Dataset Information

Response of collagen matrices under pressure and hydraulic resistance in hydrogels.

ABSTRACT: Extracellular matrices in animal tissue are hydrogels mostly made of collagen. In these matrices, collagen fibers are hierarchically assembled and cross-linked to form a porous and elastic material, through which migrating cells can move by either pushing through open matrix pores, or by actively digesting collagen fibers. The influence of matrix mechanical properties on cell behavior is well studied. Less attention has been focused on hydraulic properties of extracellular matrices, and how hydrodynamic flows in these porous hydrogels are influenced by matrix composition and architecture. Here we study the response of collagen hydrogels using rapid changes in the hydraulic pressure within a microfluidic device, and analyze the data using a poroelastic theory. Major poroelastic parameters can be obtained in a single experiment. Results show that depending on the density, porosity, and the degree of geometric confinement, moving micron-sized objects such as cells can experience substantially increased hydraulic resistance (by as much as 106 times) when compared to 2D environments. Therefore, in addition to properties such as mechanical stiffness, the fluidic environment of the cell is also likely to impact cell behavior.

SUBMITTER: Maity D

PROVIDER: S-EPMC6512315 | biostudies-literature | 2019 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Response of collagen matrices under pressure and hydraulic resistance in hydrogels.

Maity Debonil D Li Yizeng Y Chen Yun Y Sun Sean X SX

Soft matter 20190301 12

Extracellular matrices in animal tissue are hydrogels mostly made of collagen. In these matrices, collagen fibers are hierarchically assembled and cross-linked to form a porous and elastic material, through which migrating cells can move by either pushing through open matrix pores, or by actively digesting collagen fibers. The influence of matrix mechanical properties on cell behavior is well studied. Less attention has been focused on hydraulic properties of extracellular matrices, and how hydr ...[more]

PMID: 30810567

Similar Datasets

Project description:The fibroblast-populated 3D collagen matrix has been used to study the effect of mechanical stress on cell fate; this process is relevant to the fields of wound healing and tissue engineering. Gene array data was generated from mechanically stressed vs. stress-released matrices. The parameters of the collagen matrix model were: collagen type = bovine type I; collagen concentration = 1.5 mg/mL; initial matrix volume = 0.2 mL; initial matrix diameter = 11 mm (cultured in 24-well plates); cell type = human foreskin fibroblast, passage <10; initial matrix cell concentration = 1,000,000 cell/mL (200,000 cell/matrix); culture medium = 5% FBS in DMEM with 1 M-BM-5g/mL ascorbate. Matrices (n = 6 per experimental group) were incubated for 24 hr in the attached state; the released groups then underwent matrix detachment from the culture plate (defined as t = 0), while the attached groups were left undisturbed. RNA was isolated from attached and released matrices 6 and 24 hr after t = 0. Gene expression in the attached vs. released condition at 6 or 24 hr then was analyzed by hybridizing the anti-sense RNA derived from attached and released matrices at a given time point onto a single chip. Refer to the attached Figure 1 for the experimental design. The index experiment was defined as the comparison of gene expression in attached vs. released collagen matrices in a single strain of human foreskin fibroblasts at 6 and 24 hr after stress-release (i.e., after t = 0). Each experiment utilized two mechanical conditions (attached and released) at two time points (6 and 24 hr). So with each condition utilizing 6 matrices, each index experiment required a total of 24 matrices. In each index experiment, the chip hybridizations were: (i) 6 hr attached vs. 6 hr released, and (ii) 24 hr attached vs. 24 hr released (i.e., two gene chips per index experiment). Each hybridization was done using a 10K spotted gene chip manufactured in the UNMC Microarray Core Facility. The index experiment was performed on three fibroblast strains, meaning that expressional data was derived from three foreskin donors (nonpooled samples). Dye-swap was not performed; dye assigned to attached vs. released remained constant among all chips. Since the index experiment was performed three times, the total number of gene chips used for this entire dataset was six.

Dataset Information

Response of collagen matrices under pressure and hydraulic resistance in hydrogels.

Publications

Response of collagen matrices under pressure and hydraulic resistance in hydrogels.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets