Direct electrochemical oxidation of alcohols with hydrogen evolution in continuous-flow reactor.
Ontology highlight
ABSTRACT:
SUBMITTER: Wang D
PROVIDER: S-EPMC6594969 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:To enable the large-scale use of hydrogen fuel cells for mobility applications, convenient methods for on-board hydrogen storage and release are required. A promising approach is liquid organic hydrogen carriers (LOHCs), since these are safe, available on a large scale, and compatible with existing refueling infrastructure. Usually, LOHC dehydrogenation is carried out in batch-type reactors by transition metals and their complexes and suffers from slow H2 release kinetics and/or inability to reach high energy density by weight, owing to low conversion or the need to dilute the reaction mixture. In this study, a continuous flow reactor is used in combination with a heterogenized iridium pincer complex, which enables a tremendous increase in LOHC dehydrogenation rates. Thus, dehydrogenation of isopropanol is performed in a regime that, in terms of gravimetric energy density, hydrogen generation rate, and precious metal content, is potentially compatible with applications in a fuel-cell powered car.
| S-EPMC9310812 | biostudies-literature
Project description:Chiral compounds have become of great interest to the pharmaceutical industry as they possess various biological activities. Concurrently, the concept of "memory of chirality" has been proven as a powerful tool in asymmetric synthesis, while flow chemistry has begun its rise as a new enabling technology to add to the ever increasing arsenal of techniques available to the modern day chemist. Here, we have employed a new simple electrochemical microreactor design to oxidise an L-proline derivative at room temperature in continuous flow. Compared to batch, organic electrosynthesis via microflow reactors are advantageous because they allow shorter reaction times, optimization and scale up, safer working environments, and high selectivities (e.g. reduce overoxidation). Flow electrochemical reactors also provide high surface-to-volume ratios and impart the possibility of excluding the supporting electrolyte due to a very short interelectrode distance. By the comparison of Hofer Moest type electrochemical oxidations at room temperature in batch and flow, we conclude that continuous flow electrolysis is superior to batch, producing a good yield (71%) and a higher enantiomeric excess (64%). These results show that continuous flow has the potential to act as a new enabling technology for asymmetric synthesis to replace some aspects of conventional batch electrochemical processes.
| S-EPMC7539001 | biostudies-literature
Project description:Here, we report the development of catalysts comprising highly dispersed Au on an alumina (Al2O3) support for the oxidation of glycerol to high-value carboxylic acids in a liquid-phase flow reactor. The catalysts were prepared by means of a deposition-precipitation method. To ensure that the catalysts could be used for long-term catalytic conversions in a liquid-phase flow reactor, we chose an alumina support with high temperature stability and a particle size (50-200 μm) large enough to prevent leakage of the catalyst from the reactor. One of the five catalysts had a high catalytic activity for the conversion of glycerol to the high-value carboxylic acids, glyceric acid and tartronic acid (conversion of glycerol >70%), and the catalyst retained its catalytic activity over long-term use (up to 1770 min). Pretreatment of the catalyst with fructose, a mild reductant, increased the activity of the catalyst. Scanning transmission electron microscopy revealed three Au species highly dispersed on the surface of the alumina support-Au nanoparticles (mode = 7.5-10 nm), Au clusters (1-2 nm), and atomic Au.
| S-EPMC6645304 | biostudies-literature
Project description:Alcohol to aldehyde conversion is a critical reaction in the industry. Herein, a new electrochemical method is introduced that converts 1 mmol of alcohols to aldehydes and ketones in the presence of N-hydroxyphthalimide (NHPI, 20 mol%) as a mediator; this conversion is achieved after 8.5 h at room temperature using a piece of Ni foam (1.0 cm2) and without adding an extra-base or a need for high temperature. Using this method, 10 mmol (1.08 g) of benzyl alcohol was also successfully oxidized to benzaldehyde (91%) without any by-products. This method was also used to oxidize other alcohols with high yield and selectivity. In the absence of a mediator, the surface of the nickel foam provided oxidation products at the lower yield. After the reaction was complete, nickel foam (anode) was characterized by a combination of scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), and spectroelectrochemistry, which pointed to the formation of nickel oxide on the surface of the electrode. On the other hand, using other electrodes such as Pt, Cu, Fe, and graphite resulted in a low yield for the alcohol to aldehyde conversion.
| S-EPMC7653038 | biostudies-literature
Project description:The direct hydroxylation of arene C-H bonds is a highly sought-after transformation but remains an unsolved challenge due to the difficulty in efficient and regioselective C-H oxygenation and high reactivity of the phenolic products leading to overoxidation. Herein we report electrochemical C-H hydroxylation of arenes in continuous flow for the synthesis of phenols. The method is characterized by broad scope (compatible with arenes of diverse electronic properties), mild conditions without any catalysts or chemical oxidants, and excellent scalability as demonstrated by the continuous production of 1 mol (204 grams) of one of the phenol products.
| S-EPMC9270493 | biostudies-literature
Project description:Electrochemical oxidation (EO) is often used in the advanced treatment of refractory wastewater. However, in a conventional EO process of direct-current (DC) power supply, oxide layers often form on the anodes, which not only hinder the oxidation reaction on them but also cause higher energy consumption. In this paper, a biologically treated leachate (BTL) of municipal solid waste (MSW) was comparably treated by EO with DC (DC-EO), monopulse (MP-EO), and double pulse (DP-EO) power source models in a home-made multi-channel flow reactor. The effects of process parameters of current density (I A), superficial liquid velocity (U L), pulse frequency (f P), duty ratio (R D), and so forth on the removal efficiency of chemical oxygen demand (COD) (RECOD), total organic carbon (TOC) (RETOC), and total nitrogen (TN) (RETN) were investigated simultaneously. Average energy consumption () and organic composition of the treated effluent of DC-EO and MP-EO were also compared comprehensively, and a new mechanism of MP-EO has been proposed accordingly. Under optimal conditions, 2 L of BTL was treated by MP-EO for 180 min, and the RECOD, RETOC, and RETN could reach as high as 80, 30, and 80%, respectively. Compared with DC-EO, the of MP-EO is reduced by 69.27%. Besides, the kinds of organic matter in the treated effluent of MP-EO are reduced from 53 in the BTL to 11, which is much less than in the DC-EO process of 29 kinds. Therefore, the MP-EO process exhibits excellent removal performance of organics and TN and economic prospects in the treatment of refractory organic wastewater.
| S-EPMC8495886 | biostudies-literature
Project description:Hydrogen peroxide (H2O2) is electrochemically produced via oxygen (O2) reduction on a carbon cathode surface. In order to enhance the production of H2O2, anodic loss pathways, which significantly reduce the overall H2O2 production rate, should be inhibited. In this study, we investigate the effects of organic electron donors (i.e., typical chemical contaminants) on the anodic loss pathways of H2O2 in a single-cell electrochemical reactor that employs an anode composed of TiO2 over-coated on a mixed-metal oxide ohmic contact catalyst, Ir0.7Ta0.3O2, deposited on a Ti-metal that is coupled with a graphite rod cathode in a sodium sulfate (Na2SO4) electrolyte that is saturated with oxygen (O2). Organic electron donors are shown to enhance the electrochemical production of H2O2, while simultaneously undergoing oxidative degradation. The observed positive effect of organic electron donors on the electrochemical production of H2O2 is due in part to a preferential adsorption of organic substrates on the TiO2 outer layer of the anode. The sorption of the organic electron donors inhibits the formation of surficial titanium hydroperoxo species ([bond, triple bond]Ti-OOH) on the anode surface. The organic sorbates also act as scavengers of surface-bound hydroxyl radical [bond, triple bond]Ti-OH. As a result, the decomposition of H2O2 on the anode surface is significantly reduced. The cathodic production rate of H2O2 at low pH is enhanced due to proton coupled electron transfer (PCET) to O2, while the anodic decomposition of H2O2 is inhibited due to electrostatic interactions between negatively-charged organic substrates and a positively-charged outer surface of the anode (TiO2 pHzpc = 5.8) at low pH.
| S-EPMC6686209 | biostudies-literature
Project description:Continuous, in situ detection of hydrogen sulfide (H2S) in biological milieu is made possible with electrochemical methods, but direct amperometry is constrained by the generation of elemental sulfur as an oxidative byproduct. Deposition of a sulfur layer passivates the working electrode, reducing sensitivity and causing performance variability. Herein, we report on the use of a surface preconditioning procedure to deposit elemental sulfur on a glassy carbon electrode prior to measurement and evaluate performance with common analytical metrics. The lack of traditional anti-poisoning techniques (e.g. redox mediators, cleaning pulses) also allowed for facile surface modification with electropolymerized films. For the first time, a series of electropolymerized films were characterized for their H2S permselective behavior against common biological interferents. Highly selective, film-modified electrodes were then evaluated for their anti-biofouling ability in simulated wound fluid. The final optimized electrode was capable of measuring H2S with a low detection limit (i.e., <100 nM) and ∼80% of its initial sensitivity in proteinaceous media.
| S-EPMC6641862 | biostudies-literature
Project description:The Bohlmann-Rahtz pyridine synthesis and the Hantzsch dihydropyridine synthesis can be carried out in a microwave flow reactor or using a conductive heating flow platform for the continuous processing of material. In the Bohlmann-Rahtz reaction, the use of a Brønsted acid catalyst allows Michael addition and cyclodehydration to be carried out in a single step without isolation of intermediates to give the corresponding trisubstituted pyridine as a single regioisomer in good yield. Furthermore, 3-substituted propargyl aldehydes undergo Hantzsch dihydropyridine synthesis in preference to Bohlmann-Rahtz reaction in a very high yielding process that is readily transferred to continuous flow processing.
| S-EPMC3817555 | biostudies-literature
Project description:Continuous-flow nanocatalysis based on metal nanoparticle catalyst-anchored flow reactors has recently provided an excellent platform for effective chemical manufacturing. However, there has been limited progress in porous structure design and recycling systems for metal nanoparticle-anchored flow reactors to create more efficient and sustainable catalytic processes. In this study, traditional paper is used for a highly efficient, recyclable, and even renewable flow reactor by tailoring the ultrastructures of wood pulp. The "paper reactor" offers hierarchically interconnected micro- and nanoscale pores, which can act as convective-flow and rapid-diffusion channels, respectively, for efficient access of reactants to metal nanoparticle catalysts. In continuous-flow, aqueous, room-temperature catalytic reduction of 4-nitrophenol to 4-aminophenol, a gold nanoparticle (AuNP)-anchored paper reactor with hierarchical micro/nanopores provided higher reaction efficiency than state-of-the-art AuNP-anchored flow reactors. Inspired by traditional paper materials, successful recycling and renewal of AuNP-anchored paper reactors were also demonstrated while high reaction efficiency was maintained.
| S-EPMC5499728 | biostudies-literature