Dataset Information

Internal Fixation of Complicated Acetabular Fractures Directed by Preoperative Surgery with 3D Printing Models.

ABSTRACT: The purpose of this article is to evaluate the efficacy and feasibility of preoperative surgery with 3D printing-assisted internal fixation of complicated acetabular fractures. A retrospective case review was performed for the above surgical procedure. A 23-year-old man was confirmed by radiological examination to have fractures of multiple ribs, with hemopneumothorax and communicated fractures of the left acetabulum. According to the Letounel and Judet classification, T-shaped fracture involving posterior wall was diagnosed. A 3D printing pelvic model was established using CT digital imaging and communications in medicine (DICOM) data preoperatively, with which surgical procedures were simulated in preoperative surgery to confirm the sequence of the reduction and fixation as well as the position and length of the implants. Open reduction with internal fixation (ORIF) of the acetabular fracture using modified ilioinguinal and Kocher-Langenbeck approaches was performed 25 days after injury. Plates that had been pre-bent in the preoperative surgery were positioned and screws were tightened in the directions determined in the preoperative planning following satisfactory reduction. The duration of the operation was 170 min and blood loss was 900 mL. Postoperative X-rays showed that anatomical reduction of the acetabulum was achieved and the hip joint was congruous. The position and length of the implants were not different when compared with those in preoperative surgery on 3D printing models. We believe that preoperative surgery using 3D printing models is beneficial for confirming the reduction and fixation sequence, determining the reduction quality, shortening the operative time, minimizing preoperative difficulties, and predicting the prognosis for complicated fractures of acetabulam.

SUBMITTER: Liu ZJ

PROVIDER: S-EPMC6584437 | biostudies-literature | 2017 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Internal Fixation of Complicated Acetabular Fractures Directed by Preoperative Surgery with 3D Printing Models.

Liu Zhao-Jie ZJ Jia Jian J Zhang Yin-Guang YG Tian Wei W Jin Xin X Hu Yong-Cheng YC

Orthopaedic surgery 20170526 2

The purpose of this article is to evaluate the efficacy and feasibility of preoperative surgery with 3D printing-assisted internal fixation of complicated acetabular fractures. A retrospective case review was performed for the above surgical procedure. A 23-year-old man was confirmed by radiological examination to have fractures of multiple ribs, with hemopneumothorax and communicated fractures of the left acetabulum. According to the Letounel and Judet classification, T-shaped fracture involvin ...[more]

PMID: 28547894

Similar Datasets

Project description:BackgroundTotal hip arthroplasty (THA) is the treatment of choice for posttraumatic arthritis with failed internal fixation for hip fractures. However, the postoperative prognosis is not clear.Questions/purposesThe primary aim of the study is to report the postoperative outcome, prognosis, and complication rates of total hip arthroplasty in posttraumatic hip arthritis after failed internal fixation of fractures around the hip. The secondary aim of the study is to report results among different fracture types around the hip.Patients and methodsWe enrolled salvage THA patients after failed internal fixation of fractures around the hip and matched control patients undergoing primary THA for hip osteoarthritis. Subgroup analysis was performed to compare the postoperative outcomes, prognosis, and complication rates of salvage THA in posttraumatic hip arthritis after failed internal fixation of different fracture types around the hip.ResultsA total of 315 THAs (105 salvage THAs and 210 primary THAs) were analyzed. Patients with salvage THA had a longer operative time, lower postoperative hemoglobin (Hb) level, more Hb drop (2.2 ± 1.4 vs. 1.7 ± 1.2 gm/dl, p = 0.002), and delayed ambulation. The salvage THA group also had a higher dislocation rate within 2 months after salvage THA (9.5% vs. 1.9%, p = 0.002), reoperation rate (10.5% vs. 3.8%, p = 0.019, including debridement, open and closed reduction under sedation, revision surgery, surgical fixation for periprosthetic fractures), and revision rate (5.7% vs. 0.5%, p = 0.003) than patients undergoing primary THA. Patients who had failed fixation for acetabular fractures were younger and tended to recover well. Patients with previous intertrochanteric fracture had the longest operative time, more hip pain (83.8%, p = 0.022) and more complications.ConclusionSalvage THA in posttraumatic hip arthritis after failed internal fixation required a longer operative time and led to more blood loss and postoperative complications. The dislocation, reoperation, and revision rates after salvage THA were higher than those after primary THA. Patients with salvage THA after failed internal fixation for intertrochanteric fractures were the most susceptible to more complications compared to those with femoral neck fracture or acetabular fracture. Level of Evidence level III.

Project description:BackgroundThe surgical treatment of acetabular fracture has adverse outcomes and high risk, and minimally invasive method is a good way to reduce complications and improve hip joint function. This study is to investigate the treatment of certain acetabular fractures primarily involving the anterior column and quadrilateral plate using a limited pararectus approach and the anatomical plates.MethodsA consecutive cohort of 17 patients with anterior displaced acetabular fractures were managed operatively with a limited approach and the anatomical plates. Ten patients had anterior column fractures, 1 patient had anterior wall fracture, 4 patients had transverse fractures and 2 patients had anterior column with posterior hemi-transverse fractures. The inferior half of the pararectus approach was adopted to open the medial window and to access the anterior column and the quadrilateral plate. The anatomical plates were used for internal fixation. Residual displacements were assessed on the postoperative CT scans using a standardized digital method. The surgical details, hip functional outcomes, and complications were noted.ResultsAll of the patients were operated using the limited pararectus approach and the anatomical plates successfully. The mean operative time and blood loss were 90.9 min and 334.1 ml, respectively. The average postoperative residual gap and step displacement on CT were 2.9 mm and 0.7 mm, respectively. The radiological outcome was estimated according to the Matta score, ten of the cases were graded anatomical, six were graded imperfect, and one was graded poor. Follow up averaged 15 months. Functional outcomes were excellent for nine, good for six, and fair for two. It was noted that one case of peritoneal injury was repaired intraoperatively.ConclusionsThe limited pararectus approach with the advantages of less trauma, direct exposure to the anterior column and quadrilateral plate. The anatomical plates can fit with the surface of the acetabulum, which saves the time of remodeling plates during operation and facilitate fracture reduction. The combination approach can be a good choice for limited surgery of displaced anterior acetabular fractures especially involving the quadrilateral plate.

Project description:Ankle fractures are common and can be associated with severe morbidity. Risk factors for short-term adverse events and readmission after open reduction and internal fixation (ORIF) of ankle fractures have not been fully characterized.The purpose of our study was to determine patient rates and risk factors for (1) any adverse event; (2) severe adverse events; (3) infectious complications; and (4) readmission after ORIF of ankle fractures.Patients who underwent ORIF for ankle fracture from 2005 to 2012 were identified in the American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP(®)) database using International Classification of Diseases, 9(th) Revision and Current Procedural Terminology codes. Patients with missing perioperative data were excluded from this study. Patient characteristics were tested for association with any adverse event, severe adverse events, infectious complications, and readmission using bivariate and multivariate logistic regression analyses.Of the 4412 patients identified, 5% had an adverse event. Any adverse event was associated with insulin-dependent diabetes mellitus (IDDM; odds ratio [OR], 2.05; 95% confidence interval [CI], 1.35-3.1; p = 0.001), age ? 60 years (OR, 1.97; 95% CI, 1.22-3.2; p = 0.006), American Society of Anesthesiologists classification ? 3 (OR, 1.69; 95% CI, 1.2-2.37; p = 0.002), bimalleolar fracture (OR, 1.6; 95% CI, 1.08-2.37; p = 0.020), hypertension (OR, 1.47; 95% CI, 1.04-2.09; p = 0.031), and dependent functional status (OR, 1.47; 95% CI, 1.02-2.14; p = 0.040) on multivariate analysis. Severe adverse events occurred in 3.56% and were associated with ASA classification ? 3 (OR, 2.01; p = 0.001), pulmonary disease (OR, 1.9; p = 0.004), dependent functional status (OR, 1.8; p = 0.005), and hypertension (OR, 1.65; p = 0.021). Infectious complications occurred in 1.75% and were associated with IDDM (OR, 3.51; p < 0.001), dependent functional status (OR, 2.4; p = 0.002), age ? 60 years (OR, 2.28; p = 0.028), and bimalleolar fracture (OR, 2.19; p = 0.030). Readmission occurred in 3.17% and was associated with ASA classification ? 3 (OR, 2.01; p = 0.017).IDDM was associated with an increased rate of adverse events after ankle fracture ORIF, whereas noninsulin-dependent diabetes mellitus was not. IDDM management deserves future study, particularly with respect to glycemic control, a potential confounder that could not be assessed with the ACS-NSQIP registry. Increased ASA class was associated with readmission, and future prospective investigations should evaluate the effectiveness of increasing the discharge threshold, discharging to extended-care facilities, and/or home nursing evaluations in this at-risk population.Level III, prognostic study.

Project description:BACKGROUND:Geriatric acetabular fractures require fixation with sufficient primary stability to allow for immediate full-weight bearing. Minimally-invasive procedures would be desirable in order to keep perioperative morbidity low. The purpose of this study was to compare the biomechanical strength of lag screw-only fixation of anterior column posterior hemi-transverse (ACPHT) acetabular fractures to standard anatomical plate fixation. METHODS:Standardized ACPHT fractures were created in fourth generation synthetic pelvis models and stabilized by either an anatomical buttress plate (n?=?4) or by a screw-only construct (n?=?4). In a validated setup, a cyclic loading protocol was applied with increasing axial force (3200?cycles, 175?N to 2250?N). Construct survival, acetabular fracture motion, and mode of failure were assessed. RESULTS:The median number of cycles needed until failure of the construct occurred was 2304?cycles (range, 2020 to 2675) in the plate fixation group and 3200?cycles (range, 3101 to 3200) for the screw fixation constructs (p?=?.003). With regard to energy absorbed until failure, the plate fixation group resisted to 1.57?×?106?N*cycles (range, 1.21?×?106 to 2.14?×?106) and the screw fixation group to 3.17?×?106?N*cycles (range, 2.92?×?106 to 3.17?×?106; p?=?.001). All plate fixation specimens failed with a break-out of the posterior-column screw in the quadrilateral wing of the anatomical plate within a maximum load of 1750?N while the screw fixation constructs all survived loading of at least 2100?N. Acetabular fracture gap motion, acetabular rim angle, and medial femoral head subluxation as measures of fracture displacement were all not different between the two groups (p?>?0.1). CONCLUSIONS:In this in vitro biomechanical study, screw-only fixation of an ACPHT acetabular fracture resulted in at least as good construct survival as seen for standard buttress plate fixation. Both methods resisted sufficiently to forces that would be expected under physiologic conditions.

Dataset Information

Internal Fixation of Complicated Acetabular Fractures Directed by Preoperative Surgery with 3D Printing Models.

Publications

Internal Fixation of Complicated Acetabular Fractures Directed by Preoperative Surgery with 3D Printing Models.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets