Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Thermoelectric power generation: from new materials to devices.

ABSTRACT: Thermoelectric technology offers the opportunity of direct conversion between heat and electricity, and new and exciting materials that can enable this technology to deliver higher efficiencies have been developed in recent years. This mini-review covers the most promising advances in thermoelectric materials as they pertain to their potential in being implemented in devices and modules with an emphasis on thermoelectric power generation. Classified into three groups in terms of their operating temperature, the thermoelectric materials that are most likely to be used in future devices are briefly discussed. We summarize the state-of-the-art thermoelectric modules/devices, among which nanostructured PbTe modules are particularly highlighted. At the end, key issues and the possible strategies that can help thermoelectric power generation technology move forward are considered. This article is part of a discussion meeting issue 'Energy materials for a low carbon future'.

SUBMITTER: Tan G

PROVIDER: S-EPMC6635637 | biostudies-literature | 2019 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Thermoelectric power generation: from new materials to devices.

Tan Gangjian G Ohta Michihiro M Kanatzidis Mercouri G MG

Philosophical transactions. Series A, Mathematical, physical, and engineering sciences 20190708 2152

Thermoelectric technology offers the opportunity of direct conversion between heat and electricity, and new and exciting materials that can enable this technology to deliver higher efficiencies have been developed in recent years. This mini-review covers the most promising advances in thermoelectric materials as they pertain to their potential in being implemented in devices and modules with an emphasis on thermoelectric power generation. Classified into three groups in terms of their operating ...[more]

PMID: 31280713

Similar Datasets

Charge transfer engineering to achieve extraordinary power generation in GeTe-based thermoelectric materials.

Project description:By the fine manipulation of the exceptional long-range germanium-telluride (Ge─Te) bonding through charge transfer engineering, we have achieved exceptional thermoelectric (TE) and mechanical properties in lead-free GeTe. This chemical bonding mechanism along with a semiordered zigzag nanostructure generates a notable increase of the average zT to a record value of ~1.73 in the temperature range of 323 to 773 K with ultrahigh maximum zT ~ 2.7. In addition, we significantly enhanced the Vickers microhardness numbers (Hv) to an extraordinarily high value of 247 Hv and effectively eliminated the thermal expansion fluctuation at the phase transition, which was problematic for application, by the present charge transfer engineering process and concomitant formation of microstructures. We further fabricated a single-leg TE generator and obtained a conversion efficiency of ~13.4% at the temperature difference of 463 K on a commercial instrument, which is located at the pinnacle of TE conversion.

| S-EPMC10132743 | biostudies-literature

Hybrid carbon thermal interface materials for thermoelectric generator devices.

Project description:Thermal interface materials (TIMs) are extensively used in electronic devices as efficient heat transfer materials. We fabricated all-carbon TIMs by hybridizing single-wall carbon nanotubes (SWCNTs) with graphite and demonstrated their performance by applying them to a thermoelectric generator (TEG) device. The hybrid carbon TIM exhibited maximum thermal conductivity when the SWCNT content was near 10 wt%. The TIM thermal contact resistance measured by a home-made calorimeter setup was 2.19 × 10-4 m2K/W, which did not vary with temperature but decreased with applied pressure. Post-treatment of the TIM with a silane coupling agent further reduced the TIM thermal contact resistance by 30%. When the TIM was placed between a TEG device and a copper heat reservoir, the TEG output power increased with the temperature difference across the TEG and applied pressure. Moreover, the post-treatment of the TIM enhanced the output power of the TEG device by up to 18.5%. This work provides a simple and effective pathway towards a carbon-based TIM that can be applied to a high temperature TEG.

| S-EPMC7606529 | biostudies-literature

n-type thermoelectric material Mg2Sn0.75Ge0.25 for high power generation.

Project description:Thermoelectric power generation is one of the most promising techniques to use the huge amount of waste heat and solar energy. Traditionally, high thermoelectric figure-of-merit, ZT, has been the only parameter pursued for high conversion efficiency. Here, we emphasize that a high power factor (PF) is equivalently important for high power generation, in addition to high efficiency. A new n-type Mg2Sn-based material, Mg2Sn0.75Ge0.25, is a good example to meet the dual requirements in efficiency and output power. It was found that Mg2Sn0.75Ge0.25 has an average ZT of 0.9 and PF of 52 μW⋅cm(-1)⋅K(-2) over the temperature range of 25-450 °C, a peak ZT of 1.4 at 450 °C, and peak PF of 55 μW⋅cm(-1)⋅K(-2) at 350 °C. By using the energy balance of one-dimensional heat flow equation, leg efficiency and output power were calculated with Th = 400 °C and Tc = 50 °C to be of 10.5% and 6.6 W⋅cm(-2) under a temperature gradient of 150 °C⋅mm(-1), respectively.

| S-EPMC4371904 | biostudies-literature

High Power Factor of Ag2Se/Ag/Nylon Composite Films for Wearable Thermoelectric Devices.

Project description:A flexible thermoelectric device has been considered as a competitive candidate for powering wearable electronics. Here, we fabricated an n-type Ag2Se/Ag composite film on a flexible nylon substrate using vacuum-assisted filtration and a combination of cold and hot pressing. By optimising the Ag/Se ratio and the sequential addition and reaction time of AA, an excellent power factor of 2277.3 μW∙m-1 K-2 (corresponding to a ZT of ~0.71) at room temperature was achieved. In addition, the Ag2Se/Ag composite film exhibits remarkable flexibility, with only 4% loss and 10% loss in electrical conductivity after being bent around a rod of 4 mm radius for 1000 cycles and 2000 cycles, respectively. A seven-leg flexible thermoelectric device assembled with the optimised film demonstrates a voltage of 19 mV and a maximum power output of 3.48 μW (corresponding power density of 35.5 W m-2) at a temperature difference of 30 K. This study provides a potential path to design improved flexible TE devices.

| S-EPMC9737951 | biostudies-literature

Thermoelectric and power generation of 2D structured pieces of graphene-nanodiamonds nanocomposite.

Project description:Recently, the ultrafine 2D structured nanocomposite of graphene (Gr)-nanodiamonds (NDs) produced by a microwave-assisted chemical route was found to have attractive structural properties. This new 2D structured nanocomposite may be employed for a wide spectrum of applications including thermoelectricity (TE) applications. It is well established that TE materials should be highly effective to be used for designing operative devices for powering or cooling small devices. To fulfill such an objective, the functional TE material should possess a high-power factor and low thermal conductivity. In this study, NDs were successfully integrated into Gr with a magnificent structural alteration to the Gr layers/sheets. This structural modification was found to impact the TE final outcome above and below room temperature (RT). The obtained results showed that at 215 K the power factor value was increased from 4 μW m-1 K-2 for the pure Gr to ∼20 μW m-1 K-2 for the Gr-NDs nanocomposite. At higher T, e.g. 365 K, these values slightly decreased, but with clear superiority for the Gr-NDs nanocomposite. The thermal conductivity of the Gr-NDs nanocomposite was significantly reduced to ∼12% of that of the pure Gr, which could reflect a significant enhancement in the value of the figure of merit by >45 times. Furthermore, the output power generated by a single small leg module made of the Gr-NDs nanocomposite was measured and found to be measurable. The obtained values are still relatively low for practical application, but this newly produced material has great potential to be further developed for TE applications.

| S-EPMC10472211 | biostudies-literature

Towards tellurium-free thermoelectric modules for power generation from low-grade heat.

Project description:Thermoelectric technology converts heat into electricity directly and is a promising source of clean electricity. Commercial thermoelectric modules have relied on Bi2Te3-based compounds because of their unparalleled thermoelectric properties at temperatures associated with low-grade heat (<550 K). However, the scarcity of elemental Te greatly limits the applicability of such modules. Here we report the performance of thermoelectric modules assembled from Bi2Te3-substitute compounds, including p-type MgAgSb and n-type Mg3(Sb,Bi)2, by using a simple, versatile, and thus scalable processing routine. For a temperature difference of ~250 K, whereas a single-stage module displayed a conversion efficiency of ~6.5%, a module using segmented n-type legs displayed a record efficiency of ~7.0% that is comparable to the state-of-the-art Bi2Te3-based thermoelectric modules. Our work demonstrates the feasibility and scalability of high-performance thermoelectric modules based on sustainable elements for recovering low-grade heat.

| S-EPMC7892859 | biostudies-literature

Bismuth Telluride and Its Alloys as Materials for Thermoelectric Generation.

Project description:Bismuth telluride and its alloys are widely used as materials for thermoelectric refrigeration. They are also the best materials for use in thermoelectric generators when the temperature of the heat source is moderate. The dimensionless figure of merit, ZT, usually rises with temperature, as long as there is only one type of charge carrier. Eventually, though, minority carrier conduction becomes significant and ZT decreases above a certain temperature. There is also the possibility of chemical decomposition due to the vaporization of tellurium. Here we discuss the likely temperature dependence of the thermoelectric parameters and the means by which the composition may be optimized for applications above room temperature. The results of these theoretical predictions are compared with the observed properties of bismuth telluride-based thermoelements at elevated temperatures. Compositional changes are suggested for materials that are destined for generator modules.

| S-EPMC5453363 | biostudies-other

New materials and devices for preventing catheter-related infections.

Project description:Catheters are the leading source of bloodstream infections for patients in the intensive care unit (ICU). Comprehensive unit-based programs have proven to be effective in decreasing catheter-related bloodstream infections (CR-BSIs). ICU rates of CR-BSI higher than 2 per 1,000 catheter-days are no longer acceptable. The locally adapted list of preventive measures should include skin antisepsis with an alcoholic preparation, maximal barrier precautions, a strict catheter maintenance policy, and removal of unnecessary catheters. The development of new technologies capable of further decreasing the now low CR-BSI rate is a major challenge. Recently, new materials that decrease the risk of skin-to-vein bacterial migration, such as new antiseptic dressings, were extensively tested. Antimicrobial-coated catheters can prevent CR-BSI but have a theoretical risk of selecting resistant bacteria. An antimicrobial or antiseptic lock may prevent bacterial migration from the hub to the bloodstream. This review discusses the available knowledge about these new technologies.

| S-EPMC3170570 | biostudies-literature

Cu<sub>2</sub>Se-based thermoelectric cellular architectures for efficient and durable power generation.

Project description:Thermoelectric power generation offers a promising way to recover waste heat. The geometrical design of thermoelectric legs in modules is important to ensure sustainable power generation but cannot be easily achieved by traditional fabrication processes. Herein, we propose the design of cellular thermoelectric architectures for efficient and durable power generation, realized by the extrusion-based 3D printing process of Cu2Se thermoelectric materials. We design the optimum aspect ratio of a cuboid thermoelectric leg to maximize the power output and extend this design to the mechanically stiff cellular architectures of hollow hexagonal column- and honeycomb-based thermoelectric legs. Moreover, we develop organic binder-free Cu2Se-based 3D-printing inks with desirable viscoelasticity, tailored with an additive of inorganic Se82- polyanion, fabricating the designed topologies. The computational simulation and experimental measurement demonstrate the superior power output and mechanical stiffness of the proposed cellular thermoelectric architectures to other designs, unveiling the importance of topological designs of thermoelectric legs toward higher power and longer durability.

| S-EPMC8192747 | biostudies-literature

Stretchable photothermal membrane of NIR-II charge-transfer cocrystal for wearable solar thermoelectric power generation.

Project description:Harvesting sunlight into cost-effective electricity presents an enticing prospect for self-powered wearable applications. The photothermal materials with an extensive absorption are fundamental to achieve optical and thermal concentration of the sunlight for efficiency output electricity of wearable solar thermoelectric generators (STEGs). Here, we synthesize an organic charge-transfer (CT) cocrystal with a flat absorption from ultraviolet to second near-infrared region (200 to 1950 nanometers) and a high photothermal conversion efficiency (PCE) of 80.5%, which is introduced into polyurethane toward large-area nanofiber membrane by electrospinning technology. These corresponding membranes demonstrate a high PCE of 73.7% under the strain more than 80%. Sandwiched with carbon nanotube-based thermoelectric fibers, the membranes as stretchable solar absorbers of STEGs could supply a notably increase temperature gradient, processing a maximum output voltage density of 23.4 volts per square meter at 1:00 p.m. under sunlight. This strategy presents an important insight in heat management for wearable STEGs with a desired electricity output.

| S-EPMC10848765 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data