Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

[Cu3(C6Se6)] n : The First Highly Conductive 2D ?-d Conjugated Coordination Polymer Based on Benzenehexaselenolate.

ABSTRACT: Nanocrystals of a 2D ?-d conjugated copper bis(diselenolene) coordination polymer (Cu-BHS, BHS = benzenehexaselenolate) are synthesized via a simple homogeneous reaction between cupric ions and benzenehexaselenol (H6BHS). Its 2D extended hexagonal lattice is confirmed by powder X-ray diffraction, and further characterized by scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. The electrical conductivity measured on compressed powder sample reaches 110 S cm-1 at 300 K, which is among the highest value ever reported for coordination polymers. Furthermore, the intrinsic metallic characteristics of Cu-BHS are confirmed by ultraviolet photoelectron spectroscopy and band structure calculation.

SUBMITTER: Cui Y

PROVIDER: S-EPMC6498113 | biostudies-literature | 2019 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

[Cu3(C6Se6)] n : The First Highly Conductive 2D π-d Conjugated Coordination Polymer Based on Benzenehexaselenolate.

Cui Yutao Y Yan Jie J Chen Zhijun Z Zhang Jiajia J Zou Ye Y Sun Yimeng Y Xu Wei W Zhu Daoben D

Advanced science (Weinheim, Baden-Wurttemberg, Germany) 20190309 9

Nanocrystals of a 2D π-d conjugated copper bis(diselenolene) coordination polymer (Cu-BHS, BHS = benzenehexaselenolate) are synthesized via a simple homogeneous reaction between cupric ions and benzenehexaselenol (H6BHS). Its 2D extended hexagonal lattice is confirmed by powder X-ray diffraction, and further characterized by scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. The electrical conductivity measured on compressed powder sa ...[more]

PMID: 31065526

Similar Datasets

Highly electrically conductive nanocomposites based on polymer-infused graphene sponges.

Project description:Conductive polymer composites require a three-dimensional 3D network to impart electrical conductivity. A general method that is applicable to most polymers for achieving a desirable graphene 3D network is still a challenge. We have developed a facile technique to fabricate highly electrical conductive composite using vacuum-assisted infusion of epoxy into graphene sponge GS scaffold. Macroscopic GSs were synthesized from graphene oxide solution by a hydrothermal method combined with freeze drying. The GS/epoxy composites prepared display consistent isotropic electrical conductivity around 1 S/m, and it is found to be close to that of the pristine GS. Compared with neat epoxy, GS/epoxy has a 12-orders-of-magnitude increase in electrical conductivity, attributed to the compactly interconnected graphene network constructed in the polymer matrix. This method can be extended to other materials to fabricate highly conductive composites for practical applications such as electronic devices, sensors, actuators, and electromagnetic shielding.

| S-EPMC3983941 | biostudies-literature

Highly Conductive Polyoxanorbornene-Based Polymer Electrolyte for Lithium-Metal Batteries.

Project description:This present study illustrates the synthesis and preparation of polyoxanorbornene-based bottlebrush polymers with poly(ethylene oxide) (PEO) side chains by ring-opening metathesis polymerization for solid polymer electrolytes (SPE). In addition to the conductive PEO side chains, the polyoxanorbornene backbones may act as another ion conductor to further promote Li-ion movement within the SPE matrix. These results suggest that these bottlebrush polymer electrolytes provide impressively high ionic conductivity of 7.12 × 10-4 S cm-1 at room temperature and excellent electrochemical performance, including high-rate capabilities and cycling stability when paired with a Li metal anode and a LiFePO4 cathode. The new design paradigm, which has dual ionic conductive pathways, provides an unexplored avenue for inventing new SPEs and emphasizes the importance of molecular engineering to develop highly stable and conductive polymer electrolytes for lithium-metal batteries (LMB).

| S-EPMC10520635 | biostudies-literature

Hybrid Antibacterial and Electro-conductive Coating for Textiles Based on Cationic Conjugated Polymer.

Project description:The development of efficient synthetic strategies for incorporating antibacterial coatings into textiles for pharma and medical applications is of great interest. This paper describes the preparation of functional nonwoven fabrics coated with polyaniline (PANI) via in situ polymerization of aniline in aqueous solution. The effect of three different monomer concentrations on the level of polyaniline coating on the fibers comprising the fabrics, and its electrical resistivities and antibacterial attributes, were studied. Experimental results indicated that weight gains of 0.7 and 3.0 mg/cm2 of PANI were achieved. These levels of coatings led to the reduction of both volume and surface resistivities by several orders of magnitude for PANI-coated polyester-viscose fabrics, i.e., from 108 to 105 (Ω/cm) and from 109 to 105 Ω/square, respectively. Fourier Transform Infrared (FTIR) Spectroscopy and Scanning Electron Microscopy (SEM) confirmed the incorporation of PANI coating with an average thickness of 0.4-1.5 µm, while Thermogravimetric Analysis (TGA) demonstrated the preservation of the thermal stability of the pristine fabrics. The unique molecular structure of PANI, consisting of quaternary ammonium ions under acidic conditions, yielded an antibacterial effect in the modified fabrics. The results revealed that all types of PANI-coated fabrics totally killed S. aureus bacteria, while PANI-coated viscose fabrics also demonstrated 100% elimination of S. epidermidis bacteria. In addition, PANI-coated, PET-viscose and PET fabrics showed 2.5 log and 5.5 log reductions against S. epidermidis, respectively.

| S-EPMC7407370 | biostudies-literature

A highly stretchable, transparent, and conductive polymer.

Project description:Previous breakthroughs in stretchable electronics stem from strain engineering and nanocomposite approaches. Routes toward intrinsically stretchable molecular materials remain scarce but, if successful, will enable simpler fabrication processes, such as direct printing and coating, mechanically robust devices, and more intimate contact with objects. We report a highly stretchable conducting polymer, realized with a range of enhancers that serve a dual function: (i) they change morphology and (ii) they act as conductivity-enhancing dopants in poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The polymer films exhibit conductivities comparable to the best reported values for PEDOT:PSS, with over 3100 S/cm under 0% strain and over 4100 S/cm under 100% strain-among the highest for reported stretchable conductors. It is highly durable under cyclic loading, with the conductivity maintained at 3600 S/cm even after 1000 cycles to 100% strain. The conductivity remained above 100 S/cm under 600% strain, with a fracture strain of 800%, which is superior to even the best silver nanowire- or carbon nanotube-based stretchable conductor films. The combination of excellent electrical and mechanical properties allowed it to serve as interconnects for field-effect transistor arrays with a device density that is five times higher than typical lithographically patterned wavy interconnects.

| S-EPMC5345924 | biostudies-literature

A Zn(II)-Based Sql Type 2D Coordination Polymer as a Highly Sensitive and Selective Turn-On Fluorescent Probe for Al3.

Project description:A luminescent coordination polymer with the overall formula {[Zn(tr2btd)(bpdc)]∙DMF}n (where tr2btd = 4,7-di(1H-1,2,4-triazol-1-yl)-2,1,3-benzothiadiazole; bpdc = 4,4'-biphenyldicarboxylate) was synthesized and characterized by single-crystal and powder X-ray diffraction, thermogravimetric, infrared spectroscopy, and elemental analyses. Luminescent properties of the obtained compound were studied in detail both in the solid state and as a suspension in N,N-dimethylacetamide (DMA). It was found that {[Zn(tr2btd)(bpdc)]∙DMF}n exhibits bright turquoise luminescence with excellent quantum efficiency and demonstrates turn-on fluorescence enhancement effect upon soaking in DMA Al3+ solution. Fluorescence titration experiments were carried out and the detection limit for Al3+ ions was calculated to be 120 nM, which is among the lowest reported values for similar materials. Moreover, compound demonstrated excellent selectivity and reusability, and the mechanism of the response is discussed. These results indicate that {[Zn(tr2btd)(bpdc)]∙DMF}n is a promising probe for sensitive fluorescent Al3+ detection.

| S-EPMC8658932 | biostudies-literature

Synthesis of Zn-based 1D and 2D coordination polymer nanoparticles in block copolymer micelles.

Project description:Nanoparticles of the 1D and 2D coordination polymers [Zn(OAc)2(bipy)] n and [Zn(TFA)2(bppa)2] n were prepared, employing polystyrene-block-poly(4-vinylpyridine) diblock copolymers with different weight fractions of the 4-vinylpyridine (4VP) block and comparable overall molecular weights of M n ≈ 155 kg mol-1 as template (SV-15 and SV-42 with 15 and 42 wt% 4VP, respectively). [Zn(OAc)2(bipy)] n nanoparticles were successfully synthesised within the 4VP core of SV-42 micelles, showing a core size of D core = 47 ± 5 nm and a hydrodynamic diameter of D h = 157 ± 46 nm, determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS). The crystallinity of the composite is quite low, showing only low intensity reflexes in the powder X-ray diffraction (PXRD) pattern with the highest particle load. No indications for larger microcrystals were detected by scanning electron microscopy (SEM), proving the successful integration of the coordination polymer nanoparticles within the micellar cores. Nanocomposites of the 2D coordination network [Zn(TFA)2(bppa)2] n were synthesised using both diblock copolymers. The particle core sizes (from TEM) and hydrodynamic diameters (from DLS) correlate with the 4VP fraction of the micelles, resulting in D core = 46 ± 6 nm for SV-42 and 15 ± 2 nm for SV-15 and D h = 340 ± 153 nm and 177 ± 57 nm, respectively. The successful synthesis was proven by PXRD and SEM images, confirming the absence of larger crystallites. Hence, it is possible to synthesise nanocomposites of Zn-based 1D and 2D coordination polymers by a direct approach utilizing diblock copolymer micelles as template.

| S-EPMC9418959 | biostudies-literature

Proton-conductive coordination polymer glass for solid-state anhydrous proton batteries.

Project description:Designing solid-state electrolytes for proton batteries at moderate temperatures is challenging as most solid-state proton conductors suffer from poor moldability and thermal stability. Crystal-glass transformation of coordination polymers (CPs) and metal-organic frameworks (MOFs) via melt-quenching offers diverse accessibility to unique properties as well as processing abilities. Here, we synthesized a glassy-state CP, [Zn3(H2PO4)6(H2O)3](1,2,3-benzotriazole), that exhibited a low melting temperature (114 °C) and a high anhydrous single-ion proton conductivity (8.0 × 10-3 S cm-1 at 120 °C). Converting crystalline CPs to their glassy-state counterparts via melt-quenching not only initiated an isotropic disordered domain that enhanced H+ dynamics, but also generated an immersive interface that was beneficial for solid electrolyte applications. Finally, we demonstrated the first example of a rechargeable all-solid-state H+ battery utilizing the new glassy-state CP, which exhibited a wide operating-temperature range of 25 to 110 °C.

| S-EPMC8179665 | biostudies-literature

11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor.

Project description:Simutaneously high open circuit voltage and high short circuit current density is a big challenge for achieving high efficiency polymer solar cells due to the excitonic nature of organic semdonductors. Herein, we developed a trialkylsilyl substituted 2D-conjugated polymer with the highest occupied molecular orbital level down-shifted by Si-C bond interaction. The polymer solar cells obtained by pairing this polymer with a non-fullerene acceptor demonstrated a high power conversion efficiency of 11.41% with both high open circuit voltage of 0.94?V and high short circuit current density of 17.32?mA?cm-2 benefitted from the complementary absorption of the donor and acceptor, and the high hole transfer efficiency from acceptor to donor although the highest occupied molecular orbital level difference between the donor and acceptor is only 0.11?eV. The results indicate that the alkylsilyl substitution is an effective way in designing high performance conjugated polymer photovoltaic materials.

| S-EPMC5146271 | biostudies-literature

Gold nanorods with conjugated polymer ligands: sintering-free conductive inks for printed electronics.

Project description:Metal-based nanoparticle inks for printed electronics usually require sintering to improve the poor electron transport at particle-particle interfaces. The ligands required for colloidal stability act as insulating barriers and must be removed in a post-deposition sintering step. This complicates the fabrication process and makes it incompatible with many flexible substrates. Here, we bind a conjugated, electrically conductive polymer on gold nanorods (AuNRs) as a ligand. The polymer, poly[2-(3-thienyl)-ethyloxy-4-butylsulfonate] (PTEBS), provides colloidal stability and good electron transport properties to stable, sintering-free inks. We confirm that the polymer binds strongly through a multidentate binding motif and provides superior colloidal stability in polar solvents over months by IR and Raman spectrometry and zeta potential measurements. We demonstrate that the developed ligand exchange protocol is directly applicable to other polythiophenes such as poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS). Films of AuNRs coated with above polymers reached conductivities directly after deposition comparable to conventional metal inks after ligand removal and retained their conductivity for at least one year when stored under ambient conditions.

| S-EPMC6014069 | biostudies-literature

Solvent-tuned ultrasonic synthesis of 2D coordination polymer nanostructures and flakes.

Project description:Herein, a new 2-dimensional coordination polymer based on copper (II), {Cu2(L)(DMF)2}n, where L stands for 1,2,4,5-benzenetetracarboxylate (complex 1) is synthesized. Interestingly, we demonstrate that both solvent and sonication are relevant in the top-down fabrication of nanostructures. Water molecules are intercalated in suspended crystals of complex 1 modifying not only the coordination sphere of Cu(II) ions but also the final chemical formula and crystalline structure obtaining {[Cu(L)(H2O)3]·H2O}n (complex 2). On the other hand, ultrasound is required to induce the nanostructuration. Remarkably, different morphologies are obtained using different solvents and interconversion from one morphology to another seems to occur upon solvent exchange. Both complexes 1 and 2, as well as the corresponding nanostructures, have been fully characterized by different means such as infrared spectroscopy, x-ray diffraction and microscopy.

| S-EPMC7803821 | biostudies-literature