Dataset Information

Total hip arthroplasty with rectangular stems and subtrochanteric transverse shortening osteotomy in Crowe type IV hips: a retrospective study.

ABSTRACT:

Background

The complexity of femoral and acetabular anatomy and restoring anatomic center of hip rotation in Crowe type IV developmental dysplasia of the hip (DDH) complicates standard reconstruction. The aim of this study is to evaluate surgical techniques and clinical outcomes of subtrochanteric transverse shortening osteotomy with the use of cementless rectangular cross-section femoral implants in Crowe IV dysplastic hips.

Methods

A total of 26 hips of 25 consecutive patients with Crowe type IV DDH who underwent cementless total hip arthroplasty with subtrochanteric femoral transverse shortening osteotomy were retrospectively analyzed. The Harris Hip Score, Visual Analog Scale-pain, leg length discrepancy, and vertical and lateral migration of hip rotation center were recorded.

Results

Mean age, follow-up, and time of union were 41 ± 9.7 years, 7.1 ± 1.2 years, and 3.7 ± 1.1 months, respectively. Mean Harris Hip Score significantly improved from 38 ± 5.7 to 86 ± 6.1 points postoperatively (P < .01). Mean leg length discrepancy and Visual Analog Scale significantly decreased from 4.3 ± 1.3 to 1.2 ± 0.6 cm, and 6.4 ± 1.2 to 1.8 ± 0.8 points, respectively (P < .01). One female patient had a dislocation due to acetabular liner wear, which was managed by liner and head change. One patient had Sudeck's atrophy, while another had pain on the lateral thigh, both of which were resolved with conservative management.

Conclusions

Combined transverse subtrochanteric femoral osteotomy and cementless total hip arthroplasty with rectangular cross-section femoral implants is technically demanding, effective, and safe in femoral shortening for treatment of Crowe type IV DDH.

SUBMITTER: Erdem Y

PROVIDER: S-EPMC6588717 | biostudies-literature | 2019 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Total hip arthroplasty with rectangular stems and subtrochanteric transverse shortening osteotomy in Crowe type IV hips: a retrospective study.

Erdem Yusuf Y Bek Dogan D Atbasi Zafer Z Neyisci Cagri C Yildiz Cemil C Basbozkurt Mustafa M

Arthroplasty today 20190510 2

<h4>Background</h4>The complexity of femoral and acetabular anatomy and restoring anatomic center of hip rotation in Crowe type IV developmental dysplasia of the hip (DDH) complicates standard reconstruction. The aim of this study is to evaluate surgical techniques and clinical outcomes of subtrochanteric transverse shortening osteotomy with the use of cementless rectangular cross-section femoral implants in Crowe IV dysplastic hips.<h4>Methods</h4>A total of 26 hips of 25 consecutive patients w ...[more]

PMID: 31286050

Similar Datasets

Project description:BackgroundWhen reconstructing a hip with developmental dysplasia and high dislocation, sub-trochanteric shortening osteotomy is typically needed for placing the acetabular component in the appropriate anatomical position. However, the procedure can result in complications such as non-union of the osteotomy. We evaluated the contact area and the coincidence rate between the proximal and distal fragments at different femoral osteotomy levels and lengths. We then determined the optimal location of subtrochanteric femoral shortening transverse osteotomy in patients with unilateral Crowe type IV developmental dysplasia of the hip (DDH). The consistency between the proximal and distal segments was assessed as a possible predictive indicator of the union at the osteotomy site.MethodsWe retrospectively reviewed 57 patients with unilateral Crowe type IV?DDH who underwent X-ray imaging of both hip joints. We labelled the inner and outer diameters of the circular ring as N (mm) and M (mm), respectively. We defined the overlapped area between the proximal and distal ring as contact area S (mm2), and the ratio of contact area to distal ring area as coincidence rate R.ResultsN varied from 9.8-15.2?mm and M varied from 20.7-24?mm, both demonstrated a decreasing trend in the proximal to distal direction. At osteotomy lengths ranging from 0.5-2?cm, there were no differences in S between the different levels of osteotomy in each group. At osteotomy lengths ?2.5?cm, a significant higher coincidence rate was noted from 2?cm below the lesser trochanter to other positions below the level. At osteotomy lengths from 3 to 5.5?cm, a significantly higher coincidence rate was observed from the level of 1.5?cm below the lesser trochanter to other positions below the level.ConclusionsOur findings suggest that femoral shortening transverse osteotomy at the optimal subtrochanteric level can predictably increase the contact area and coincidence rate, which may contribute to the union at the osteotomy site. Considering the stability of the prostheses, it appears appropriate that osteotomy location should be shifted slightly distally.Trial registrationRetrospectively registered.

Project description:BackgroundThis study aimed to accurately evaluate the matching of proximal and distal femoral segments and fitting of the femur-femoral stem in patients with Crowe type IV developmental dysplasia of the hip (DDH) who have undergone subtrochanteric osteotomy at different locations with an implanted Wagner cone stem to improve the rate of the bone union at the osteotomy site.MethodsThree-dimensional femur morphology of 40 patients with Crowe type IV DDH was evaluated at each cross-section to determine the femoral cortical bone area. This study focused on five osteotomy lengths (2.5, 3, 3.5, 4, and 4.5 cm). The overlapped area between the proximal and distal cortical bone segments was defined as the contact area (S, mm2), and the contact area to distal cortical bone area ratio was defined as the coincidence rate (R). Three indicators were used to evaluate the matching and fitting of the osteotomy sites with the implanted Wagner cone stems: (1) higher S and R between the proximal and distal segments; (2) the effective fixation length of the femoral stem at the distal segments being at least 1.5 cm; and (3) osteotomy did not involve the isthmus.ResultsIn all groups, S significantly decreased in the two proximal levels above the 0.5 cm level below the lesser trochanter (LT) compared with those below this level. In comparison, at osteotomy lengths from 2.5 to 4 cm, R significantly decreased in the three proximal levels. The optimal osteotomy levels ranged from 1.5 and 2.5 cm below the LT for an appropriately sized stem.ConclusionsSubtrochanteric osteotomy at the optimal level not only ensures fitting of the femur-femoral stem but also meets the requirements of a higher S and R to ensure adequate reduction and stabilization at the osteotomy site, which may contribute to the bone union. Although the optimal osteotomy level varies with the size of the femoral stem and the length of the subtrochanteric osteotomy, the optimal osteotomy levels for an appropriately sized Wagner cone femoral stem implantation range from 1.5 to 2.5 cm below the LT.

Dataset Information

Total hip arthroplasty with rectangular stems and subtrochanteric transverse shortening osteotomy in Crowe type IV hips: a retrospective study.

Background

Methods

Results

Conclusions

Publications

Total hip arthroplasty with rectangular stems and subtrochanteric transverse shortening osteotomy in Crowe type IV hips: a retrospective study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets