Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Highly Selective Turn-on and Reversible Fluorescent Chemosensor for Al³⁺ Detection Based on Novel Salicylidene Schiff Base-Terminated PEG in Pure Aqueous Solution.

ABSTRACT: The development of highly selective and sensitive chemosensors for Al³⁺ detection in pure aqueous solution is still a significant challenge. In this work, a novel water-soluble polymer PEGBAB based on salicylidene Schiff base has been designed and synthesized as a turn-on fluorescent chemosensor for the detection of Al³⁺ in 100% aqueous solution. PEGBAB exhibited high sensitivity and selectivity to Al³⁺ over other competitive metal ions with the detection limit as low as 4.05 × 10^-9 M. PEGBAB displayed high selectivity to Al³⁺ in the pH range of 5⁻10. The fluorescence response of PEGBAB to Al³⁺ was reversible in the presence of ethylenediaminetetraacetic acid (EDTA). Based on the fluorescence response, an INHIBIT logic gate was constructed with Al³⁺ and EDTA as two inputs. Moreover, test strips based on PEGBAB were fabricated facilely for convenient on-site detection of Al³⁺.

SUBMITTER: Bai L

PROVIDER: S-EPMC6523932 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A Highly Selective and Sensitive Fluorescent Chemosensor for Detecting Al3+ Ion in Aqueous Solution and Plant Systems.

Project description:The solubilized form of aluminum, Al3+, is present under acid soil conditions and toxic to both animals and plants. Detecting and quantifying Al3+ is vital for both chemistry and biology. A new Schiff-based fluorescent turn-on sensor (probe L) for the selective detection of the Al3+ ion was synthesized by coupling 2-hydroxy-1-naphthaldehyde and 2-aminoisoindoline-1,3-dione, and the structure was characterized by nuclear magnetic resonance spectra. The probe L exhibited an excellent selective and sensitive response to the Al3+ ion over other metal ions in DMSO-H₂O (1:9 v/v). Fluorescence quantification revealed that probe L was promising for the detection and accumulation of Al3+. Treating rice seedlings with Al3+ at 25⁻200 μM inhibited their growth. Al3+ treatment produced reactive oxygen species in rice roots. Practical applications of the fluorescent probe for the quantification of Al3+ in water samples and rice seedlings are demonstrated. Detecting the Al3+ ion with the probe L is easy and a potential alternative to existing analytical methods. The method can be used for detecting the Al3+ content of aqueous solution and plant systems. The novel fluorescent probe L has good potential for monitoring Al3+ content in the environment and biological systems.

| S-EPMC6387123 | biostudies-literature

A Reversible Colorimetric and Fluorescence "Turn-Off" Chemosensor for Detection of Cu2+ and Its Application in Living Cell Imaging.

Project description:Dual-function chemosensors that combine the capability of colorimetric and fluorimetric detection of Cu2+ are still relatively rare. Herein, we report that a 3-hydroxyflavone derivative (E)-2-(4-(dimethylamino)styryl)-3-hydroxy-4H-chromen-4-one (4), which is a red-emitting fluorophore, could serve as a reversible colorimetric and fluorescence "turn-off" chemosensor for the detection of Cu2+. Upon addition of Cu2+ to 4 in neutral aqueous solution, a dramatic color change from yellow to purple-red was clearly observed, and its fluorescence was markedly quenched, which was attributed to the complexation between the chemosensor and Cu2+. Conditions of the sensing process had been optimized, and the sensing studies were performed in a solution of ethanol/phosphate buffer saline (v/v = 3:7, pH = 7.0). The sensing system exhibited high selectivity towards Cu2+. The limit of naked eye detection of Cu2+ was determined at 8 × 10-6 mol/L, whereas the fluorescence titration experiment showed a detection limit at 5.7 × 10-7 mol/L. The complexation between 4 and Cu2+ was reversible, and the binding constant was found to be 3.2 × 104 M-1. Moreover, bioimaging experiments showed that 4 could penetrate the cell membrane and respond to the intracellular changes of Cu2+ within living cells, which indicated its potential for biological applications.

| S-EPMC6930558 | biostudies-literature

All-visible-light-driven salicylidene schiff-base-functionalized artificial molecular motors.

Project description:Light-driven rotary molecular motors are among the most promising classes of responsive molecular machines and take advantage of their intrinsic chirality which governs unidirectional rotation. As a consequence of their dynamic function, they receive considerable interest in the areas of supramolecular chemistry, asymmetric catalysis and responsive materials. Among the emerging classes of responsive photochromic molecules, multistate first-generation molecular motors driven by benign visible light remain unexplored, which limits the exploitation of the full potential of these mechanical light-powered systems. Herein, we describe a series of all-visible-light-driven first-generation molecular motors based on the salicylidene Schiff base functionality. Remarkable redshifts up to 100 nm in absorption are achieved compared to conventional first-generation motor structures. Taking advantage of all-visible-light-driven multistate motor scaffolds, adaptive behaviour is found as well, and potential application in multistate photoluminescence is demonstrated. These functional visible-light-responsive motors will likely stimulate the design and synthesis of more sophisticated nanomachinery with a myriad of future applications in powering dynamic systems.

| S-EPMC11291758 | biostudies-literature

Experimental and Theoretical Studies on a Simple S-S-Bridged Dimeric Schiff Base: Selective Chromo-Fluorogenic Chemosensor for Nanomolar Detection of Fe2+ & Al3+ Ions and Its Varied Applications.

Project description:A simple S-S (disulfide)-bridged dimeric Schiff base probe, L, has been designed, synthesized, and successfully characterized for the specific recognition of Al3+ and Fe2+ ions as fluorometric and colorimetric "turn-on" responses in a dimethylformamide (DMF)-H2O solvent mixture, respectively. The probe L and each metal ion bind through a 1:1 complex stoichiometry, and the plausible sensing mechanism is proposed based on the inhibition of the photoinduced electron transfer process (PET). The reversible chemosensor L showed high sensitivity toward Al3+ and Fe2+ ions, which was analyzed by fluorescence and UV-vis spectroscopy techniques up to nanomolar detection limits, 38.26 × 10-9 and 17.54 × 10-9 M, respectively. These experimental details were advocated by density functional theory (DFT) calculations. The practical utility of the chemosensor L was further demonstrated in electrochemical sensing, in vitro antimicrobial activity, molecular logic gate function, and quantification of the trace amount of Al3+ and Fe2+ ions in real water samples.

| S-EPMC7033979 | biostudies-literature

A Zinc(II) Schiff Base Complex as Fluorescent Chemosensor for the Selective and Sensitive Detection of Copper(II) in Aqueous Solution.

Project description:The development of chemosensors able to detect analytes in a variety of sample matrices through a low-cost, fast, and direct approach is of current interest in food, health, industrial, and environmental fields. This contribution presents a simple approach for the selective and sensitive detection of Cu2+ ions in aqueous solution based on a transmetalation process of a fluorescent substituted Zn(salmal) complex. Transmetalation is accompanied by relevant optical absorption changes and quenching of the fluorescence emission, leading to high selectivity and sensitivity of the chemosensor, with the advantage of not requiring any sample pretreatment or pH adjustment. Competitive experiments demonstrate a high selectivity of the chemosensor towards Cu2+ with respect to the most common metal cations as potential interferents. A limit of detection down to 0.20 μM and a dynamic linear range up to 40 μM are achieved from fluorometric data. By exploiting the fluorescence quenching upon formation of the copper(II) complex, simple paper-based sensor strips, visible to naked eyes under UV light, are used for the rapid, qualitative, and quantitative in situ detection of Cu2+ ions in aqueous solution over a wide concentration range, up to 10.0 mM, in specific environments, such as in industrial wastewater, where higher concentrations of Cu2+ ions can occur.

| S-EPMC10141078 | biostudies-literature

Reversible mechanofluorochromism of aniline-terminated phenylene ethynylenes.

Project description:Seven three-ring phenylene-ethynylene (PE) structural analogs, differing only in the lengths of alkyl chains on terminal aniline substituents, show 50-62 nm bathochromic shifts in emission maxima in response to mechanical force (mechanofluorochromism, MC). These shifts are fully reversible with heat or solvent fuming. Shearing of these solids yields a transition from green-emitting crystalline phases to orange-emitting amorphous phases as established by differential scanning calorimetry and X-ray diffraction. Molecules with shorter alkyl chain lengths required higher temperatures to recover the hypsochromically shifted crystalline phases after grinding, while the recovery with chain lengths longer than butyl occurred at room temperature. In addition to this structure-dependent thermochromism, these compounds retain their MC properties in polymer hosts to various extents. The crystalline phases of these materials have PE chromophores that are twisted due to non-covalent perfluoroarene-arene (ArF-ArH) interactions involving perfluorophenyl pendants and the terminal rings of the PE chromophore, resulting in interrupted conjugation and an absence of chromophore aggregation. The MC behavior of an analog without the perfluoroarene rings is severely attenuated. This work demonstrates the general utility of twisted PEs as stimuli-responsive moieties and reveals clear structure-property relationships regarding the effects of alkyl chain length on these materials.

| S-EPMC6009520 | biostudies-literature

Turn-on fluorescent chemosensor for Hg²? based on multivalent rhodamine ligands.

Project description:Rhodamine-based fluorescent chemosensors 1 and 2 exhibit selective fluorescence enhancement to Fe3+ and Hg2+ over other metal ions at 580 nm in CH(3)CN/H(2)O (3/1, v/v) solution. Bis(rhodamine) chemosensor 1, under optimized conditions (CH(3)CN/HEPES buffer (0.02 M, pH = 7.0) (95/5, v/v)), shows a high selectivity and sensitivity to Hg2+, with a linear working range of 0-50 ?M, a wide pH span of 4-10, and a detection limit of 0.4 ?M Hg2+.

| S-EPMC3546724 | biostudies-literature

A highly sensitive triazole-based perfectly water soluble novel bis-Schiff base reversible fluorescent-colorimetric chemosensor for fast detection of Pb<sup>2+</sup> ions.

Project description:A reversible fluorescent-colorimetric azino bis-Schiff base receptor for the detection of Pb2+ in aqueous medium has been developed for the first time. Receptor L exhibits an excellent selective and rapid fluorescent-colorimetric response towards Pb2+. The sensitivity of the fluorescent-based assay (0.53 nM) and colorimetric assay (1.0 nM) for Pb2+ is sufficiently good in comparison to previously reported literature. From 1H NMR data, Job plot measurement and the ESI-MS spectrum, a 1 : 2 stoichiometric complexation between L and Pb2+ has been established. Receptor L shows a remarkable detection ability in a wide pH range of 4-8 and it has been successfully utilised in the determination of Pb2+ in aqueous solution of bovine serum albumin protein and in real samples. The geometry of L has been optimized by both DFT studies and NMR, FTIR and mass spectra. Moreover, we have studied molecular docking of the probe L.

| S-EPMC10797601 | biostudies-literature

Reversal of a Fluorescent Fluoride Chemosensor from Turn-Off to Turn-On Based on Aggregation Induced Emission Properties.

Project description:Here we present a new approach for the development of fluoride chemosensors taking advantage of aggregation induced emission (AIE) properties. Although AIE-based chemosensors have been described, they rely primarily on the analyte causing aggregation and hence fluorescence. We propose a new concept in the use of AIE for the development of fluorescent sensors. Our hypothesis is based on the fact that a turn-off chemosensor in solution can be transformed into turn-on in the solid state if the properties of ACQ and AIE are properly combined between the fluorescent molecules involved. To demonstrate this hypothesis, we have selected a fluorescent chemosensor for the fluoride anion with a conjugated structure of bis(styryl)pyrimidine that, while showing turn-off behavior in solution, becomes turn-on when it is brought to the solid state. We have also combined it with the advantages of a detection system based on the microfluidic paper-based analytical devices (μPAD). The system is fully characterized spectroscopically both in solution and in the solid state, and quantum mechanical calculations were performed to explain how the sensor works. The prepared device presents a high sensitivity, with no interference and with an LoD and LoQ that allow determination of fluoride concentrations in water 2 orders of magnitude below the maximum allowed by WHO.

| S-EPMC8805153 | biostudies-literature

A Turn-On Fluorescent Chemosensor for Cyanide Ion Detection in Real Water Samples

Project description:We have designed and synthesized a novel simple colorimetric fluorescent probe with aggregation-induced emission (AIE) properties. Probe 5-(4-(diphenylamine)phenyl) thiophen-2-formaldehyde W exhibited a turn-on fluorescent response to cyanide ion (CN−), which induces distinct visual color changes. Probe W exhibited a highly selective and sensitive ratiometric fluorescence response for the detection of CN− over a wide pH range (4–11) and in the presence of common interferents. The linear detection of CN− over the concentration range of 4.00–38.00 µM (R2 = 0.9916, RSD = 0.02) was monitored by UV-Vis absorption spectrometry (UV-Vis) with the limit of detection determined to be 0.48 µM. The linear detection of CN− over the concentration range of 8.00–38.00 µM was examined by fluorescence spectrophotometry (R2 = 0.99086, RSD = 0.031), and the detection limit was found to be 68.00 nM. The sensing mechanisms were confirmed by 1H NMR spectroscopic titrations, X-ray crystallographic analysis, and HRMS. Importantly, probe W was found to show rapid response, high selectivity, and sensitivity for cyanide anions in real water samples, over the range of 100.17∼100.86% in artificial lake water and 100.54∼101.64% in running water by UV-Vis absorption spectrometry, and over the range of 99.42∼100.71% in artificial lake water and 100.59∼101.17% in running water by fluorescence spectrophotometry. Importantly, this work provides a simple and effective approach which uses an economically cheap and uncomplicated synthetic route for the selective, sensitive, and quantitative detection of CN− ions in systems relevant to the environment and health.

| S-EPMC9339681 | biostudies-literature