Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Experimental data on the photoelectrochemical oxidation of phenol: Analysis of pH, potential and initial concentration.

ABSTRACT: The data collected in the present work correspond to percentages of phenol degradation by means of photoelectrochemical oxidation (PEC). Also, the information related to the energetic and kinetic performance of this advanced oxidation process (AOPs) is shown. The tests were divided into two stages: 1. Supporting electrolytes tests to determine the electrolyte that presents a better response to photocurrent and 2. Degradation of phenol to obtain the adequate conditions for the elimination of the contaminant. A central rotary composite design with uniform precision at two levels was used to analyze the influence of the initial pH, electrode potential and the initial concentration of substrate. Finally, with all the data obtained, calculation of degradation rates and the electrical energy per order EEO were made.

SUBMITTER: Villota-Zuleta JA

PROVIDER: S-EPMC6503135 | biostudies-literature | 2019 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Experimental data on the photoelectrochemical oxidation of phenol: Analysis of pH, potential and initial concentration.

Villota-Zuleta J A JA Rodríguez-Acosta J W JW Castilla-Acevedo S F SF Marriaga-Cabrales N N Machuca-Martínez F F

Data in brief 20190425

The data collected in the present work correspond to percentages of phenol degradation by means of photoelectrochemical oxidation (PEC). Also, the information related to the energetic and kinetic performance of this advanced oxidation process (AOPs) is shown. The tests were divided into two stages: 1. Supporting electrolytes tests to determine the electrolyte that presents a better response to photocurrent and 2. Degradation of phenol to obtain the adequate conditions for the elimination of the ...[more]

PMID: 31080862

Similar Datasets

Enhanced photoelectrochemical activities for water oxidation and phenol degradation on WO<sub>3</sub> nanoplates by transferring electrons and trapping holes.

Project description:It is highly desired to improve the photoelectrochemical (PEC) performance of nanosized WO3 by artificially modulating the photogenerated electrons and holes simultaneously. Herein, WO3 nanoplates have been successfully prepared by a simple one-pot two-phase separated hydrolysis-solvothermal method, and then co-modified with RGO and phosphate acid successively by wet chemical processes. Subsequently, the as-prepared WO3-based nanoplates were immobilized on the conductive glasses to explore the PEC activities for both water oxidation to evolve O2 and phenol degradation. It is clearly demonstrated that the co-modified WO3 nanoplates exhibit significantly improved PEC activities compared with pristine WO3, especially for that with the amount-optimized modifiers by ca. 6-time enhancement. Mainly based on the evaluated hydroxyl radical amounts produced and the electrochemical impedance spectra, it is suggested that the improved PEC activities are attributed to the greatly enhanced photogenerated charge separation after chemically modification with RGO and phosphate groups to WO3, respectively by transferring electrons as the collectors and trapping holes via the formed negative field after phosphate disassociation. This work provides a feasible synthetic strategy to improve the photoactivities of nanosized WO3 for energy production and environmental remediation.

| S-EPMC5430972 | biostudies-literature

Data of oxygen- and pH-dependent oxidation of resveratrol.

Project description:We show here if under physiologically relevant conditions resveratrol (RSV) remains stable or not. We further show under which circumstances various oxidation products of RSV such as ROS can be produced. For example, in addition to the widely known effect of bicarbonate ions, high pH values promote the decay of RSV. Moreover, we analyse the impact of reduction of the oxygen partial pressure on the pH-dependent oxidation of RSV. For further interpretation and discussion of these focused data in a broader context we refer to the article "Hormetic shifting of redox environment by pro-oxidative resveratrol protects cells against stress" (Plauth et al., in press) [1].

| S-EPMC5037118 | biostudies-literature

Dosimetry determines the initial OH radical concentration in fast photochemical oxidation of proteins (FPOP).

Project description:Fast photochemical oxidation of proteins (FPOP) employs laser photolysis of hydrogen peroxide to give OH radicals that label amino acid side-chains of proteins on the microsecond time scale. A method for quantitation of hydroxyl radicals after laser photolysis is of importance to FPOP because it establishes a means to adjust the yield of •OH, offers the opportunity of tunable modifications, and provides a basis for kinetic measurements. The initial concentration of OH radicals has yet to be measured experimentally. We report here an approach using isotope dilution gas chromatography/mass spectrometry (GC/MS) to determine quantitatively the initial •OH concentration (we found ~0.95 mM from 15 mM H2O2) from laser photolysis and to investigate the quenching efficiencies for various •OH scavengers.

| S-EPMC5613943 | biostudies-literature

Photoelectrochemical oxidation of organic substrates in organic media.

Project description:There is a global effort to convert sunlight into fuels by photoelectrochemically splitting water to form hydrogen fuels, but the dioxygen byproduct bears little economic value. This raises the important question of whether higher value commodities can be produced instead of dioxygen. We report here photoelectrochemistry at a BiVO4 photoanode involving the oxidation of substrates in organic media. The use of MeCN instead of water enables a broader set of chemical transformations to be performed (e.g., alcohol oxidation and C-H activation/oxidation), while suppressing photocorrosion of BiVO4 that otherwise occurs readily in water, and sunlight reduces the electrical energy required to drive organic transformations by 60%. These collective results demonstrate the utility of using photoelectrochemical cells to mediate organic transformations that otherwise require expensive and toxic reagents or catalysts.Photoelectrochemical water splitting is a promising method for H2 fuel production, but the O2 by-product generated has little economic value. Here, Berlinguette and colleagues demonstrate that BiVO4 photoanodes immersed in organic media can instead perform valuable alcohol oxidation and C-H functionalization reactions.

| S-EPMC5577226 | biostudies-literature

Photoelectrochemical water oxidation by a MOF/semiconductor composite.

Project description:Artificial photosynthesis is one of the most promising forms of renewable fuel production, due to the abundance of water, carbon dioxide, and sunlight. However, the water oxidation reaction remains a significant bottleneck due to the high thermodynamic and kinetic requirements of the four-electron process. While significant work has been done on the development of catalysts for water splitting, many of the catalysts reported to date operate at high overpotentials or with the use of sacrificial oxidants to drive the reaction. Here, we present a catalyst embedded metal-organic framework (MOF)/semiconductor composite that performs photoelectrochemical oxidation of water at a formal underpotential. Ru-UiO-67 (where Ru stands for the water oxidation catalyst [Ru(tpy)(dcbpy)OH2]2+ (tpy = 2,2':6',2''-terpyridine, dcbpy = 5,5-dicarboxy-2,2'-bipyridine)) has been previously shown to be active for water oxidation under both chemical and electrochemical conditions, but here we demonstrate, for the first time, incorporation of a light harvesting n-type semiconductor as a base photoelectrode. Ru-UiO-67/WO3 is active for photoelectrochemical water oxidation at a thermodynamic underpotential (η ≈ 200 mV; Eonset = 600 mV vs. NHE), and incorporation of a molecular catalyst onto the oxide layer increases efficiency of charge transport and separation over bare WO3. The charge-separation process was evaluated with ultrafast transient absorption spectroscopy (ufTA) and photocurrent density measurements. These studies suggest that a key contributor to the photocatalytic process involves a hole transfer from excited to Ru-UiO-67. To our knowledge, this is the first report of a MOF-based catalyst active for water oxidation at a thermodynamic underpotential, a key step towards light-driven water oxidation.

| S-EPMC10171202 | biostudies-literature

Monolithic FAPbBr<sub>3</sub> photoanode for photoelectrochemical water oxidation with low onset-potential and enhanced stability.

Project description:Despite considerable research efforts on photoelectrochemical water splitting over the past decades, practical application faces challenges by the absence of efficient, stable, and scalable photoelectrodes. Herein, we report a metal-halide perovskite-based photoanode for photoelectrochemical water oxidation. With a planar structure using mesoporous carbon as a hole-conducting layer, the precious metal-free FAPbBr3 photovoltaic device achieves 9.2% solar-to-electrical power conversion efficiency and 1.4 V open-circuit voltage. The photovoltaic architecture successfully applies to build a monolithic photoanode with the FAPbBr3 absorber, carbon/graphite conductive protection layers, and NiFe catalyst layers for water oxidation. The photoanode delivers ultralow onset potential below 0 V versus the reversible hydrogen electrode and high applied bias photon-to-current efficiency of 8.5%. Stable operation exceeding 100 h under solar illumination by applying ultraviolet-filter protection. The photothermal investigation verifies the performance boost in perovskite photoanode by photothermal effect. This study is significant in guiding the development of photovoltaic material-based photoelectrodes for solar fuel applications.

| S-EPMC10484934 | biostudies-literature

Better Together: Ilmenite/Hematite Junctions for Photoelectrochemical Water Oxidation.

Project description:Hematite (α-Fe2O3) is an earth-abundant indirect n-type semiconductor displaying a band gap of about 2.2 eV, useful for collecting a large fraction of visible photons, with frontier energy levels suitably aligned for carrying out the photoelectrochemical water oxidation reaction under basic conditions. The modification of hematite mesoporous thin-film photoanodes with Ti(IV), as well as their functionalization with an oxygen-evolving catalyst, leads to a 6-fold increase in photocurrent density with respect to the unmodified electrode. In order to provide a detailed understanding of this behavior, we report a study of Ti-containing phases within the mesoporous film structure. Using X-ray absorption fine structure and high-resolution transmission electron microscopy coupled with electron energy loss spectroscopy, we find that Ti(IV) ions are incorporated within ilmenite (FeTiO3) near-surface layers, thus modifying the semiconductor-electrolyte interface. To the best of our knowledge, this is the first time that an FeTiO3/α-Fe2O3 composite is used in a photoelectrochemical setup for water oxidation. In fact, previous studies of Ti(IV)-modified hematite photoanodes reported the formation of pseudobrookite (Fe2TiO5) at the surface. By means of transient absorption spectroscopy, transient photocurrent experiments, and electrochemical impedance spectroscopy, we show that the formation of the Fe2O3/FeTiO3 interface passivates deep traps at the surface and induces a large density of donor levels, resulting in a strong depletion field that separates electron and holes, favoring hole injection in the electrolyte. Our results provide the identification of a phase coexistence with enhanced photoelectrochemical performance, allowing for the rational design of new photoanodes with improved kinetics.

| S-EPMC8014905 | biostudies-literature

Selective CO Production by Photoelectrochemical Methane Oxidation on TiO2.

Project description:The inertness of the C-H bond in CH4 poses significant challenges to selective CH4 oxidation, which often proceeds all the way to CO2 once activated. Selective oxidation of CH4 to high-value industrial chemicals such as CO or CH3OH remains a challenge. Presently, the main methods to activate CH4 oxidation include thermochemical, electrochemical, and photocatalytic reactions. Of them, photocatalytic reactions hold great promise for practical applications but have been poorly studied. Existing demonstrations of photocatalytic CH4 oxidation exhibit limited control over the product selectivity, with CO2 as the most common product. The yield of CO or other hydrocarbons is too low to be of any practical value. In this work, we show that highly selective production of CO by CH4 oxidation can be achieved by a photoelectrochemical (PEC) approach. Under our experimental conditions, the highest yield for CO production was 81.9%. The substrate we used was TiO2 grown by atomic layer deposition (ALD), which features high concentrations of Ti3+ species. The selectivity toward CO was found to be highly sensitive to the substrate types, with significantly lower yield on P25 or commercial anatase TiO2 substrates. Moreover, our results revealed that the selectivity toward CO also depends on the applied potentials. Based on the experimental results, we proposed a reaction mechanism that involves synergistic effects by adjacent Ti sites on TiO2. Spectroscopic characterization and computational studies provide critical evidence to support the mechanism. Furthermore, the synergistic effect was found to parallel heterogeneous CO2 reduction mechanisms. Our results not only present a new route to selective CH4 oxidation, but also highlight the importance of mechanistic understandings in advancing heterogeneous catalysis.

| S-EPMC5968511 | biostudies-literature

Kinetics of Photoelectrochemical Oxidation of Methanol on Hematite Photoanodes.

Project description:The kinetics of photoelectrochemical (PEC) oxidation of methanol, as a model organic substrate, on α-Fe2O3 photoanodes are studied using photoinduced absorption spectroscopy and transient photocurrent measurements. Methanol is oxidized on α-Fe2O3 to formaldehyde with near unity Faradaic efficiency. A rate law analysis under quasi-steady-state conditions of PEC methanol oxidation indicates that rate of reaction is second order in the density of surface holes on hematite and independent of the applied potential. Analogous data on anatase TiO2 photoanodes indicate similar second-order kinetics for methanol oxidation with a second-order rate constant 2 orders of magnitude higher than that on α-Fe2O3. Kinetic isotope effect studies determine that the rate constant for methanol oxidation on α-Fe2O3 is retarded ∼20-fold by H/D substitution. Employing these data, we propose a mechanism for methanol oxidation under 1 sun irradiation on these metal oxide surfaces and discuss the implications for the efficient PEC methanol oxidation to formaldehyde and concomitant hydrogen evolution.

| S-EPMC5594441 | biostudies-literature

Direct photoelectrochemical oxidation of hydroxymethylfurfural on tungsten trioxide photoanodes.

Project description:An important target reaction for solar-powered biomass valorization is the conversion of 2,5-hydroxymethylfurfural (HMF) into key monomers for polyester production. Herein, photoanodes of WO3 are demonstrated to directly photo-oxidize HMF in aqueous electrolyte (pH 4) under simulated solar illumination. The addition of 5 mM HMF increases the saturation photocurrent by 26% and suppresses the water oxidation reaction, as determined by rotating ring-disk electrode experiments. Prolonged photoelectrochemical oxidation (64 h) illustrates system robustness and confirms the production of furandicarboxaldehyde (DFF), furandicarboxylic acid (FDCA), and related intermediates. Quantification of the reaction rate constants via a kinetic model gives insight into the modest DFF and FDCA yields (up to 4% and 1%, respectively)-which is due to the formation of by-products-and suggests routes for improvement.

| S-EPMC8690328 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data