Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

α-Fe₂O₃ Nanoparticles/Vermiculite Clay Material: Structural, Optical and Photocatalytic Properties.

ABSTRACT: Photocatalysis is increasingly becoming a center of interest due to its wide use in environmental remediation. Hematite (α-Fe₂O₃) is one promising candidate for photocatalytic applications. Clay materials as vermiculite (Ver) can be used as a carrier to accommodate and stabilize photocatalysts. Two different temperatures (500 °C and 700 °C) were used for preparation of α-Fe₂O₃ nanoparticles/vermiculite clay materials. The experimental methods used for determination of structural, optical and photocatalytic properties were X-ray fluorescence (ED-XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray spectrometry (EDS), N₂ adsorption method (BET), diffuse reflectance UV-Vis spectroscopy (DRS), photoluminescence spectroscopy (PL) and photocatalytic reduction of CO₂, respectively. The data from XRD were confronted with molecular modeling of the material arrangement in the interlayer space of vermiculite structure and the possibility of anchoring the α-Fe₂O₃ nanoparticles to the surface and edge of vermiculite. Correlations between structural, textural, optical and electrical properties and photocatalytic activity have been studied in detail. The α-Fe₂O₃ and α-Fe₂O₃/Ver materials with higher specific surface areas, a smaller crystallite size and structural defects (oxygen vacancies) that a play crucial role in photocatalytic activity, were prepared at a lower calcination temperature of 500 °C.

SUBMITTER: Valaskova M

PROVIDER: S-EPMC6600952 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Structural, Optical, and Arsenic Removal Properties of Sol-Gel Synthesized Fe-Doped TiO2 Nanoparticles.

Project description:Pure and Fe-doped TiO2 nanoparticles were synthesized by the sol-gel method. The samples were characterized by X-ray diffraction, Raman spectroscopy, BET, UV-vis diffuse reflectance spectroscopy, and scanning electron microscopy. The results show a dependence between the crystallite size and the amount of dopant, which decreases from 13.02 to 12.81 nm. The same behavior was observed in the optical properties, where the band gap decreased from 3.2 to 2.86 eV. The arsenic (V) adsorption was tested in aqueous solution containing 5 mg/L of arsenic and 0.5 g/L of adsorbent at pH 7 and in dark conditions. The results indicate that the TiO2-B sample shows a higher arsenic removal, reaching 88% arsenic removal from the water at pH 7. Thus, it is also shown that the best performance occurs at pH 5, where it reaches an arsenic removal of 94%. Ion competition studies show that arsenic removal capacity is slightly affected by chloride, carbonate, nitrate, and sulfate ions. According to the results, the synthesized samples are a promising material for treating arsenic-contaminated water.

| S-EPMC9565318 | biostudies-literature

Influence of Different Capping Agents on the Structural, Optical, and Photocatalytic Degradation Efficiency of Magnetite (Fe3O4) Nanoparticles.

Project description:Octylamine (OTA), 1-dodecanethiol (DDT), and tri-n-octylphosphine (TOP) capped magnetite nanoparticles were prepared by co-precipitation method. Powder X-ray diffraction patterns confirmed inverse spinel crystalline phases for the as-prepared iron oxide nanoparticles. Transmission electron microscopic micrographs showed iron oxide nanoparticles with mean particle sizes of 2.1 nm for Fe3O4-OTA, 5.0 nm for Fe3O4-DDT, and 4.4 nm for Fe3O4-TOP. The energy bandgap of the iron oxide nanoparticles ranges from 2.25 eV to 2.76 eV. The iron oxide nanoparticles were used as photocatalysts for the degradation of methylene blue with an efficiency of 55.5%, 58.3%, and 66.7% for Fe3O4-OTA, Fe3O4-DDT, and Fe3O4-TOP, respectively, while for methyl orange the degradation efficiencies were 63.8%, 47.7%, and 74.1%, respectively. The results showed that tri-n-octylphosphine capped iron oxide nanoparticles are the most efficient iron oxide nano-photocatalysts for the degradation of both dyes. Scavenger studies show that electrons (e-) and hydroxy radicals (•OH) contribute significantly to the photocatalytic degradation reaction of both methylene blue and methyl orange using Fe3O4-TOP nanoparticles. The influence of the dye solution's pH on the photocatalytic reaction reveals that a pH of 10 is the optimum for methylene blue degradation, whereas a pH of 2 is best for methyl orange photocatalytic degradation using the as-prepared iron oxide nano-photocatalyst. Recyclability studies revealed that the iron oxide photocatalysts can be recycled three times without losing their photocatalytic activity.

| S-EPMC10384526 | biostudies-literature

Mycosynthesis of Hematite (α-Fe2O3) Nanoparticles Using Aspergillus niger and Their Antimicrobial and Photocatalytic Activities.

Project description:Nanoparticles (NPs) and nanomaterials (NMs) are now widely used in a variety of applications, including medicine, solar energy, drug delivery, water treatment, and pollution detection. Hematite (α-Fe2O3) nanoparticles (Hem-NPs) were manufactured in this work by utilizing a cost-effective and ecofriendly approach that included a biomass filtrate of A. niger AH1 as a bio-reducer. The structural and optical properties of Hem-NPs were investigated using X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS), and UV-visible and Fourier-transform infrared (FTIR) spectroscopies. The results revealed that all of the studied parameters, as well as their interactions, had a significant impact on the crystallite size. The average diameter size of the biosynthesized Hem-NPs ranged between 60 and 80 nm. The antimicrobial and photocatalytic activities of Hem-NPs were investigated. The antimicrobial results of Hem-NPs revealed that Hem-NPs exhibited antibacterial activity against E. coli, B. subtilis, and S. mutans with MICs of 125, 31.25, and 15.62 µg/mL, respectively. Moreover, Hem-NPs exhibited antifungal activity against C. albicans and A. fumigatus, where the MICs were 2000 and 62.5 µg/mL, respectively. The efficiency of biosynthesized Hem-NPs was determined for the rapid biodegradation of crystal violet (CV) dye, reaching up to 97 percent after 150 min. Furthermore, Hem-NPs were successfully used more than once for biodegradation and that was regarded as its efficacy. In conclusion, Hem-NPs were successfully biosynthesized using A. niger AH1 and demonstrated both antimicrobial activity and photocatalytic activity against CV dye.

| S-EPMC9404788 | biostudies-literature

Investigation of the structural, optical, elastic and electrical properties of spinel LiZn2Fe3O8 nanoparticles annealed at two distinct temperatures.

Project description:Nanoparticles of Li0.5ZnFe1.5O4 (LiZn2Fe3O8) with the spinel structure were prepared by a sol-gel auto-combustion method at two different annealing temperatures. X-ray diffractograms and Rietveld refinement confirmed the formation of the spinel structure. The morphology was analyzed by electron microscopy, which showed that the grains were composed of different crystallites. Elastic properties were determined from infrared spectroscopy. It was found that the elastic parameters increased with the increase in annealing temperatures. The band gap depends on the annealing temperature and it decreased on increasing the particle size. The conductivity of the specimen annealed at 500 °C followed either the Jonscher's model or Drude's model depending on the temperature range. This conductivity decreased when the annealing temperature was raised by 600 °C. AC conductivity was found to be controlled by the hopping model. A single relaxation phenomenon was evidenced for each sample from impedance analysis. The Nyquist diagram proved that the samples were simultaneously capacitive and resistive and also supported the presence of multiple relaxation times.

| S-EPMC9076384 | biostudies-literature

Green Synthesis of FexOy Nanoparticles with Potential Antioxidant Properties.

Project description:Iron oxide nanoparticles (FexOy-NPs) are currently being applied in numerous high-tech sectors, such as in chemical sectors for catalysis and in the medical sector for drug delivery systems and antimicrobial purposes, due to their specific, unique and magnetic properties. Nevertheless, their synthesis is under continuous investigation, as physicochemical methods are considered expensive and require toxic solvents. Thus, green nanotechnology has shown considerable promise in the eco-biogenesis of nanoparticles. In the current study, FexOy-NPs were synthesized by two different methods: via green synthesis through the use of polyphenols, which were extracted from Phoenix dactylifera L.; and via chemical synthesis, in which the reducing agent was a chemical (NaOH), and iron chloride was used as a precursor. Thus, polyphenol extraction and its ability to produce nanoparticles were evaluated based on the drying temperature used during the Phoenix dactylifera L. recollection, as well as the extraction solvent used. The results highlight the potential of polyphenols present in Phoenix dactylifera L. for the sustainable manufacture of FexOy-NPs. Finally, green and chemical syntheses were compared on the basis of physicochemical characteristics and functional properties.

| S-EPMC9315626 | biostudies-literature

Collective structural changes in vermiculite clay suspensions induced by cesium ions.

Project description:Following the Fukushima Daiichi nuclear disaster in 2011, Cs radioisotopes have been dispersed over a wide area. Most of the Cs has remained on the surface of the soil because Cs(+) is strongly adsorbed in the interlayer spaces of soil clays, particularly vermiculite. We have investigated the microscopic structure of an aqueous suspension of vermiculite clay over a wide length scale (1-1000 Å) by small-angle X-ray scattering. We determined the effect of the adsorption behavior of Cs(+) on the structural changes in the clay. It was found that the abruption of the clay sheets was induced by the localization of Cs(+) at the interlayer. This work provides important information for predicting the environmental fate of radioactive Cs in polluted areas, and for developing methods to extract Cs from the soil and reduce radioactivity.

| S-EPMC4192615 | biostudies-literature

Structural and magnetic properties of core-shell Au/Fe3O4 nanoparticles.

Project description:We present a systematic study of core-shell Au/Fe3O4 nanoparticles produced by thermal decomposition under mild conditions. The morphology and crystal structure of the nanoparticles revealed the presence of Au core of d?=?(6.9?±?1.0) nm surrounded by Fe3O4 shell with a thickness of ~3.5?nm, epitaxially grown onto the Au core surface. The Au/Fe3O4 core-shell structure was demonstrated by high angle annular dark field scanning transmission electron microscopy analysis. The magnetite shell grown on top of the Au nanoparticle displayed a thermal blocking state at temperatures below TB?=?59?K and a relaxed state well above TB. Remarkably, an exchange bias effect was observed when cooling down the samples below room temperature under an external magnetic field. Moreover, the exchange bias field (HEX) started to appear at T~40?K and its value increased by decreasing the temperature. This effect has been assigned to the interaction of spins located in the magnetically disordered regions (in the inner and outer surface of the Fe3O4 shell) and spins located in the ordered region of the Fe3O4 shell.

| S-EPMC5292710 | biostudies-literature

Development of Cuboidal KNbO3@α-Fe2O3 Hybrid Nanostructures for Improved Photocatalytic and Photoelectrocatalytic Applications.

Project description:Monophasic and hybrid nanostructures of KNbO3 and α-Fe2O3 have been prepared using a hydrothermal process for photoelectrocatalytic and photocatalytic applications. Powder X-ray diffraction studies showed the formation of KNbO3, α-Fe2O3, and KNbO3/α-Fe2O3 with average grain sizes of 18.3, 11.5, and 26.1 nm and Brunauer-Emmett-Teller (BET) specific surface areas of 4, 100, and 20 m2/gm, respectively. Under simulated solar irradiation, the as-prepared heterostructure shows enhanced photoelectrocatalytic oxygen evolution reaction (OER) activity compared to pristine KNbO3 and α-Fe2O3. Significant photocatalytic activity of as-synthesized KNbO3/α-Fe2O3 heterostructure photocatalyst was obtained for removal of methylene blue organic dye under visible light, and the percentage activity was found to be 11, 49, and 89% for KNbO3, α-Fe2O3, and KNbO3/α-Fe2O3 photocatalysts, respectively. The dielectric constant was found to be 250.2, 65.2, and 251.5 for KNbO3, α-Fe2O3, and KNbO3/α-Fe2O3 heterostructure, respectively, at 50 °C and 500 kHz frequency.

| S-EPMC7439387 | biostudies-literature

Sol-gel synthesis of DyCrO3 and 10% Fe-doped DyCrO3 nanoparticles with enhanced photocatalytic hydrogen production abilities.

Project description:DyCrO3 and 10% Fe-doped DyCrO3 nanoparticles have been synthesized using a sol-gel method to investigate their performance in photocatalytic hydrogen production from water. The synthesized nanoparticles have been characterized by performing X-ray diffraction, energy dispersive X-ray spectroscopy and UV-visible spectrophotometric measurements. In addition, field emission scanning electron microscopy has been performed to observe their size and shape. The Fe-doped DyCrO3 nanoparticles show a significantly smaller band gap of 2.45 eV compared to the band gap of 2.82 eV shown by the DyCrO3 nanoparticles. The Fe-doped DyCrO3 nanoparticles show better photocatalytic activity in the degradation of rhodamine B (RhB) compared to the photocatalytic activity shown by both the DyCrO3 and Degussa P25 titania nanoparticles. The recycling and reuse of Fe-doped DyCrO3 four times for the photo-degradation of RhB shows that Fe-doped DyCrO3 is a stable and reusable photocatalyst. To evaluate the extent of the photocatalytic hydrogen production ability of the synthesized nanoparticles, a theoretical model has been developed to determine their "absorptance", a measure of the ability to absorb photons. Finally, 10% Fe-doped DyCrO3 proves itself to be an efficient photocatalyst as it demonstrated three times greater hydrogen production than Degussa P25.

| S-EPMC9079860 | biostudies-literature

Ultrasmall Fe2O3 nanoparticles/MoS2 nanosheets composite as high-performance anode material for lithium ion batteries.

Project description:Coupling ultrasmall Fe2O3 particles (~4.0 nm) with the MoS2 nanosheets is achieved by a facile method for high-performance anode material for Li-ion battery. MoS2 nanosheets in the composite can serve as scaffolds, efficiently buffering the large volume change of Fe2O3 during charge/discharge process, whereas the ultrasmall Fe2O3 nanoparticles mainly provide the specific capacity. Due to bigger surface area and larger pore volume as well as strong coupling between Fe2O3 particles and MoS2 nanosheets, the composite exhibits superior electrochemical properties to MoS2, Fe2O3 and the physical mixture Fe2O3+MoS2. Typically, after 140 cycles the reversible capacity of the composite does not decay, but increases from 829 mA h g-1 to 864 mA h g-1 at a high current density of 2 A g-1. Thus, the present facile strategy could open a way for development of cost-efficient anode material with high-performance for large-scale energy conversion and storage systems.

| S-EPMC5316998 | biostudies-literature