Dataset Information

Novel insights into pore-scale dynamics of wettability alteration during low salinity waterflooding.

ABSTRACT: Low salinity waterflooding has proven to accelerate oil production at core and field scales. Wettability alteration from a more oil-wetting to a more water-wetting condition has been established as one of the most notable effects of low salinity waterflooding. To induce the wettability alteration, low salinity water should be transported to come in contact with the oil-water interfaces. Transport under two-phase flow conditions can be highly influenced by fluids topology that creates connected pathways as well as dead-end regions. It is known that under two-phase flow conditions, the pore space filled by a fluid can be split into flowing (connected pathways) and stagnant (deadend) regions due to fluids topology. Transport in flowing regions is advection controlled and transport in stagnant regions is predominantly diffusion controlled. To understand the full picture of wettability alteration of a rock by injection of low salinity water, it is important to know i) how the injected low salinity water displaces and mixes with the high salinity water, ii) how continuous wettability alteration impacts the redistribution of two immiscible fluids and (ii) role of hydrodynamic transport and mixing between the low salinity water and the formation brine (high salinity water) in wettability alteration. To address these two issues, computational fluid dynamic simulations of coupled dynamic two-phase flow, hydrodynamic transport and wettability alteration in a 2D domain were carried out using the volume of fluid method. The numerical simulations show that when low salinity water was injected, the formation brine (high salinity water) was swept out from the flowing regions by advection. However, the formation brine residing in stagnant regions was diffused very slowly to the low salinity water. The presence of formation brine in stagnant regions created heterogeneous wettability conditions at the pore scale, which led to remarkable two-phase flow dynamics and internal redistribution of oil, which is referred to as the "pull-push" behaviour and has not been addressed before in the literature. Our simulation results imply that the presence of stagnant regions in the tertiary oil recovery impedes the potential of wettability alteration for additional oil recovery. Hence, it would be favorable to inject low salinity water from the beginning of waterflooding to avoid stagnant saturation. We also observed that oil ganglia size was reduced under tertiary mode of low salinity waterflooding compared to the high salinity waterflooding.

SUBMITTER: Aziz R

PROVIDER: S-EPMC6592911 | biostudies-literature | 2019 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Novel insights into pore-scale dynamics of wettability alteration during low salinity waterflooding.

Aziz Rimsha R Joekar-Niasar Vahid V Martínez-Ferrer Pedro J PJ Godinez-Brizuela Omar E OE Theodoropoulos Constantinos C Mahani Hassan H

Scientific reports 20190625 1

Low salinity waterflooding has proven to accelerate oil production at core and field scales. Wettability alteration from a more oil-wetting to a more water-wetting condition has been established as one of the most notable effects of low salinity waterflooding. To induce the wettability alteration, low salinity water should be transported to come in contact with the oil-water interfaces. Transport under two-phase flow conditions can be highly influenced by fluids topology that creates connected p ...[more]

PMID: 31239462

Similar Datasets

Project description:Although thermal methods have been popular and successfully applied in heavy oil recovery, they are often found to be uneconomic or impractical. Therefore, alternative production protocols are being actively pursued and interesting options include water injection and polymer flooding. Indeed, such techniques have been successfully tested in recent laboratory investigations, where X-ray scans performed on homogeneous rock slabs during water flooding experiments have shown evidence of an interesting new phenomenon-post-breakthrough, highly dendritic water fingers have been observed to thicken and coalesce, forming braided water channels that improve sweep efficiency. However, these experimental studies involve displacement mechanisms that are still poorly understood, and so the optimization of this process for eventual field application is still somewhat problematic. Ideally, a combination of two-phase flow experiments and simulations should be put in place to help understand this process more fully. To this end, a fully dynamic network model is described and used to investigate finger thickening during water flooding of extra-heavy oils. The displacement physics has been implemented at the pore scale and this is followed by a successful benchmarking exercise of the numerical simulations against the groundbreaking micromodel experiments reported by Lenormand and co-workers in the 1980s. A range of slab-scale simulations has also been carried out and compared with the corresponding experimental observations. We show that the model is able to replicate finger architectures similar to those observed in the experiments and go on to reproduce and interpret, for the first time to our knowledge, finger thickening following water breakthrough. We note that this phenomenon has been observed here in homogeneous (i.e. un-fractured) media: the presence of fractures could be expected to exacerbate such fingering still further. Finally, we examine the impact of several system parameters, including core length, wettability and injection rate, on the extent and efficiency of the finger swelling phenomenon.

Project description:Low salinity waterflooding (LSWF) and its variants also known as smart water or ion tuned water injection have emerged as promising enhanced oil recovery (EOR) methods. LSWF is a complex process controlled by several mechanisms and parameters involving oil, brine, and rock composition. The major mechanisms and processes controlling LSWF are still being debated in the literature. Thus, the establishment of an approach that relates these parameters to the final recovery factor (RFf) is vital. The main objective of this research work was to use a number of artificial intelligence models to develop robust predictive models based on experimental data and main parameters controlling the LSWF determined through sensitivity analysis and feature selection. The parameters include properties of oil, rock, injected brine, and connate water. Different operational parameters were considered to increase the model accuracy as well. After collecting the relevant data from 99 experimental studies reported in the literature, the database underwent a comprehensive and rigorous data preprocessing stage, which included removal of duplicates and low-variance features, missing value imputation, collinearity assessment, data characteristic assessment, outlier removal, feature selection, data splitting (80-20 rule was applied), and data scaling. Then, a number of methods such as linear regression (LR), multilayer perceptron (MLP), support vector machine (SVM), and committee machine intelligent system (CMIS) were used to link 1316 data samples assembled in this research work. Based on the obtained results, the CMIS model was proven to produce superior results compared to its counterparts such that the root mean squared rrror (RMSE) values for both training and testing data are 4.622 and 7.757, respectively. Based on the feature importance results, the presence of Ca2+ in the connate water, Na+ in the injected brine, core porosity, and total acid number of the crude oil are detected as the parameters with the highest impact on the RFf. The CMIS model proposed here can be applied with a high degree of confidence to predict the performance of LSWF in sandstone reservoirs. The database assembled for the purpose of this research work is so far the largest and most comprehensive of its kind, and it can be used to further delineate mechanisms behind LSWF and optimization of this EOR process in sandstone reservoirs.

Project description:We perform a numerical and experimental study of immiscible two-phase flows within predominantly 2D transparent PDMS microfluidic domains with disordered pillar-like obstacles, that effectively serve as artificial porous structures. Using a high sensitivity pressure sensor at the flow inlet, we capture experimentally the pressure dynamics under fixed flow rate conditions as the fluid-fluid interface advances within the porous domain, while also monitoring the corresponding phase distribution patterns using optical microscopy. Our experimental study covers 4 orders of magnitude with respect to the injection flow rate and highlights the characteristics of immiscible displacement processes during the transition from the capillarity-controlled interface displacement regime at lower flow rates, where the pores are invaded sequentially in the form of Haines jumps, to the viscosity-dominated regime, where multiple pores are invaded simultaneously. In the capillary regime, we recover a clear correlation between the recorded inlet pressure and the pore-throat diameter invaded by the interface that follows the Young-Laplace equation, while during the transition to the viscous regime such a correlation is no longer evident due to multiple pore-throats being invaded simultaneously (but also due to significant viscous pressure drop along the inlet and outlet channels, that effectively mask capillary effects). The performed experimental study serves for the validation of a robust Level-Set model capable of explicitly tracking interfacial dynamics at sub-pore scale resolutions under identical flow conditions. The numerical model is validated against both well-established theoretical flow models, that account for the effects of viscous and capillary forces on interfacial dynamics, and the experimental results obtained using the developed microfluidic setup over a wide range of capillary numbers. Our results show that the proposed numerical model recovers very well the experimentally observed flow dynamics in terms of phase distribution patterns and inlet pressures, but also the effects of viscous flow on the apparent (i.e. dynamic) contact angles in the vicinity of the pore walls. For the first time in the literature, this work clearly shows that the proposed numerical approach has an undoubtable strong potential to simulate multiphase flow in porous domains over a wide range of Capillary numbers.

Dataset Information

Novel insights into pore-scale dynamics of wettability alteration during low salinity waterflooding.

Publications

Novel insights into pore-scale dynamics of wettability alteration during low salinity waterflooding.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets