Browse
Submit Data
Databases
API
Help

Dataset Information

33 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhancing laser beam performance by interfering intense laser beamlets.

ABSTRACT: Increasing the laser energy absorption into energetic particle beams represents a longstanding quest in intense laser-plasma physics. During the interaction with matter, part of the laser energy is converted into relativistic electron beams, which are the origin of secondary sources of energetic ions, γ-rays and neutrons. Here we experimentally demonstrate that using multiple coherent laser beamlets spatially and temporally overlapped, thus producing an interference pattern in the laser focus, significantly improves the laser energy conversion efficiency into hot electrons, compared to one beam with the same energy and nominal intensity as the four beamlets combined. Two-dimensional particle-in-cell simulations support the experimental results, suggesting that beamlet interference pattern induces a periodical shaping of the critical density, ultimately playing a key-role in enhancing the laser-to-electron energy conversion efficiency. This method is rather insensitive to laser pulse contrast and duration, making this approach robust and suitable to many existing facilities.

SUBMITTER: Morace A

PROVIDER: S-EPMC6611939 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Focussing Protons from a Kilojoule Laser for Intense Beam Heating using Proximal Target Structures.

Project description:Proton beams driven by chirped pulse amplified lasers have multi-picosecond duration and can isochorically and volumetrically heat material samples, potentially providing an approach for creating samples of warm dense matter with conditions not present on Earth. Envisioned on a larger scale, they could heat fusion fuel to achieve ignition. We have shown in an experiment that a kilojoule-class, multi-picosecond short pulse laser is particularly effective for heating materials. The proton beam can be focussed via target design to achieve exceptionally high flux, important for the applications mentioned. The laser irradiated spherically curved diamond-like-carbon targets with intensity 4?×?1018?W/cm2, producing proton beams with 3?MeV slope temperature. A Cu witness foil was positioned behind the curved target, and the gap between was either empty or spanned with a structure. With a structured target, the total emission of Cu K? fluorescence was increased 18 fold and the emission profile was consistent with a tightly focussed beam. Transverse proton radiography probed the target with ps order temporal and 10 ?m spatial resolution, revealing the fast-acting focussing electric field. Complementary particle-in-cell simulations show how the structures funnel protons to the tight focus. The beam of protons and neutralizing electrons induce the bright K? emission observed and heat the Cu to 100?eV.

| S-EPMC7287069 | biostudies-literature

Intense laser interaction with micro-bars.

Project description:Intense laser fields interact very differently with micrometric rough surfaces than with flat objects. The interaction features high laser energy absorption and increased emission of MeV electrons, ions, and of hard x-rays. In this work, we irradiated isolated, translationally-symmetric objects in the form of micrometric Au bars. The interaction resulted in the emission of two forward-directed electron jets having a small opening angle, a narrow energy spread in the MeV range, and a positive angle to energy correlation. Our numerical simulations show that following ionization, those electrons that are pulled into vacuum near the object's edge, remain in-phase with the laser pulse for long enough so that the Lorentz force they experience drive them around the object's edge. After these electrons pass the object, they form attosecond duration bunches and interact with the laser field over large distances in vacuum in confined volumes that trap and accelerate them within a narrow range of momentum. The selectivity in energy of the interaction, its directionality, and the preservation of the attosecond duration of the electron bunches over large distances, offer new means for designing future laser-based light sources.

| S-EPMC10696094 | biostudies-literature

Enhancing Double-Beam Laser Tweezers Raman Spectroscopy (LTRS) for the Photochemical Study of Individual Airborne Microdroplets.

Project description:A new device and methodology for vertically coupling confocal Raman microscopy with optical tweezers for the in situ physico- and photochemical studies of individual microdroplets (Ø ≤ 10 µm) levitated in air is presented. The coupling expands the spectrum of studies performed with individual particles using laser tweezers Raman spectroscopy (LTRS) to photochemical processes and spatially resolved Raman microspectroscopy on airborne aerosols. This is the first study to demonstrate photochemical studies and Raman mapping on optically levitated droplets. By using this configuration, photochemical reactions in aerosols of atmospheric interest can be studied on a laboratory scale under realistic conditions of gas-phase composition and relative humidity. Likewise, the distribution of photoproducts within the drop can also be observed with this setup. The applicability of the coupling system was tested by studying the photochemical behavior of microdroplets (5 µm < Ø < 8 µm) containing an aqueous solution of sodium nitrate levitated in air and exposed to narrowed UV radiation (254 ± 25 nm). Photolysis of the levitated NaNO3 microdroplets presented photochemical kinetic differences in comparison with larger NaNO3 droplets (40 µm < Ø < 80 µm), previously photolyzed using acoustic traps, and heterogeneity in the distribution of the photoproducts within the drop.

| S-EPMC6766935 | biostudies-literature

Intense ultraviolet-visible-infrared full-spectrum laser.

Project description:A high-brightness ultrabroadband supercontinuum white laser is desirable for various fields of modern science. Here, we present an intense ultraviolet-visible-infrared full-spectrum femtosecond laser source (with 300-5000 nm 25 dB bandwidth) with 0.54 mJ per pulse. The laser is obtained by sending a 3.9 μm, 3.3 mJ mid-infrared pump pulse into a cascaded architecture of gas-filled hollow-core fiber, a bare lithium niobate crystal plate, and a specially designed chirped periodically poled lithium niobate crystal, under the synergic action of second and third order nonlinearities such as high harmonic generation and self-phase modulation. This full-spectrum femtosecond laser source can provide a revolutionary tool for optical spectroscopy and find potential applications in physics, chemistry, biology, material science, industrial processing, and environment monitoring.

| S-EPMC10444876 | biostudies-literature

Jitter-free 40-fs 375-keV electron pulses directly accelerated by an intense laser beam and their application to direct observation of laser pulse propagation in a vacuum.

Project description:We report the generation of ultrashort bright electron pulses directly driven by irradiating a solid target with intense femtosecond laser pulses. The duration of electron pulses after compression by a phase rotator composed of permanent magnets was measured as 89 fs via the ponderomotive scattering of electron and laser pulses, which were almost at the compression limit due to the dispersion of the electron optics. The electron pulse compression system consisting of permanent magnets enabled extremely high timing stability between the laser pulse and electron pulse. The long-term RMS arrival time drift was below 14 fs in 4 h, which was limited by the resolution of the current setup. Because there was no time-varying field to generate jitter, the timing jitter was essentially reduced to zero. To demonstrate the capability of the ultrafast electron pulses, we used them to directly visualize laser pulse propagation in a vacuum and perform 2D mapping of the electric fields generated by low-density plasma in real time.

| S-EPMC7683604 | biostudies-literature

Intense multicycle THz pulse generation from laser-produced nanoplasmas.

Project description:We present a novel scheme to obtain robust, narrowband, and tunable THz emission using a nano-dimensional overdense plasma target, irradiated by two counter-propagating detuned laser pulses. So far, no narrowband THz sources with a field strength of GV/m-level have been reported from laser-solid interaction (mostly half-or single-cycle THz pulses with only broadband frequency spectrum). From two- and three-dimensional particle-in-cell simulations, we find that the strong plasma current generated by the beat ponderomotive force in the colliding region, produces beat-frequency radiation in the THz range. Here we report intense THz pulses [Formula: see text]THz) with an unprecedentedly high peak field strength of 11.9 GV/m and spectral width [Formula: see text], which leads to a regime of an extremely bright narrowband THz source of TW/cm[Formula: see text], suitable for various ambitious applications.

| S-EPMC10015041 | biostudies-literature

Design and Manufacturing Method of Fundamental Beam Mode Shaper for Adapted Laser Beam Profile in Laser Material Processing.

Project description:Many laser material processing applications require an optimized beam profile, e.g., ring shape or Top-Hat profiles with homogeneous intensity distribution. In this study, we show a beam shaping concept leading to a phase shifting element with binary height profile as well as a very low periodicity with near diffraction limited spot size. Further advantages of so-called Fundamental Beam Mode Shaping (FBS) elements are the simplified handling, and a high efficiency and homogeneity. The calculated height profile of FBS elements are transferred in fused silica substrates using a combination of microlithography technologies, reactive ion etching (RIE) and ion beam etching (IBE). The experiments demonstrated a linear relation between the etching depth after RIE and IBE. The optical evaluation of the manufactured FBS beam mode shaper confirmed the presented concept design.

| S-EPMC6678773 | biostudies-literature

Laser streaming: Turning a laser beam into a flow of liquid.

Project description:Transforming a laser beam into a mass flow has been a challenge both scientifically and technologically. We report the discovery of a new optofluidic principle and demonstrate the generation of a steady-state water flow by a pulsed laser beam through a glass window. To generate a flow or stream in the same path as the refracted laser beam in pure water from an arbitrary spot on the window, we first fill a glass cuvette with an aqueous solution of Au nanoparticles. A flow will emerge from the focused laser spot on the window after the laser is turned on for a few to tens of minutes; the flow remains after the colloidal solution is completely replaced by pure water. Microscopically, this transformation is made possible by an underlying plasmonic nanoparticle-decorated cavity, which is self-fabricated on the glass by nanoparticle-assisted laser etching and exhibits size and shape uniquely tailored to the incident beam profile. Hydrophone signals indicate that the flow is driven via acoustic streaming by a long-lasting ultrasound wave that is resonantly generated by the laser and the cavity through the photoacoustic effect. The principle of this light-driven flow via ultrasound, that is, photoacoustic streaming by coupling photoacoustics to acoustic streaming, is general and can be applied to any liquid, opening up new research and applications in optofluidics as well as traditional photoacoustics and acoustic streaming.

| S-EPMC5617372 | biostudies-literature

Plasma density limits for hole boring by intense laser pulses.

Project description:High-power lasers in the relativistic intensity regime with multi-picosecond pulse durations are available in many laboratories around the world. Laser pulses at these intensities reach giga-bar level radiation pressures, which can push the plasma critical surface where laser light is reflected. This process is referred to as the laser hole boring (HB), which is critical for plasma heating, hence essential for laser-based applications. Here we derive the limit density for HB, which is the maximum plasma density the laser can reach, as a function of laser intensity. The time scale for when the laser pulse reaches the limit density is also derived. These theories are confirmed by a series of particle-in-cell simulations. After reaching the limit density, the plasma starts to blowout back toward the laser, and is accompanied by copious superthermal electrons; therefore, the electron energy can be determined by varying the laser pulse length.

| S-EPMC5809619 | biostudies-literature

Intense attosecond pulses carrying orbital angular momentum using laser plasma interactions.

Project description:Light beams with helical phase-fronts are known to carry orbital angular momentum (OAM) and provide an additional degree of freedom to beams of coherent light. While OAM beams can be readily derived from Gaussian laser beams with phase plates or gratings, this is far more challenging in the extreme ultra-violet (XUV), especially for the case of high XUV intensity. Here, we theoretically and numerically demonstrate that intense surface harmonics carrying OAM are naturally produced by the intrinsic dynamics of a relativistically intense circularly-polarized Gaussian beam (i.e. non-vortex) interacting with a target at normal incidence. Relativistic surface oscillations convert the laser pulses to intense XUV harmonic radiation via the well-known relativistic oscillating mirror mechanism. We show that the azimuthal and radial dependence of the harmonic generation process converts the spin angular momentum of the laser beam to orbital angular momentum resulting in an intense attosecond pulse (or pulse train) with OAM.

| S-EPMC6895158 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data