Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ionic Liquid Composite Polybenzimidazol Membranes for High Temperature PEMFC Applications.

ABSTRACT: A series of proton exchange membranes based on polybenzimidazole (PBI) were prepared using the low cost ionic liquids (ILs) derived from 1-butyl-3-methylimidazolium (BMIM) bearing different anions as conductive fillers in the polymeric matrix with the aim of enhancing the proton conductivity of PBI membranes. The composite membranes prepared by casting method (containing 5 wt. % of IL) exhibited good thermal, dimensional, mechanical, and oxidative stability for fuel cell applications. The effects of anion, temperature on the proton conductivity of phosphoric acid-doped membranes were systematically investigated by electrochemical impedance spectroscopy. The PBI composite membranes containing 1-butyl-3-methylimidazolium-derived ionic liquids exhibited high proton conductivity of 0.098 S·cm^-1 at 120 °C when tetrafluoroborate anion was present in the polymeric matrix. This conductivity enhancement might be attributed to the formed hydrogen-bond networks between the IL molecules and the phosphoric acid molecules distributed along the polymeric matrix.

SUBMITTER: Escorihuela J

PROVIDER: S-EPMC6523944 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Polyimide/Ionic Liquid Composite Membranes for Middle and High Temperature Fuel Cell Application: Water Sorption Behavior and Proton Conductivity.

Project description:Four water insoluble room-temperature protic ionic liquids (PILs) based on the N-alkylimidazolium cation with the alkyl chain length from 1 to 4 and bis(trifluoromethylsulfonyl)imide anion were synthesized and their chemical structure was confirmed by the 1H NMR and 19F NMR analysis. PILs were revealed to be thermally stable up to 360 and 400 °C. At the same time, the proton conductivity of PILs was found to be dependent mostly on the temperature and, to a less extent, on the type of the cation, i.e., the increase of the conductivity from ~3 × 10-4 S/cm at 25 °C to 2 × 10-2 S/cm at 150 °C was observed. The water vapour sorption capacity of PILs was evaluated as a function of relative humidity and the influence of the alkyl chain length on the phase behaviour in the PIL-water system was discussed. The composite polyimide/PILs membranes were prepared by the PIL immobilization in the porous polymer (Matrimid® 5218) film. The composite membranes showed a high level of proton conductivity (~10-3 S/cm) at elevated temperatures (up to 160 °C). The obtained results reveal that the elaborated composite polyimide/PIL membranes are promising candidates for the application as proton exchange membrane at middle and high temperatures.

| S-EPMC7281338 | biostudies-literature

Cellulose-graphene quantum dot composite membranes using ionic liquid.

Project description:Selective separation of small molecules by membranes is inhibited by the performance gap between nanofiltration and ultrafiltration membranes. In this work, a membrane that can efficiently remove small molecules (> 300 Da) was created by incorporating graphene oxide quantum dots (GQDs) into a cellulose membrane using an ionic liquid (1-ethyl-3-methylimidazolium acetate). Incorporation of GQD into cellulose membranes using an ionic liquid brings several advantages over traditional mixed matrix membranes: 1) GQDs are abundant in peripheral hydroxyl and carboxyl groups, thus GQDs have strong binding with cellulose through hydrogen bonding and forms a stable composite membrane. 2) Negative surface charge of GQDs helps prevent aggregation. 3) The size (5 nm) of GQD is smaller than most nanoparticles used in membranes, allowing for interesting pore forming properties. GQD-cellulose membranes were prepared by non-solvent induced phase separation in water. It was determined that about 45% of GQDs are incorporated from solution to membrane. GQDs were determined to be located on the membrane surface, giving the membrane negative surface charge and improved hydrophilicity. GQDs showed no leaching after convective flow through the membrane. Impact of GQD on membrane permeability and rejection was studied through convective flow experiments, and through longer term permeability studies.

| S-EPMC7039517 | biostudies-literature

Composite Structural Supercapacitors: High-Performance Carbon Nanotube Supercapacitors through Ionic Liquid Localisation.

Project description:Composite structural supercapacitors (SSC) are an attractive technology for aerospace vehicles; however, maintaining strength whilst adding energy storage to composite structures has been difficult. Here, SSCs were manufactured using aerospace-grade composite materials and CNT mat electrodes. A new design methodology was explored where the supercapacitor electrolyte was localised within the composite structure, achieving good electrochemical performance within the active region, whilst maintaining excellent mechanical performance elsewhere. The morphologies of these localised SSC designs were characterised with synchrotron X-ray fluorescence microscopy and synchrotron X-ray micro-computed tomography and could be directly correlated with both electrochemical and mechanical performance. One configuration used an ionogel with an ionic liquid (IL) electrolyte, which assisted localisation and achieved 2640 mW h kg-1 at 8.37 W kg-1 with a corresponding short beam shear (SBS) strength of 71.5 MPa in the active area. A separate configuration with only IL electrolyte achieved 758 mW h kg-1 at 7.87 W kg-1 with SBS strength of 106 MPa in the active area. Both configurations provide a combined energy and strength superior to results previously reported in the literature for composite SSCs.

| S-EPMC9330893 | biostudies-literature

Determination of pyrethroid residues in herbal tea using temperature-controlled ionic liquid dispersive liquid-liquid microextraction by high performance liquid chromatography.

Project description:A simple and effective method for determining five pyrethroid residues in herbal tea by ultrasound-enhanced temperature-controlled (UETC) ionic liquid dispersive liquid-liquid microextraction (IL-DLLME) coupled with high performance liquid chromatography-diode array detection (HPLC-DAD) was developed. The use of ultrasonication and heating improved the ability of the ionic liquid to extract the analytes. Various parameters that affect the extraction efficiency were investigated and optimized using single factor experiments and response surface design. The optimum conditions of the experiment were 121?µL of [HMIM][PF6] (extraction solvent), 794?µL of acetonitrile (dispersive solvent), a heating temperature of 40°C, a sonication time of 3.6?min and a pH of 2.9. Under optimized conditions, the linearity was in the range of 0.05-5?mg?L-1 with correlation coefficients above 0.9993. The limits of detection and quantification were 1.25-1.35?µg?L-1 and 5?µg?L-1, respectively. The mean recoveries of the five pyrethroids ranged from 74.02% to 109.01%, with RSDs below 9.04%. The proposed method was reliable for the analysis of pyrethroids in Chinese herbal tea.

| S-EPMC7070011 | biostudies-literature

Oriented MOF-polymer composite nanofiber membranes for high proton conductivity at high temperature and anhydrous condition.

Project description:The novel oriented electrospun nanofiber membrane composed of MOFs and SPPESK has been synthesized for proton exchange membrane fuel cell operating at high temperature and anhydrous conditions. It is clear that the oriented nanofiber membrane displays the higher proton conductivity than that of the disordered nanofiber membrane or the membrane prepared by conventional solvent-casting method (without nanofibers). Nanofibers within the membranes are significantly oriented. The proton conductivity of the oriented nanofiber membrane can reach up to (8.2 ± 0.16) × 10(-2) S cm(-1) at 160°C under anhydrous condition for the highly orientation of nanofibers. Moreover, the oxidative stability and resistance of methanol permeability of the nanofibers membrane are obviously improved with an increase in orientation of nanofibers. The observed methanol permeability of 0.707 × 10(-7) cm(2) s(-1) is about 6% of Nafion-115. Consequently, orientated nanofibers membrane is proved to be a promising material as the proton exchange membrane for potential application in direct methanol fuel cells.

| S-EPMC4118289 | biostudies-literature

Graphene/Ionic liquid composite films and ion exchange.

Project description:Wettability of graphene is adjusted by the formation of various ionic surfaces combining ionic liquid (IL) self-assembly with ion exchange. The functionalized ILs were designed and synthesized with the goal of obtaining adjustable wettability. The wettability of the graphene surface bearing various anions was measured systematically. The effect of solvent systems on ion exchange ratios on the graphene surface has also been investigated. Meanwhile, the mechanical properties of the graphene/IL composite films were investigated on a nanometer scale. The elasticity and adhesion behavior of the thin film was determined with respected to the indentation deformation by colloid probe nanoindentation method. The results indicate that anions played an important role in determining graphene/IL composite film properties. In addition, surface wetting and mechanics can be quantitatively determined according to the counter-anions on the surface. This study might suggest an alternate way for quantity detection of surface ions by surface force.

| S-EPMC4073168 | biostudies-other

Robust High-performance Dye-sensitized Solar Cells Based on Ionic Liquid-sulfolane Composite Electrolytes.

Project description:Novel ionic liquid-sulfolane composite electrolytes based on the 1,2,3-triazolium family of ionic liquids were developed for dye-sensitized solar cells. The best performing device exhibited a short-circuit current density of 13.4 mA cm(-2), an open-circuit voltage of 713 mV and a fill factor of 0.65, corresponding to an overall power conversion efficiency (PCE) of 6.3%. In addition, these devices are highly stable, retaining more than 95% of the initial device PCE after 1000 hours of light- and heat-stress. These composite electrolytes show great promise for industrial application as they allow for a 14.5% improvement in PCE, compared to the solvent-free eutectic ionic liquid electrolyte system, without compromising device stability.

| S-EPMC4680969 | biostudies-other

Poly(ionic liquid) Based Composite Electrolytes for Lithium Ion Batteries.

Project description:Polymerized ionic liquids (PIL) are an interesting substance class, which is discussed to transfer the outstanding properties and tunability of ionic liquids into a solid material. In this study we extend our previous research on ammonium based PIL and discuss the influence of additives and their usability as polymer electrolyte membranes for lithium ion batteries. The polymer electrolyte is thereby used as replacement for the commercially widespread system of a separator that is soaked with liquid electrolyte. The influence of the material composition on the ionic conductivity (via electrochemical impedance spectroscopy) and the diffusion coefficients (via pulsed-field-gradient nuclear magnetic resonance spectroscopy) were studied and cell tests with adapted membrane materials were performed. High amounts of the additional ionic liquid (IL) MPPyrr-TFSI (1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide) increased the ionic conductivity of the materials up to 1.3·10-4 S·cm-1 but made the usage of a cross-linker necessary to obtain mechanically stable membranes. The application of liquid electrolyte mixtures with ethylene carbonate (EC) and MPPyrr-TFSI decreased ionic conductivity values down to the 10-9 S·cm-1 range, but increased 7Li diffusion coefficients with increasing amounts of EC up to 1.7·10-10 m2·s-1. Cell tests with two membrane mixtures proofed that it is possible to build electrolyte membranes on basis of the polymerized ionic liquids, but also showed that further research is necessary to ensure stable and efficient cell cycling.

| S-EPMC8707941 | biostudies-literature

Low temperature ionic conductor: ionic liquid incorporated within a metal-organic framework.

Project description:Ionic liquids (ILs) show promise as safe electrolytes for electrochemical devices. However, the conductivity of ILs decreases markedly at low temperatures because of strong interactions arising between the component ions. Metal-organic frameworks (MOFs) are appropriate microporous host materials that can control the dynamics of ILs via the nanosizing of ILs and tunable interactions of MOFs with the guest ILs. Here, for the first time, we report on the ionic conductivity of an IL incorporated within a MOF. The system studied consisted of EMI-TFSA (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide) and ZIF-8 (Zn(MeIM)2, H(MeIM) = 2-methylimidazole) as the IL and the MOF, respectively. While the ionic conductivity of bulk EMI-TFSA showed a sharp decrease arising from freezing, the EMI-TFSA@ZIF-8 showed no marked decrease because there was no phase transition. The ionic conductivity of EMI-TFSA@ZIF-8 was higher than that of bulk EMI-TFSA below 250 K. This result points towards a novel method by which to design electrolytes for electrochemical devices such as batteries that can operate at low temperatures.

| S-EPMC5707510 | biostudies-literature

Novel Phosphonium-Based Ionic Liquid Electrolytes for Battery Applications.

Project description:In this study, we address the fundamental question of the physicochemical and electrochemical properties of phosphonium-based ionic liquids containing the counter-ions bis(trifluoromethanesulfonyl)imide ([TFSI]-) and bis(fluorosulfonyl)imide ([FSI]-). To clarify these structure-property as well as structure-activity relationships, trimethyl-based alkyl- and ether-containing phosphonium ILs were systematically synthesized, and their properties, namely density, flow characteristics, alkali metal compatibility, oxidative stability, aluminum corrosivity as well as their use in Li-ion cells were examined comprehensively. The variable moiety on the phosphonium cation exhibited a chain length of four and five, respectively. The properties were discussed as a function of the side chain, counter-ion and salt addition ([Li][TFSI] or [Li][FSI]). High stability coupled with good flow characteristics were found for the phosphonium IL [P1114][TFSI] and the mixture [P1114][TFSI] + [Li][TFSI], respectively.

| S-EPMC9329924 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data