Browse
Submit Data
Databases
API
Help

Dataset Information

32 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Relaxation Dynamics of Thin Matrimid 5218 Films in Organic Solvents.

ABSTRACT: Polyimides are interesting polymer materials for organic solvent nanofiltration (OSN) applications because of their high excess free volume and high chemical and temperature resistance. However, an open challenge that remains for glassy polymer materials (i.e., polyimides) is their tendency to swell in organic solvents which can lead to a loss of performance. An understanding on how swelling influences the polymer properties and performance is then of crucial importance for assessing polyimide suitability in OSN applications. Here, the combination of in situ spectroscopic ellipsometry (iSE), broadband dielectric spectroscopy (BDS), and diffuse reflectance Fourier transform infrared spectroscopy (DRIFT-FTIR) is applied to study the molecular interaction of two organic penetrants, toluene and n-hexane, with Matrimid 5218 in detail. iSE shows that slightly cross-linked Matrimid 5218 swells approximately seven times more in toluene (swelling degree ≈ 28%) compared to in n-hexane (swelling degree ≈ 4%). Combined BDS and DRIFT-FTIR results indicate that toluene interacts with the benzene ring present in the diamine via π-π interactions, while n-hexane likely fills up the excess free volume and interacts via local van der Waals interactions. This work highlights the insights into the exact nature of the molecular interactions between the penetrant and polymer that can be gained from a combination of BDS and other techniques and how these insights can be used to estimate or understand solvent-induced swelling of polymers used in OSN applications.

SUBMITTER: Tempelman K

PROVIDER: S-EPMC6511941 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Post-Growth Dynamics and Growth Modeling of Organic Semiconductor Thin Films.

Project description:The ability to control the properties of organic thin films is crucial for obtaining highly performant thin-film devices. However, thin films may experience post-growth processes, even when the most sophisticated and controlled growth techniques such as organic molecular beam epitaxy (OMBE) are used. Such processes can modify the film structure and morphology and, thus, the film properties ultimately affecting device performances. For this reason, probing the occurrence of post-growth evolution is essential. Equally importantly, the processes responsible for this evolution should be addressed in view of finding a strategy to control and, possibly, leverage them for driving film properties. Here, nickel-tetraphenylporphyrin (NiTPP) thin films grown by OMBE on highly oriented pyrolytic graphite (HOPG) are selected as an exemplary system exhibiting a remarkable post-growth morphology evolution consistent with Ostwald-like ripening. To quantitatively describe the growth, the height-height correlation function (HHCF) analysis of the atomic force microscopy (AFM) images is carried out, clarifying the role of the post-growth evolution as an integral part of the whole growth process. The set of scaling exponents obtained confirms that the growth is mainly driven by diffusion combined with the presence of step-edge barriers, in agreement with the observed ripening phenomenon. Finally, the results together with the overall approach adopted demonstrate the reliability of the HHCF analysis in systems displaying post-growth evolution.

| S-EPMC9996818 | biostudies-literature

In situ intercalation dynamics in inorganic-organic layered perovskite thin films.

Project description:The properties of layered inorganic semiconductors can be manipulated by the insertion of foreign molecular species via a process known as intercalation. In the present study, we investigate the phenomenon of organic moiety (R-NH3I) intercalation in layered metal-halide (PbI2)-based inorganic semiconductors, leading to the formation of inorganic-organic (IO) perovskites [(R-NH3)2PbI4]. During this intercalation strong resonant exciton optical transitions are created, enabling study of the dynamics of this process. Simultaneous in situ photoluminescence (PL) and transmission measurements are used to track the structural and exciton evolution. On the basis of the experimental observations, a model is proposed which explains the process of IO perovskite formation during intercalation of the organic moiety through the inorganic semiconductor layers. The interplay between precursor film thickness and organic solution concentration/solvent highlights the role of van der Waals interactions between the layers, as well as the need for maintaining stoichiometry during intercalation. Nucleation and growth occurring during intercalation matches a Johnson-Mehl-Avrami-Kolmogorov model, with results fitting both ideal and nonideal cases.

| S-EPMC4092025 | biostudies-other

Ribbon curling via stress relaxation in thin polymer films.

Project description:The procedure of curling a ribbon by running it over a sharp blade is commonly used when wrapping presents. Despite its ubiquity, a quantitative explanation of this everyday phenomenon is still lacking. We address this using experiment and theory, examining the dependence of ribbon curvature on blade curvature, the longitudinal load imposed on the ribbon, and the speed of pulling. Experiments in which a ribbon is drawn steadily over a blade under a fixed load show that the ribbon curvature is generated over a restricted range of loads, the curvature/load relationship can be nonmonotonic, and faster pulling (under a constant imposed load) results in less tightly curled ribbons. We develop a theoretical model that captures these features, building on the concept that the ribbon under the imposed deformation undergoes differential plastic stretching across its thickness, resulting in a permanently curved shape. The model identifies factors that optimize curling and clarifies the physical mechanisms underlying the ribbon's nonlinear response to an apparently simple deformation.

| S-EPMC4763768 | biostudies-literature

Tuning charge transport dynamics via clustering of doping in organic semiconductor thin films.

Project description:A significant challenge in the rational design of organic thermoelectric materials is to realize simultaneously high electrical conductivity and high induced-voltage in response to a thermal gradient, which is represented by the Seebeck coefficient. Conventional wisdom posits that the polymer alone dictates thermoelectric efficiency. Herein, we show that doping - in particular, clustering of dopants within conjugated polymer films - has a profound and predictable influence on their thermoelectric properties. We correlate Seebeck coefficient and electrical conductivity of iodine-doped poly(3-hexylthiophene) and poly[2,5-bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione-3,6-diyl)-alt-(2,2';5',2'';5'',2'''-quaterthiophen-5,5'''-diyl)] films with Kelvin probe force microscopy to highlight the role of the spatial distribution of dopants in determining overall charge transport. We fit the experimental data to a phonon-assisted hopping model and found that the distribution of dopants alters the distribution of the density of states and the Kang-Snyder transport parameter. These results highlight the importance of controlling dopant distribution within conjugated polymer films for thermoelectric and other electronic applications.

| S-EPMC6610129 | biostudies-literature

Wafer-scale heterostructured piezoelectric bio-organic thin films.

Project description:Piezoelectric biomaterials are intrinsically suitable for coupling mechanical and electrical energy in biological systems to achieve in vivo real-time sensing, actuation, and electricity generation. However, the inability to synthesize and align the piezoelectric phase at a large scale remains a roadblock toward practical applications. We present a wafer-scale approach to creating piezoelectric biomaterial thin films based on γ-glycine crystals. The thin film has a sandwich structure, where a crystalline glycine layer self-assembles and automatically aligns between two polyvinyl alcohol (PVA) thin films. The heterostructured glycine-PVA films exhibit piezoelectric coefficients of 5.3 picocoulombs per newton or 157.5 × 10-3 volt meters per newton and nearly an order of magnitude enhancement of the mechanical flexibility compared with pure glycine crystals. With its natural compatibility and degradability in physiological environments, glycine-PVA films may enable the development of transient implantable electromechanical devices.

| S-EPMC8516594 | biostudies-literature

Cation Influence on Hot-Carrier Relaxation in Tin Triiodide Perovskite Thin Films.

Project description:Slow hot-carrier cooling may potentially allow overcoming the maximum achievable power conversion efficiency of single-junction solar cells. For formamidinium tin triiodide, an exceptional slow cooling time of a few nanoseconds was reported. However, a systematic study of the cation influence, as is present for lead compounds, is lacking. Here, we report the first comparative study on formamidinium, methylammonium, and cesium tin triiodide thin films. By investigating their photoluminescence, we observe a considerable shift of the emission peak to high energy with the increase of the excited-state population, which is more prominent in the case of the two hybrid organic-inorganic perovskites (∼45 meV vs ∼15 meV at 9 × 1017 cm-3 carrier density). The hot-carrier photoluminescence of the three tin compositions decays with a 0.6-2.8 ns time constant with slower cooling observed for the two hybrids, further indicating their importance.

| S-EPMC10928715 | biostudies-literature

Oriented thin films of a benzodithiophene covalent organic framework.

Project description:A mesoporous electron-donor covalent organic framework based on a benzodithiophene core, BDT-COF, was obtained through condensation of a benzodithiophene-containing diboronic acid and hexahydroxytriphenylene (HHTP). BDT-COF is a highly porous, crystalline, and thermally stable material, which can be handled in air. Highly porous, crystalline oriented thin BDT-COF films were synthesized from solution on different polycrystalline surfaces, indicating the generality of the synthetic strategy. The favorable orientation, crystallinity, porosity, and the growth mode of the thin BDT-COF films were studied by means of X-ray diffraction (XRD), 2D grazing incidence diffraction (GID), transmission and scanning electron microscopy (TEM, SEM), and krypton sorption. The highly porous thin BDT-COF films were infiltrated with soluble fullerene derivatives, such as [6,6]-phenyl C61 butyric acid methyl ester (PCBM), to obtain an interpenetrated electron-donor/acceptor host-guest system. Light-induced charge transfer from the BDT-framework to PCBM acceptor molecules was indicated by efficient photoluminescence quenching. Moreover, we monitored the dynamics of photogenerated hole-polarons via transient absorption spectroscopy. This work represents a combined study of the structural and optical properties of highly oriented mesoporous thin COF films serving as host for the generation of periodic interpenetrated electron-donor and electron-acceptor systems.

| S-EPMC4762543 | biostudies-literature

Electrostatic Design of Polar Metal-Organic Framework Thin Films.

Project description:In recent years, optical and electronic properties of metal-organic frameworks (MOFs) have increasingly shifted into the focus of interest of the scientific community. Here, we discuss a strategy for conveniently tuning these properties through electrostatic design. More specifically, based on quantum-mechanical simulations, we suggest an approach for creating a gradient of the electrostatic potential within a MOF thin film, exploiting collective electrostatic effects. With a suitable orientation of polar apical linkers, the resulting non-centrosymmetric packing results in an energy staircase of the frontier electronic states reminiscent of the situation in a pin-photodiode. The observed one dimensional gradient of the electrostatic potential causes a closure of the global energy gap and also shifts core-level energies by an amount equaling the size of the original band gap. The realization of such assemblies could be based on so-called pillared layer MOFs fabricated in an oriented fashion on a solid substrate employing layer by layer growth techniques. In this context, the simulations provide guidelines regarding the design of the polar apical linker molecules that would allow the realization of MOF thin films with the (vast majority of the) molecular dipole moments pointing in the same direction.

| S-EPMC7761790 | biostudies-literature

Quantitative Analysis of Electron Beam Damage in Organic Thin Films.

Project description:In transmission electron microscopy (TEM) the interaction of an electron beam with polymers such as P3HT:PCBM photovoltaic nanocomposites results in electron beam damage, which is the most important factor limiting acquisition of structural or chemical data at high spatial resolution. Beam effects can vary depending on parameters such as electron dose rate, temperature during imaging, and the presence of water and oxygen in the sample. Furthermore, beam damage will occur at different length scales. To assess beam damage at the angstrom scale, we followed the intensity of P3HT and PCBM diffraction rings as a function of accumulated electron dose by acquiring dose series and varying the electron dose rate, sample preparation, and the temperature during acquisition. From this, we calculated a critical dose for diffraction experiments. In imaging mode, thin film deformation was assessed using the normalized cross-correlation coefficient, while mass loss was determined via changes in average intensity and standard deviation, also varying electron dose rate, sample preparation, and temperature during acquisition. The understanding of beam damage and the determination of critical electron doses provides a framework for future experiments to maximize the information content during the acquisition of images and diffraction patterns with (cryogenic) transmission electron microscopy.

| S-EPMC5442601 | biostudies-literature

Comparison of Fabrication Methods of Metal-Organic Framework Optical Thin Films.

Project description:Homogeneous metal-organic frameworks (MOFs)-based optical thin films have attracted increasing attention, since they can potentially be used as active components in optical/opt-electrical devices, and how to fabricate MOF thin films with high quality is the premise of practically using them. Herein, five fabrication methods of MOF films are systematically investigated and compared from the aspects of appearance, reflectivity, micro-morphology, surface roughness, and optical properties of the films. The famous robust Zr-based MOF, UiO-66 (UiO = University of Oslo) is chosen as a model, and the five methods are spin-coating, dip-coating, self-assembly, direct growth, and the stepwise layer by layer growth method. This study provides fundamental support for the application of MOFs in the optical field.

| S-EPMC6164412 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data