antibacterial properties of the composite films were also evaluated. The obtained results reveal that an addition of AG in varied proportions to a CS solution leads to an enhancement of the composite film's tensile strength, elongation-at-break, and water vapor transmission rate. The composite film with an agarose mass concentration of 60% was of the highest water uptake capacity. These improvements can be explained by the chemical structures of the new composite films, which contain hydrogen bonding interactions between the chitosan and agarose as shown by Fourier-transform infrared spectroscopy (FTIR) analysis and the micro-pore structures as observed with optical microscopes and scanning electron microscopy (SEM). The antibacterial results demonstrated that the films with agarose mass concentrations ranging from 0% to 60% possessed antibacterial properties. These results indicate that these composite films, especially the composite film with an agarose mass concentration of 60%, exhibit excellent potential to be used in food packaging and biomedical materials.

| S-EPMC5456607 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data