Passive cervical spine ligaments provide stability during head impacts.
Ontology highlight
ABSTRACT:
SUBMITTER: Kuo C
PROVIDER: S-EPMC6544890 | biostudies-literature | 2019 May
REPOSITORIES: biostudies-literature
Publications
Passive cervical spine ligaments provide stability during head impacts.
Kuo Calvin C Sheffels Jodie J Fanton Michael M Yu Ina Bianca IB Hamalainen Rosa R Camarillo David D
Journal of the Royal Society, Interface 20190529 154
It has been suggested that neck muscle strength and anticipatory cocontraction can decrease head motions during head impacts. Here, we quantify the relative angular impulse contributions of neck soft tissue to head stabilization using an OpenSim musculoskeletal model with Hill-type muscles and rate-dependent ligaments. We simulated sagittal extension and lateral flexion mild experimental head impacts performed on 10 subjects with relaxed or cocontracted muscles, and median American football head ...[more]
Similar Datasets
Project description:ObjectiveThe aim of this study was to measure the movement of the cervical spine in healthy volunteers and patients with cervical spondylosis (CS) and describe the actual motion of the cervical spine using a three-dimensional (3D) CT reconstruction method. The results can enrich current biomechanical data of cervical spine and help to find the differences between the noted two groups.Materials and methods20 healthy volunteers underwent CT examination ranging from the clivus of the occiput (Oc) to the top of first thoracic vertebrae (T1) in a neutral position with left or right maximal axial rotation, while 26 CS patients received the same CT scan procedures in the neutral position with left and right maximum rotation. Subsequently, the three-dimensional images of the occiput and every cervical vertebrae (C1-C7) were reconstructed using medical software. 3 virtual non-collinear markers were placed on the prominent structures of foramen magnum and every cervical vertebrae. Then, the 3D orthogonal spatial coordinates were defined with these anatomical markers to represent the orientation and position of every vertebra. Segmental relative motions were calculated using Cardan angles in the 3D spatial coordinates. Finally, the differences between the two groups were analyzed with statistical software SPSS.ResultsThe cervical spine exhibited complicated 3D movements, which could be adequately described using the three-dimensional CT reconstruction method. Reliability analysis of the 3D CT reconstruction method showed inter-rater ICC of 0.90-0.99 and intra-rater ICC of 0.91-0.98, suggesting very good consistency. Besides, the rotation at the upper cervical spine (Oc-C2) took up at least 60% of the total cervical rotation. The coupled lateral bending movement of the upper cervical spine was opposite to the major motion, while the movement of the lower cervical spine followed the same direction as that of the major motion. Oc to C5 segments were all coupled with the back-extension movement. The relative translations of all adjacent segments in each direction were minimal. CS patients showed a significant decrease in the movement of the C4-C5 segment compared with healthy volunteers.ConclusionThe motion of the cervical spine was complicated and three-dimensional. The CT reconstruction method employed here was good at describing such movement. The 3D CT reconstruction method exhibited high reproducibility when measuring cervical spine movement. CS patients and healthy volunteers showed significant differences in the movement of some segments.
| S-EPMC6467451 | biostudies-literature
Project description:ContextThe motion of the upper cervical spine (UCS) has a great interest for analyzing the biomechanical features of this joint complex, especially in case of instability. Although investigators have analyzed numerous kinematics and musculoskeletal characteristics, there are still little data available regarding several suboccipital ligaments such as occipito-atlantal, atlantoaxial, and cruciform ligaments.ObjectiveThe aim of this study is to quantify the length and moment arm magnitudes of suboccipital ligaments and to integrate data into specific 3D-model, including musculoskeletal and motion representation.Materials and methodsBased on a recent method, suboccipital ligaments were identified using UCS anatomical modeling. Biomechanical characteristics of these anatomical structures were assessed for sagittal and transversal displacements regarding length and moment arm alterations.ResultsOutcomes data indicated length alterations >25% for occipito-atlantal, atlanto-axial and apical ligaments. The length alteration of unique ligaments was negligible. Length variation was dependent on the motion direction considered. Regarding moment arm, larger magnitudes were observed for posterior ligaments, and consistent alteration was depicted for these structures.ConclusionThese outcomes supply relevant biomechanical characteristics of the UCS ligaments in flexion-extension and axial rotation by quantifying length and moment arm magnitude. Moreover, 3D anatomical modeling and motion representation can help in the process of understanding of musculoskeletal behaviors of the craniovertebral junction.
| S-EPMC7546058 | biostudies-literature
Project description:BackgroundBlunt cerebrovascular injuries (BCVIs) and cervical spinal injuries (CSIs) are not uncommon injuries in patients with severe head injury and may affect patient recovery. We aimed to assess the independent relationship between BCVI, CSI, and outcome in patients with severe head injury.MethodsWe identified patients with severe head injury from the Helsinki Trauma Registry treated during 2015-2017 in a large level 1 trauma hospital. We assessed the association between BCVI and SCI using multivariable logistic regression, adjusting for injury severity. Our primary outcome was functional outcome at 6 months, and our secondary outcome was 6-month mortality.ResultsOf 255 patients with a cervical spine CT, 26 patients (10%) had a CSI, and of 194 patients with cervical CT angiography, 16 patients (8%) had a BCVI. Four of the 16 BCVI patients had a BCVI-related brain infarction, and four of the CSI patients had some form of spinal cord injury. After adjusting for injury severity in multivariable logistic regression analysis, BCVI associated with poor functional outcome (odds ratio [OR]?=?6.0, 95% CI [confidence intervals]?=?1.4-26.5) and mortality (OR?=?7.9, 95% CI 2.0-31.4). We did not find any association between CSI and outcome.ConclusionsWe found that BCVI with concomitant head injury was an independent predictor of poor outcome in patients with severe head injury, but we found no association between CSI and outcome after severe head injury. Whether the association between BCVI and poor outcome is an indirect marker of a more severe injury or a result of treatment needs further investigations.
| S-EPMC7235059 | biostudies-literature
Project description:We sought to determine whether the dynamic visual acuity (DVA) test, which has been used to measure the function of the two horizontal semicircular canals (SCCs), could be adapted to measure the individual function of all six SCCs using transient, rapid, unpredictable head rotation stimuli (head thrusts) in the direction of maximum sensitivity of each SCC. We examined head-thrust DVA (htDVA) performance in 19 healthy control subjects, five patients before and six patients after plugging of one superior SCC for treatment of superior canal dehiscence, and two subjects with unilateral vestibular deafferentation (UVD) by vestibular neurectomy. We compared htDVA results for each SCC to vestibulo-ocular reflex gains measured using 3-D scleral coil recordings during a passive head-thrust-test paradigm. Individuals with normal vestibular function had similar htDVA scores for each of the six directions (canals) tested (mean 0.058 +/- 0.050 LogMAR). Individuals tested after surgical plugging of one superior SCC were similar to normal for all SCCs except the plugged SCC, which had significantly worse htDVA scores (mean 0.270 +/- 0.08 LogMAR). Individuals with UVD had significantly worse htDVA scores for head rotations maximally exciting any of the ipsilesional SCC (mean 0.317 +/- 0.129 LogMAR) and scores similar to normal subjects for contralesional rotations (0.063 +/- 0.051 LogMAR). These findings suggest that the htDVA test, which does not require scleral coil placement, magnetic field coils, or expensive oculography equipment, can provide a useful quantitative measure of individual SCC function.
| S-EPMC2504635 | biostudies-other
Project description:A precise and comprehensive definition of "normal" in vivo cervical kinematics does not exist due to high intersubject variability and the absence of midrange kinematic data. In vitro test protocols and finite element models that are validated using only end range of motion data may not accurately reproduce continuous in vivo motion.The primary objective of this study was to precisely quantify cervical spine intervertebral kinematics during continuous, functional flexion-extension in asymptomatic subjects. The advantages of assessing continuous intervertebral kinematics were demonstrated by comparing asymptomatic controls with patients with single-level anterior arthrodesis.Cervical spine kinematics were determined during continuous in vivo flexion-extension in a clinically relevant age group of asymptomatic controls and a group of patients with C5-C6 arthrodesis.The patient sample consisted of 6 patients with single-level (C5-C6) anterior arthrodesis (average age: 48.8±6.9 years; 1 male, 5 female; 7.6±1.2 months postsurgery) and 18 asymptomatic control subjects of similar age (average age: 45.6±5.8 years; 5 male, 13 female).Outcome measures included the physiologic measure of continuous kinematic motion paths at each cervical motion segment (C2-C7) during flexion-extension.Participants performed flexion-extension while biplane radiographs were collected at 30 images per second. A previously validated tracking process determined three-dimensional vertebral positions with submillimeter accuracy. Continuous flexion-extension rotation and anterior-posterior translation motion paths were adjusted for disc height and static orientation of each corresponding motion segment.Intersubject variability in flexion-extension angle was decreased 15% to 46% and intersubject variability in anterior-posterior translation was reduced 14% to 33% after adjusting for disc height and static orientation angle. Average intersubject variability in continuous motion paths was 1.9° in flexion-extension and 0.6 mm in translation. Third-order polynomial equations were determined to precisely describe the continuous flexion-extension and anterior-posterior translation motion path at each motion segment (all R2>0.99).A significant portion of the intersubject variability in cervical kinematics can be explained by the disc height and the static orientation of each motion segment. Clinically relevant information may be gained by assessing intervertebral kinematics during continuous functional movement rather than at static, end range of motion positions. The fidelity of in vitro cervical spine mechanical testing protocols may be evaluated by comparing in vitro kinematics to the continuous motion paths presented.
| S-EPMC4013269 | biostudies-literature
Project description:Body weight support (BWS) systems are a common tool used in gait rehabilitation. BWS systems may alter the requirements for an individual to actively stabilize by 1) providing lateral restoring forces that reduce the requirements for the nervous system to actively stabilize and 2) decreasing the stabilizing gravitational moment in the frontal plane, which could increase the requirements to actively stabilize. The goal of the current study was to quantify the interaction between BWS and lateral stability. We hypothesized that when able-bodied people walk with BWS: 1) the lateral restoring forces provided by BWS would reduce the requirements to stabilize in the frontal plane when comparing dynamically similar gaits, and 2) increasing BWS would decrease the stabilizing gravitational moment in the frontal plane and increase the requirements to stabilize when speed is constrained. Our findings partly support these hypotheses, but indicate a complex interaction between BWS and lateral stability. With BWS, subjects significantly decreased step width variability and significantly increased step width (p<0.05) for both the dynamically similar and Speed-Matched conditions. The decrease in step width variability may be attributable to a combination of lateral restoring forces decreasing the mechanical requirements to stabilize and an enhanced sense of position that could have improved locomotor control. Increases in step width when walking with high levels of BWS could have been due to decreases in the gravitational moment about the stance limb, which may challenge the control of stability in multiple planes.
| S-EPMC5056129 | biostudies-other
Project description:BackgroundTrapeziometacarpal (TMC) arthritis of the thumb is a common source of hand pain and disability. TMC ligamentous instability may play a role in TMC degeneration. However, the relative importance of the TMC ligaments in the etiology of degeneration and the use of surgery to treat instability in early-stage arthritis are unclear.Questions/purposesIn this review, we addressed several questions: (1) What are the primary ligamentous stabilizers of the thumb TMC joint? (2) What is the evidence for ligament reconstruction or ligament imbrication in the treatment of thumb TMC joint osteoarthritis? And (3) what is the evidence for thumb metacarpal osteotomy in the treatment of thumb TMC joint osteoarthritis?MethodsWe performed a systematic review of the literature using PubMed (MEDLINE(®)) and Scopus(®) (EMBASE(®)) for peer-reviewed articles published until November 2012. Fifty-two studies fit the inclusion criteria. Twenty-four studies were anatomic, biomechanical, or histopathologic studies on TMC joint ligamentous anatomy, 16 studies were clinical studies concerning ligament reconstruction, and 12 studies were clinical studies on thumb metacarpal osteotomy.ResultsOver the past two decades, increasing evidence suggests the dorsoradial ligament is the most important stabilizer of the TMC joint. Other ligaments consistently identified are the superficial anterior oblique, deep anterior oblique, intermetacarpal, ulnar collateral, and posterior oblique ligaments. Ligament reconstruction and metacarpal osteotomy relieve pain and improve grip strength based on Level IV studies.ConclusionsThe dorsal ligaments are the primary stabilizers of the TMC joint. Ligament reconstruction and metacarpal osteotomy ameliorate ligamentous laxity and relieve pain based on Level IV studies.
| S-EPMC3940731 | biostudies-literature
Project description:BackgroundWhile appropriate pillow height is crucial to maintaining the quality of sleep and overall health, there are no universal, evidence-based guidelines for pillow design or selection. We aimed to evaluate the effect of pillow height on cranio-cervical pressure and cervical spine alignment.MethodsTen healthy subjects (five males) aged 26 ± 3.6 years were recruited. The average height, weight, and neck length were 167 ± 9.3 cm, 59.6 ± 11.9 kg, and 12.9 ± 1.2 cm respectively. The subjects lay on pillows of four different heights (H0, 110 mm; H1, 130 mm; H2, 150 mm; and H3, 170 mm). The cranio-cervical pressure distribution over the pillow was recorded; the peak and average pressures for each pillow height were compared by one-way ANOVA with repeated measures. Cervical spine alignment was studied using a finite element model constructed based on data from the Visible Human Project. The coordinate of the center of each cervical vertebra were predicted for each pillow height. Three spine alignment parameters (cervical angle, lordosis distance and kyphosis distance) were identified.ResultsThe average cranial pressure at pillow height H3 was approximately 30% higher than that at H0, and significantly different from those at H1 and H2 (p < 0.05). The average cervical pressure at pillow height H0 was 65% lower than that at H3, and significantly different from those at H1 and H2 (p < 0.05). The peak cervical pressures at pillow heights H2 and H3 were significantly different from that at H0 (p < 0.05). With respect to cervical spine alignment, raising pillow height from H0 to H3 caused an increase of 66.4% and 25.1% in cervical angle and lordosis distance, respectively, and a reduction of 43.4% in kyphosis distance.DiscussionPillow height elevation significantly increased the average and peak pressures of the cranial and cervical regions, and increased the extension and lordosis of the cervical spine. The cranio-cervical pressures and cervical spine alignment were height-specific, and they were believed to reflect quality of sleep. Our results provide a quantitative and objective evaluation of the effect of pillow height on the biomechanics of the head-neck complex, and have application in pillow design and selection.
| S-EPMC5012320 | biostudies-literature
Project description:BackgroundBicyclists are vulnerable road users. The aim of this paper was to describe all bicycle-related traumatic cervical spine injuries (CSIs) in the South-East region of Norway (2015-2019), and to investigate whether certain types of CSIs are typical for bicyclists.MethodsRetrospective cohort study of prospectively collected registry data of all CSIs in the South-East region of Norway (3.0 million inhabitants), from 2015 to 2019. Patient characteristics, injury types, and treatment were summarized with descriptive statistics. Bayesian multivariable logistic regression was used to identify potential factors associated with occipital condyle fractures (OC-Fx) or odontoid fractures (OFx).ResultsDuring the five-year study period, 2,162 patients with CSIs were registered, and 261 (12%) were bicycle-related. The incidence of bicycle-related CSIs was 1.7/100,000 person-years. The median age of the patients with bicycle-related CSIs was 55 (IQR: 22) years, 83% were male, 71% used a helmet, 16% were influenced by ethanol, 12% had a concomitant cervical spinal cord injury (SCI), and 64% sustained multiple traumas. The three most common bicycle-related CSIs were C6/C7 fracture (Fx) (28%), occipital condyle Fx (OC-Fx) (23%) and C5/C6 Fx (19%). Patients with bicycle-related CSIs compared to patients with non-bicycle related CSIs were younger, more often male, had fewer comorbidities, more likely multiple traumas, more often had OC-Fx, and less often sustained an odontoid fracture (OFx). Multivariable logistic regression of potential risk factors for OC-Fx demonstrated a significantly increased risk of OC-Fx for bicyclists compared to non-bicyclists (OR=2.8).The primary treatment for bicycle-related CSIs was external immobilization in 187/261 (71.6%) cases, open surgical fixation in 44/261 (16.8%), and no treatment in 30/261 (11.5%).ConclusionBicycle crashes are a frequent cause of CSIs in the Norwegian population and should be of concern to the public society. The three most common bicycle-related CSIs were C6/C7 fracture, occipital condyle fracture and C5/C6 fracture.
| S-EPMC9108519 | biostudies-literature
Project description:BackgroundThe lateral ankle ligament complex consisting of the anterior talofibular ligament (ATFL), the calcaneofibular ligament (CFL) and the posterior talofibular ligament (PTFL) is known to provide stability against ankle joint inversion. As injuries of the ankle joint have been reported at a wide range of plantarflexion/dorsiflexion angles, the aim of the present study was to evaluate the stabilizing function of these ligaments depending on the sagittal plane positioning of the ankle joint.MethodsEight fresh-frozen specimens were tested on a custom-built ankle deflection tester allowing the application of inversion torques in various plantarflexion/dorsiflexion positions. A motion capture system recorded kinematic data from the talus, calcaneus and fibula with bone-pin markers during inversion movements at 10° of dorsiflexion, at neutral position and at plantarflexion 10°. ATFL, CFL and PTFL were separately but sequentially sectioned in order to assess the contribution of the individual ligament with regard to ankle joint stability.ResultsJoint- and position-specific modulations could be observed when the ligaments were cut. Cutting the ATFL did not lead to any observable alterations in ankle inversion angle at a given torque. But subsequently cutting the CFL increased the inversion angle of the talocrural joint in the 10° plantarflexed position, and significantly increased the inversion angle of the subtalar joint in the 10° dorsiflexed position. Sectioning of the PTFL led to minor increases of inversion angles in both joints.ConclusionsThe CFL is the primary ligamentous stabilizer of the ankle joint against a forced inversion. Its functioning depends greatly on the plantar-/dorsiflexion position of the ankle joint complex, as it provides the stability of the talocrural joint primarily during plantarflexion and the stability of the subtalar joint primarily during dorsiflexion.
| S-EPMC6421682 | biostudies-literature