Dataset Information

Uniform 3D meshes to establish normative facial averages of healthy infants during the first year of life.

ABSTRACT: Three-dimensional (3D) surface imaging systems are replacing direct anthropometry as the preferred method for capturing facial soft-tissues. Aims of this study were: (1) to develop normative average 3D faces of healthy infants aged 3, 6, 9, and 12 months and (2) to describe normative average 3D facial growth data in infants aged 3 to 12 months. Three-dimensional images of 50 healthy children were acquired at 3, 6, 9, and 12 months of age using the 3dMDcranial system. Four average faces with uniform meshes (3, 6, 9, and 12 months) were developed and registered based on the children's reference frames. Distance maps of growth of the total facial surface and of the nose, upper lip, chin, forehead and cheeks for the intervals 3 to 6 months, 6 to 9 months, and 9 to 12 months of age were calculated. Mean growth of the total facial surface was 3.9 mm (standard deviation [SD] 1.2 mm), 3.5 mm (SD 0.9 mm), and 1.6 mm (SD 0.7 mm) at 3 to 6 months, 6 to 9 months, and 9 to 12 months, respectively. Regarding the selected regions of the face, the mean growth of the nose and upper lip were the largest (3.7 mm and 3.6 mm, respectively) between 6 and 9 months of age. The mean growth of the forehead, cheeks and chin were the largest (5.4 mm, 3.2, and 4.7 mm, respectively) between 3 and 6 months of age. For all facial regions, growth clearly diminished from 9 to 12 months of age. Normative data on the growth of the full face, nose, upper lip, chin, forehead and cheeks are presented. Such data can be used in future studies to identify the effectiveness of treatment of orofacial deformities such as orofacial clefts during the first year of life.

SUBMITTER: Brons S

PROVIDER: S-EPMC6527206 | biostudies-literature | 2019

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Uniform 3D meshes to establish normative facial averages of healthy infants during the first year of life.

Brons Sander S Meulstee Jene W JW Nada Rania M RM Kuijpers Mette A R MAR Bronkhorst Ewald M EM Bergé Stefaan J SJ Maal Thomas J J TJJ Kuijpers-Jagtman Anne Marie AM

PloS one 20190520 5

Three-dimensional (3D) surface imaging systems are replacing direct anthropometry as the preferred method for capturing facial soft-tissues. Aims of this study were: (1) to develop normative average 3D faces of healthy infants aged 3, 6, 9, and 12 months and (2) to describe normative average 3D facial growth data in infants aged 3 to 12 months. Three-dimensional images of 50 healthy children were acquired at 3, 6, 9, and 12 months of age using the 3dMDcranial system. Four average faces with unif ...[more]

PMID: 31107914

Similar Datasets

Project description:This paper describes and presents a stable and reliable set of stereo-photogrammetric normative data for global and spino-pelvic sagittal alignment, as a proven reference system for evaluating/measuring a fully unconstrained natural upright neutral standing attitude in a young healthy adult population. The methodological features described in this article will enable future studies to replicate and/or directly compare a wide range of different postural tests and/or sagittal alignment assessment procedures including the study of sagittal spine shape variations occurring during gait performance. To date, the quantitative evaluation of adult spinal deformity (ASD) has been mainly confined to the X-ray imaging approach and, more recently, to 3D X-ray reconstruction. Within the existing evaluation framework an opportunity exists for an additional approach: a quantitative evaluation procedure which is easy, accurate, relatively speedy and non-ionising, in order to monitor and track the progress of patients in the areas of both surgical and non-surgical treatment. The resources and methodology described in this paper have been proven to meet all these criteria. They have enabled full 3D posture (including 3D spine shape and sagittal alignment of the skeleton) to be consistently and successfully measured in adult volunteers. All the measurement/evaluation procedures and outcomes carried out were based entirely on the new non-ionising 3D opto-electronic stereo-photogrammetric approach described in this article. The protocol for this methodology was based on a standard set of 27 pre-selected anatomical "landmarks" on the human body, providing standard reference points for observation and measurement. A total of 124 healthy subjects were successfully assessed and, for each subject, 27 individual markers were applied to the corresponding locations on his/her body. Statistical tests to investigate gender differences were also carried out. Descriptive statistics are provided for all 15 of the spino-pelvic parameters under consideration. Results indicated significant differences between genders in five sets of parameters: Kyphosis tilt, Head tilt, Pelvic tilt, Spino-pelvic angle and T1-pelvic angle. The data also demonstrate a high degree of congruity with results obtained using the X-ray method, as evidenced by the existing literature in the field. In summary, the current study presents a new stereo-photogrammetric opto-electronic technology which can be used successfully for ASD evaluation and introduces a comprehensive set of normative data analogous to those proposed in X-ray analysis for sagittal spino-pelvic and total body alignment.

Project description:DesignObservational cross-sectional study. The current study aims to yield normative data: i.e., the physiological standard for 30 selected quantitative 3D parameters that accurately capture and describe a full-skeleton, upright-standing attitude. Specific and exclusive consideration was given to three distinct categories: postural, spine morphology and pelvic parameters. To capture such 3D parameters, the authors selected a non-ionising 3D opto-electronic stereo-photogrammetric approach. This required the identification and measurement of 27 body landmarks, each specifically tagged with a skin marker. As subjects for the measurement of these parameters, a cohort of 124 asymptomatic young adult volunteers was recruited. All parameters were identified and measured within this group. Postural and spine morphology data have been compared between genders. In this regard, only five statistically significant differences were found: pelvis width, pelvis torsion, the "lumbar" lordosis angle value, the lumbar curve length, and the T12-L5 anatomically-bound lumbar angle value. The "thoracic" kyphosis mean angle value was the same in both sexes and, even if, derived from skin markers placed on spinous processes it resulted in perfect agreement with the X-ray based literature. As regards lordosis, a direct comparison was more difficult because methods proposed in the literature differ as to the number and position of vertebrae under consideration, and their related angle values. However, when the L1 superior-L5 inferior end plate Cobb angle was considered, these results aligned strongly with the existing literature. Asymmetry was a standard postural-spinal feature for both sexes. Each subject presented some degree of leg length discrepancy (LLD) with μ = 9.37mm. This was associated with four factors: unbalanced posture and/or underfoot loads, spinal curvature in the frontal plane, and pelvis torsion. This led to the additional study of the effect of LLD equalisation influence on upright posture, relying on a sub-sample of 100 subjects (51 males, 49 females). As a result of the equalisation, about 82% of this sub-sample showed improvement in standing posture, mainly in the frontal plane; while in the sagittal plane less than 1/3 of the sub-sample showed evidence of change in spinal angles. A significant variation was found in relation to pelvis torsion: 46% of subjects showed improvement, 49% worsening. The method described in study presents several advantages: non-invasive aspect; relatively short time for a complete postural evaluation with many clinically useful 3D and 2D anatomical/biomechanical/clinical parameters; analysis of real neutral unconstrained upright standing posture.

Dataset Information

Uniform 3D meshes to establish normative facial averages of healthy infants during the first year of life.

Publications

Uniform 3D meshes to establish normative facial averages of healthy infants during the first year of life.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets