Dataset Information

A Review: Photonic Devices Used for Dosimetry in Medical Radiation.

ABSTRACT: Numerous instruments such as ionization chambers, hand-held and pocket dosimeters of various types, film badges, thermoluminescent dosimeters (TLDs) and optically stimulated luminescence dosimeters (OSLDs) are used to measure and monitor radiation in medical applications. Of recent, photonic devices have also been adopted. This article evaluates recent research and advancements in the applications of photonic devices in medical radiation detection primarily focusing on four types; photodiodes - including light-emitting diodes (LEDs), phototransistors-including metal oxide semiconductor field effect transistors (MOSFETs), photovoltaic sensors/solar cells, and charge coupled devices/charge metal oxide semiconductors (CCD/CMOS) cameras. A comprehensive analysis of the operating principles and recent technologies of these devices is performed. Further, critical evaluation and comparison of their benefits and limitations as dosimeters is done based on the available studies. Common factors barring photonic devices from being used as radiation detectors are also discussed; with suggestions on possible solutions to overcome these barriers. Finally, the potentials of these devices and the challenges of realizing their applications as quintessential dosimeters are highlighted for future research and improvements.

SUBMITTER: Damulira E

PROVIDER: S-EPMC6567371 | biostudies-literature | 2019 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

A Review: Photonic Devices Used for Dosimetry in Medical Radiation.

Damulira Edrine E Yusoff Muhammad Nur Salihin MNS Omar Ahmad Fairuz AF Mohd Taib Nur Hartini NH

Sensors (Basel, Switzerland) 20190514 10

Numerous instruments such as ionization chambers, hand-held and pocket dosimeters of various types, film badges, thermoluminescent dosimeters (TLDs) and optically stimulated luminescence dosimeters (OSLDs) are used to measure and monitor radiation in medical applications. Of recent, photonic devices have also been adopted. This article evaluates recent research and advancements in the applications of photonic devices in medical radiation detection primarily focusing on four types; photodiodes - ...[more]

PMID: 31091779

Similar Datasets

Project description:Background: There is a wide variety of participatory approaches to involve stakeholders in the development of medical devices, but there is no comprehensive overview of these approaches. We therefore studied what participatory approaches are used in the development of medical devices as well as the most important characteristics and challenges of these approaches. Methods: We conducted a scoping review and searched PubMed, Embase and Web of Science for articles published between July 2014 and July 2019. Papers were included if they presented original research featuring any form of stakeholder participation in the development of medical devices. We used The Spectrum of Public Participation to categorise the approach of each paper. Subsequently, we described the characteristics of each approach: the stakeholders involved, data collection methods, and topics addressed. We also identified challenges of the approaches as reported by researchers. Results: 277 papers were included, which could be categorised into three levels of participation: collaboration, involvement, and consultation. Patients and healthcare professionals are frequently engaged in all approaches. The most often used methods are workshops in the collaboration approach papers, and interviews in the involvement and consultation approach papers. Topics addressed in all approaches are: the problem, device requirements, design choices, testing, and procedural aspects of involvement. Reported challenges entail issues related to sampling, analysis, social dynamics, feasibility, and the limited number of topics that can be addressed. Conclusion: Participatory approaches reported in literature can be categorised in three overarching approaches that have comparable methodological characteristics. This suggests that if researchers want to apply a participatory approach it is not necessary to adopt a pre-determined approach, such as ‘participatory action research’ (PAR). Instead, they can independently determine the degree of participation, stakeholders, methods, topics, and strategies to account for challenges, making sure the participatory approach fits their research question and context.

Project description:IntroductionAdditive manufacturing or 3-dimensional printing has become a widespread technology with many applications in medicine. We have conducted a systematic review of its application in radiation oncology with a particular emphasis on the creation of phantoms for image quality assessment and radiation dosimetry. Traditionally used phantoms for quality assurance in radiotherapy are often constraint by simplified geometry and homogenous nature to perform imaging analysis or pretreatment dosimetric verification. Such phantoms are limited due to their ability in only representing the average human body, not only in proportion and radiation properties but also do not accommodate pathological features. These limiting factors restrict the patient-specific quality assurance process to verify image-guided positioning accuracy and/or dose accuracy in "water-like" condition.Methods and resultsEnglish speaking manuscripts published since 2008 were searched in 5 databases (Google Scholar, Scopus, PubMed, IEEE Xplore, and Web of Science). A significant increase in publications over the 10 years was observed with imaging and dosimetry phantoms about the same total number (52 vs 50). Key features of additive manufacturing are the customization with creation of realistic pathology as well as the ability to vary density and as such contrast. Commonly used printing materials, such as polylactic acid, acrylonitrile butadiene styrene, high-impact polystyrene and many more, are utilized to achieve a wide range of achievable X-ray attenuation values from -1000 HU to 500 HU and higher. Not surprisingly, multimaterial printing using the polymer jetting technology is emerging as an important printing process with its ability to create heterogeneous phantoms for dosimetry in radiotherapy.ConclusionGiven the flexibility and increasing availability and low cost of additive manufacturing, it can be expected that its applications for radiation medicine will continue to increase.

Dataset Information

A Review: Photonic Devices Used for Dosimetry in Medical Radiation.

Publications

A Review: Photonic Devices Used for Dosimetry in Medical Radiation.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets