Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Polydimethylsiloxane/Nanodiamond Composite Sponge for Enhanced Mechanical or Wettability Performance.

ABSTRACT: Polydimethylsiloxane (PDMS) is widely utilized in material science, chemical engineering, and environmental science due to its excellent properties. By utilizing fillers, so-called composite materials can be obtained with enhanced mechanical, wettability, or thermal conductivity performance. Here, we present a simple, cost-effective approach to vary either the mechanical properties (Young's modulus) or surface wettability of bulk PDMS and PDMS sponges simply by adding nanodiamond filler with different surface terminations, either oxidized (oND) or hydrogenated (reduced, rND) nanodiamond. Minuscule amounts of oxidized nanodiamond particles as filler showed to benefit the compressive Young's modulus of composite sponges with up to a 52% increase in its value, while the wettability of composite sponges was unaffected. In contrast, adding reduced nanodiamond particles to PDMS yielded inclined water contact angles on the PDMS/nanodiamond composite sponges. Finally, we show that the PDMS/rND composites are readily utilized as an absorbent for oil/water separation problems. This signifies that the surface termination of the ND particle has a crucial effect on the performance of the composite.

SUBMITTER: Zhao X

PROVIDER: S-EPMC6631953 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Stimuli-Responsive Nanodiamond-Polyelectrolyte Composite Films.

Project description:Nanodiamonds (NDs) can considerably improve the mechanical and thermal properties of polymeric composites. However, the tendency of NDs to aggregate limits the potential of these non-toxic, mechanically- and chemically-robust nanofillers. In this work, tough, flexible, and stimuli-responsive polyelectrolyte films composed of cross-linked poly(butyl acrylate-co-dimethylaminoethyl methacrylate) (P(BA-co-DMAEMA)) were prepared by photopolymerization. The effects of the added carboxylate-functionalized NDs on their mechanical and stimuli-responsive properties were studied. When the negatively charged NDs were added to the polymerization media directly, the mechanical properties of the films changed only slightly, because of the uneven distribution of the aggregated NDs in the films. In order to disperse and distribute the NDs more evenly, a prepolymerized polycation block copolymer complexing agent was used during the photopolymerization process. This approach improved the mechanical properties of the films and enhanced their thermally-induced, reversible phase-transition behavior.

| S-EPMC7182812 | biostudies-literature

Electrorheological Properties of Polydimethylsiloxane/TiO2-Based Composite Elastomers.

Project description:Electrorheological elastomers based on polydimethylsiloxane filled with hydrated titanium dioxide with a particle size of 100-200 nm were obtained by polymerization of the elastomeric matrix, either in the presence, or in the absence, of an external electric field. The viscoelastic and dielectric properties of the obtained elastomers were compared. Analysis of the storage modulus and loss modulus of the filled elastomers made it possible to reveal the influence of the electric field on the Payne effect in electrorheological elastomers. The elastomer vulcanized in the electric field showed high values of electrorheological sensitivity, 250% for storage modulus and 1100% for loss modulus. It was shown, for the first time, that vulcanization of filled elastomers in the electric field leads to a significant decrease in the degree of crosslinking in the elastomer. This effect should be taken into account in the design of electroactive elastomeric materials.

| S-EPMC7569977 | biostudies-literature

Multifunctional Slippery Polydimethylsiloxane/Carbon Nanotube Composite Strain Sensor with Excellent Liquid Repellence and Anti-Icing/Deicing Performance.

Project description:In this paper, a multifunctional slippery polydimethylsiloxane/carbon nanotube composite strain sensor (SPCCSS) is prepared using a facile template method. Benefitting from the slippery surface, the SPCCSS shows excellent liquid repellence properties, which can repel various liquids such as oil, cola, yogurt, hot water and some organic solvents. Meanwhile, the SPCCSS has a large strain sensing range (up to 100%), good sensitivity (GF = 3.3) and stable response with 500 cyclic stretches under 20% strain. Moreover, it is also demonstrated that the SPCCSS displays outstanding corrosion resistance (from pH = 1 to pH = 14) and anti-icing (8 min at -20 °C)/photothermal deicing (104 s with NIR power density of 1 W/cm2) properties, broadening its application in extreme acid, alkali and low-temperature conditions. Therefore, the multifunctional SPCCSS with the liquid repellence, anti-corrosion, and anti-icing/deicing properties has potential applications in wearable human motion monitoring tools under complex harsh environments.

| S-EPMC8838627 | biostudies-literature

High Nanodiamond Content-PCL Composite for Tissue Engineering Scaffolds.

Project description:Multifunctional scaffolds are becoming increasingly important in the field of tissue engineering. In this research, a composite material is developed using polycaprolactone (PCL) and detonation nanodiamond (ND) to take advantage of the unique properties of ND and the biodegradability of PCL polymer. Different ND loading concentrations are investigated, and the physicochemical properties of the composites are characterized. ND-PCL composite films show a higher surface roughness and hydrophilicity than PCL alone, with a slight decrease in tensile strength and a significant increase in degradation. Higher loading of ND also shows a higher osteoblast adhesion than the PCL alone sample. Finally, we show that the ND-PCL composites are successfully extruded to create a 3D scaffold demonstrating their potential as a composite material for tissue regeneration.

| S-EPMC7279315 | biostudies-literature

Controlled Methodology for Development of a Polydimethylsiloxane-Polytetrafluoroethylene-Based Composite for Enhanced Chemical Resistance: A Structure-Property Relationship Study.

Project description:Polydimethylsiloxane (PDMS) polymers are highly appreciated materials that are broadly applied in several industries, from baby bottle nipples to rockets. Momentive researchers are continuously working to understand and expand the scope of PDMS-based materials. Fluorofunctional PDMS has helped the world to apply in specialty applications. Efforts are taken to develop such siloxane-fluoropolymer composite materials with good thermal, solvent, and chemical resistance performances. We leveraged inherently flexible PDMS as the model matrix, whereas polytetrafluoroethylene (PTFE) was used as the additive to impart the functional benefits, offering great value in comparison to the individual polymers. The composites were made at three different mixing temperatures, that is, 0-35 °C, and different loadings of PTFE, that is, 0.5-8% (w/w), were selected as the model condition. A strong dependency of the mixing temperature against the performance attributes of the developed composites was noted. Mechanical and thermal stability of the composites were evaluated along with optical properties. X-ray diffraction demonstrated the change in the crystallite size of the PTFE particles as a function of processing temperature. Compared to the phase II crystallite structure of the PTFE, the fibrils formed in phase IV imparted a better reinforcing capability toward the PDMS matrix. A synergistic balance between higher filler loading and mechanical properties of the composite can be achieved by doping the formulation with short-chain curable PDMS, with 238% increment of tensile strength at 8 wt % PTFE loading when compared to the control sample. The learning was extended to check the applicability of doping such PTFE powder in commercial liquid silicone rubber (LSR). In the window of study, the formulated LSR demonstrated improved mechanical properties with additional functional benefits like resistance toward engine oil and other chemical solvents.

| S-EPMC7482242 | biostudies-literature

Mechanical Durability of Low Ice Adhesion Polydimethylsiloxane Surfaces.

Project description:Elastomeric surfaces and oil-infused elastic surfaces reveal low ice adhesion, in part because of their deformability. However, these soft surfaces might jeopardize their mechanical durability. In this work, we analyzed the mechanical durability of elastic polydimethylsiloxane (PDMS) surfaces with different balances between elasticity and deicing performances. The durability was studied in terms of shear/tensile ice adhesion strength before and after different wear tests. These tests consisted of abrasion/erosion cycles using standard procedures aimed to reproduce different environmental wearing agents. The main objective is to evaluate if our PDMS surfaces can become long-lasting solutions for ice removal in real conditions. We found that our elastic surfaces show excellent durability. After the wear tests, the ice adhesion strength values remained low or even unaltered. Although the oil-infused PDMS surface was the softest one, it presented considerable durability and excellent low ice adhesion, being a promising solution.

| S-EPMC9219074 | biostudies-literature

Nanodiamond-enhanced MRI via in situ hyperpolarization.

Project description:Nanodiamonds are of interest as nontoxic substrates for targeted drug delivery and as highly biostable fluorescent markers for cellular tracking. Beyond optical techniques, however, options for noninvasive imaging of nanodiamonds in vivo are severely limited. Here, we demonstrate that the Overhauser effect, a proton-electron polarization transfer technique, can enable high-contrast magnetic resonance imaging (MRI) of nanodiamonds in water at room temperature and ultra-low magnetic field. The technique transfers spin polarization from paramagnetic impurities at nanodiamond surfaces to 1H spins in the surrounding water solution, creating MRI contrast on-demand. We examine the conditions required for maximum enhancement as well as the ultimate sensitivity of the technique. The ability to perform continuous in situ hyperpolarization via the Overhauser mechanism, in combination with the excellent in vivo stability of nanodiamond, raises the possibility of performing noninvasive in vivo tracking of nanodiamond over indefinitely long periods of time.

| S-EPMC5414045 | biostudies-literature

Enhanced Wave Absorption and Mechanical Properties of Cobalt Sulfide/PVDF Composite Materials.

Project description:A cobalt sulfide/PVDF(Polyvinylidene Fluoride) composite was prepared by a simple blending method, and the microstructure of the composite was investigated through X-ray diffraction, scanning electron microscopy, and field emission scanning electron microscopy. Increased absorption properties at frequencies ranging from 2 GHz to 18 GHz were studied, and the mechanical properties were investigated via tensile tests and finite element method simulations. The results indicated that the cobalt sulfide/PVDF composites exhibited strong microwave absorption intensities (-43 dB at 6.6 GHz) with a low filler loading (5.0 wt%). The elastic modulus increased with the cobalt sulfide mass fraction. Cobalt sulfide could improve the mechanical properties of the composite, especially in the lengthwise direction.

| S-EPMC6642107 | biostudies-literature

Enhanced Silk Fibroin/Sericin Composite Film: Preparation, Mechanical Properties and Mineralization Activity.

Project description:The periosteum plays an important role in bone formation and reconstruction. One of the reasons for the high failure rate of bone transplantation is the absence of the periosteum. Silk fibroin (SF) and silk sericin (SS) have excellent biocompatibility and physicochemical properties, which have amazing application prospects in bone tissue engineering, but lacked mechanical properties. We developed a series of SF/SS composite films with improved mechanical properties using boiling water degumming, which caused little damage to SF molecular chains to retain larger molecules. The Fourier transform infrared spectroscopy and X-ray diffraction results showed that there were more β-sheets in SF/SS films than in Na2CO3 degummed SF film, resulting in significantly improved breaking strength and toughness of the composite films, which were increased by approximately 1.3 and 1.7 times, respectively. The mineralization results showed that the hydroxyapatite (HAp) deposition rate on SF/SS composite films was faster than that on SF film. The SF/SS composite films effectively regulated the nucleation, growth and aggregation of HAp-like minerals, and the presence of SS accelerated the early mineralization of SF-based materials. These composite films may be promising biomaterials in the repair and regeneration of periosteum.

| S-EPMC9227074 | biostudies-literature

Ultralightweight and 3D Squeezable Graphene-Polydimethylsiloxane Composite Foams as Piezoresistive Sensors.

Project description:The growing demand for flexible, ultrasensitive, squeezable, skin-mountable, and wearable sensors tailored to the requirements of personalized health-care monitoring has fueled the necessity to explore novel nanomaterial-polymer composite-based sensors. Herein, we report a sensitive, 3D squeezable graphene-polydimethylsiloxane (PDMS) foam-based piezoresistive sensor realized by infusing multilayered graphene nanoparticles into a sugar-scaffolded porous PDMS foam structure. Static and dynamic compressive strain testing of the resulting piezoresistive foam sensors revealed two linear response regions with an average gauge factor of 2.87-8.77 over a strain range of 0-50%. Furthermore, the dynamic stimulus-response revealed the ability of the sensors to effectively track dynamic pressure up to a frequency of 70 Hz. In addition, the sensors displayed a high stability over 36000 cycles of cyclic compressive loading and 100 cycles of complete human gait motion. The 3D sensing foams were applied to experimentally demonstrate accurate human gait monitoring through both simulated gait models and real-time gait characterization experiments. The real-time gait experiments conducted demonstrate that the information of the pressure profile obtained at three locations in the shoe sole could not only differentiate between different kinds of human gaits including walking and running but also identify possible fall conditions. This work also demonstrates the capability of the sensors to differentiate between foot anatomies, such as a flat foot (low central arch) and a medium arch foot, which is biomechanically more efficient. Furthermore, the sensors were able to sense various basic joint movement responses demonstrating their suitability for personalized health-care applications.

| S-EPMC6767363 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data