Browse
Submit Data
Databases
API
Help

Dataset Information

38 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fabrication of a Contamination-Free Interface between Graphene and TiO₂ Single Crystals.

ABSTRACT: The uniform and seamless interface between graphene and semiconductors, that is, without adsorbates or contamination in between, is of importance for optimizing the electronic and catalytic performances of the combined system. In this work, we try to synthesize graphene directly over atomically flat TiO₂ single-crystal surfaces using chemical vapor deposition (CVD) with acetylene as the carbon source. The facile synthetic conditions facilitate the formation of ultrathin polycrystalline graphene films with nanosize domains, while reasonably maintaining the terrace-and-step morphologies of the TiO₂ surfaces. The established recipe can thus lead to the construction of a contamination-free interface between graphene and reducible oxides and also provide a well-defined platform for further investigations into the physicochemical properties of the graphene-oxide complex system from an atomic/molecular level.

SUBMITTER: Liu H

PROVIDER: S-EPMC6640758 | biostudies-literature | 2016 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Fabrication of a Contamination-Free Interface between Graphene and TiO2 Single Crystals.

Liu Huihui H Zhu Dongbo D Shi Hong H Shao Xiang X

ACS omega 20160802 2

The uniform and seamless interface between graphene and semiconductors, that is, without adsorbates or contamination in between, is of importance for optimizing the electronic and catalytic performances of the combined system. In this work, we try to synthesize graphene directly over atomically flat TiO2 single-crystal surfaces using chemical vapor deposition (CVD) with acetylene as the carbon source. The facile synthetic conditions facilitate the formation of ultrathin polycrystallin ...[more]

PMID: 31457123

Similar Datasets

Strongly bound excitons in anatase TiO2 single crystals and nanoparticles.

Project description:Anatase TiO2 is among the most studied materials for light-energy conversion applications, but the nature of its fundamental charge excitations is still unknown. Yet it is crucial to establish whether light absorption creates uncorrelated electron-hole pairs or bound excitons and, in the latter case, to determine their character. Here, by combining steady-state angle-resolved photoemission spectroscopy and spectroscopic ellipsometry with state-of-the-art ab initio calculations, we demonstrate that the direct optical gap of single crystals is dominated by a strongly bound exciton rising over the continuum of indirect interband transitions. This exciton possesses an intermediate character between the Wannier-Mott and Frenkel regimes and displays a peculiar two-dimensional wavefunction in the three-dimensional lattice. The nature of the higher-energy excitations is also identified. The universal validity of our results is confirmed up to room temperature by observing the same elementary excitations in defect-rich samples (doped single crystals and nanoparticles) via ultrafast two-dimensional deep-ultraviolet spectroscopy.Here the authors combine steady-state angle-resolved photoemission spectroscopy, ellipsometry and ultrafast two-dimensional ultraviolet spectroscopy to examine the role of many-body correlations in anatase TiO2, revealing the existence of strongly bound excitons in single crystals and nanoparticles.

| S-EPMC5432032 | biostudies-literature

Fabrication of Graphene-Based TiO2@CeO2 and CeO2@TiO2 Core-Shell Heterostructures for Enhanced Photocatalytic Activity and Cytotoxicity.

Project description:Development of light-harvesting properties and inhibition of photogenerated charge carrier recombination are of paramount significance in the photocatalytic process. In the present work, we described the synthesis of core-shell heterostructures, which are composed of titanium oxide (TiO2) and cerium oxide (CeO2) deposited on a reduced graphene oxide (rGO) surface as a conductive substrate. Following the synthesis of ternary rGO-CeO2@TiO2 and rGO-TiO2@CeO2 nanostructures, their photocatalytic activity was investigated toward the degradation of rhodamine B dye as an organic pollutant under UV light irradiation. The obtained structures were characterized with high-resolution transmission electron microscopy, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, Brunauer-Emmett-Teller, X-ray photoelectron spectroscopy surface analysis, and UV-Vis spectroscopy. Various parameters including pH, catalyst dosage, temperature, and contact time were studied for photocatalysis optimization. Heterostructures showed considerable advantages because of their high surface area and superior photocatalytic performance. In contrast, rGO-CeO2@TiO2 showed the highest photocatalytic activity, which is attributed to the more effective electron-hole separation and quick suppression of charge recombination at core-shell phases. A biological assay of the prepared heterostructure was performed to determine the cytotoxicity against breast cancer cells (MCF-7) and demonstrated a very low survival rate at 7.65% of cells at the 17.5 mg mL-1 concentration of applied photocatalyst.

| S-EPMC9435054 | biostudies-literature

Intrinsic Enhancement of Dielectric Permittivity in (Nb + In) co-doped TiO2 single crystals.

Project description:The development of dielectric materials with colossal permittivity is important for the miniaturization of electronic devices and fabrication of high-density energy-storage devices. The electron-pinned defect-dipoles has been recently proposed to boost the permittivity of (Nb?+?In) co-doped TiO2 to 105. However, the follow-up studies suggest an extrinsic contribution to the colossal permittivity from thermally excited carriers. Herein, we demonstrate a marked enhancement in the permittivity of (Nb?+?In) co-doped TiO2 single crystals at sufficiently low temperatures such that the thermally excited carriers are frozen out and exert no influence on the dielectric response. The results indicate that the permittivity attains quadruple of that for pure TiO2. This finding suggests that the electron-pinned defect-dipoles add an extra dielectric response to that of the TiO2 host matrix. The results offer a novel approach for the development of functional dielectric materials with large permittivity by engineering complex defects into bulk materials.

| S-EPMC5509748 | biostudies-literature

Fabrication and investigation on Ag nanowires/TiO2 nanosheets/graphene hybrid nanocomposite and its water treatment performance.

Project description:In this paper, a novel Ag nanowires/TiO2 nanosheets/graphene nanocomposite was fabricated via a facile method of hydrothermal and calcination, and then the water treatment performance of it was evaluated for methylene blue (MB) and Escherichia coli removal. The as-prepared Ag nanowires/TiO2 nanosheets/graphene nanocomposite was characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), UV-visible diffuse reflection spectroscopy (DRS), molecular dynamics simulation, and gas chromatography-mass spectrometry (GC-MS). All data revealed that the Ag/TiO2/graphene nanocomposite showed a rich cell structure. The photocatalytic activity of Ag/TiO2/graphene nanocomposite is higher than those of pristine TiO2 nanosheets and TiO2/graphene nanocomposite. Under optimized conditions, the degradation efficiency was 100% and 71% for MB (30 mg/L) and with 10 mg Ag/TiO2/graphene nanocomposite under UV and visible light irradiation for 2 h, respectively. Ag/TiO2/graphene also showed excellent bacteria-killing activity. Meanwhile, the Ag/TiO2/graphene nanocomposite exhibited microstructure stability and cyclic stability. The water treatment performance was enhanced mainly attributed to the excellent adsorption performance of graphene and the high efficiency in separation of electron-hole pairs induced by the remarkable synergistic effects of TiO2, Ag, and graphene. On the basis of the experimental results, the photocatalytic mechanism and MB degradation mechanism were proposed. It is hoped that our work could avert the misleading message to the readership, hence offering a valuable source of reference on fabricating composite photocatalyst with stable microstructure and excellent performance for their application in the environment clean-up. Graphical abstract.

| S-EPMC7321717 | biostudies-literature

Hollow anatase TiO2 tetrakaidecahedral crystals with an active {001}/{110} redox interface toward high-performance photocatalytic activity.

Project description:The existence of the oxidation/reduction interface can promote the performance of a photocatalyst, due to its effect on the separation of photogenerated carriers and the surface reactivity. However, it is difficult to construct two sets of oxidation/reduction interfaces in a single crystal and compare their separation efficiency for photogenerated carriers. Introducing a high proportion of active facets into the co-exposed facets is even more challenging. Herein, a hollow anatase TiO2 tetrakaidecahedron (HTT) with two sets of oxidation/reduction interfaces ({001}/{101} and {001}/{110}) is synthesized by directional chemical etching. Theoretical and experimental results indicate that the {001}/{110} interface is a dominant oxidation/reduction interface, showing a better promotion on the separation of photogenerated carriers than the {001}/{101} interface. In the HTT, the ratio of dominant {001}/(110) is increased and the proportion of the active {110} facet is about 40% (generally about 15%). Therefore, the HTT shows excellent catalytic activity for photocatalytic reductive (hydrogen production) and oxidative (selective oxidation of sulfides) reactions. The HTT also demonstrates favorable photocatalytic activity for the cross-dehydrogenative coupling reaction, where both photogenerated electrons and photogenerated holes are involved, further verifying its high separation efficiency of photogenerated carriers and surface reactivity. This work provides an important guideline for developing advanced structures with a predetermined interface toward desired applications.

| S-EPMC10762932 | biostudies-literature

Kinetically Controlled Fabrication of Single-Crystalline TiO2 Nanobrush Architectures with High Energy {001} Facets.

Project description:This study demonstrates that precise control of nonequilibrium growth conditions during pulsed laser deposition (PLD) can be exploited to produce single-crystalline anatase TiO2 nanobrush architectures with large surface areas terminated with high energy {001} facets. The data indicate that the key to nanobrush formation is controlling the atomic surface transport processes to balance defect aggregation and surface-smoothing processes. High-resolution scanning transmission electron microscopy data reveal that defect-mediated aggregation is the key to TiO2 nanobrush formation. The large concentration of defects present at the intersection of domain boundaries promotes aggregation of PLD growth species, resulting in the growth of the single-crystalline nanobrush architecture. This study proposes a model for the relationship between defect creation and growth mode in nonequilibrium environments, which enables application of this growth method to novel nanostructure design in a broad range of materials.

| S-EPMC5566339 | biostudies-literature

Fabrication of crystals from single metal atoms.

Project description:Metal nanocrystals offer new concepts for the design of nanodevices with a range of potential applications. Currently the formation of metal nanocrystals cannot be controlled at the level of individual atoms. Here we describe a new general method for the fabrication of multi-heteroatom-doped graphitic matrices decorated with very small, ångström-sized, three-dimensional (3D)-metal crystals of defined size. We irradiate boron-rich precious-metal-encapsulated self-spreading polymer micelles with electrons and produce, in real time, a doped graphitic support on which individual osmium atoms hop and migrate to form 3D-nanocrystals, as small as 15 Å in diameter, within 1 h. Crystal growth can be observed, quantified and controlled in real time. We also synthesize the first examples of mixed ruthenium-osmium 3D-nanocrystals. This technology not only allows the production of ångström-sized homo- and hetero-crystals, but also provides new experimental insight into the dynamics of nanocrystals and pathways for their assembly from single atoms.

| S-EPMC4050283 | biostudies-literature

Interface Energy Alignment between Lead Halide Perovskite Single Crystals and TIPS-Pentacene.

Project description:At present, there is a huge development in optoelectronic applications using lead halide perovskites. Considering that device performance is largely governed by the transport of charges across interfaces and, therefore, the interfacial electronic structure, fundamental investigations of perovskite interfaces are highly necessary. In this study, we use high-resolution soft X-ray photoelectron spectroscopy based on synchrotron radiation to explore the interfacial energetics for the molecular layer of TIPS-pentacene and lead halide perovskite single crystals. We perform ultrahigh vacuum studies on multiple thicknesses of an in situ formed interface of TIPS-pentacene with four different in situ cleaved perovskite single crystals (MAPbI3, MAPbBr3, FAPbBr3, and CsxFA1-xPbBryI3-y). Our findings reveal a substantial shift of the TIPS-pentacene energy levels toward higher binding energies with increasing thickness, while the perovskite energy levels remain largely unaffected regardless of their composition. These shifts can be interpreted as band bending in the TIPS-pentacene, and such effects should be considered when assessing the energy alignment at perovskite/organic transport material interfaces. Furthermore, we were able to follow a reorganization on the MAPbI3 surface with the transformation of the surface C 1s into bulk C 1s.

| S-EPMC10523438 | biostudies-literature

Proton Transfers at a Dopamine-Functionalized TiO2 Interface.

Project description:Despite the many successful syntheses and applications of dopamine-functionalized TiO2 nanohybrids, there has not yet been an atomistic understanding of the interaction of this 1,2-dihydroxybenzene derivative ligand with the titanium dioxide surfaces. In this work, on the basis of a wide set of dispersion-corrected hybrid density functional theory (DFT) calculations and density functional tight binding (DFTB) molecular dynamics simulations, we present a detailed study of the adsorption modes, patterns of growth, and configurations of dopamine on the anatase (101) TiO2 surface, with reference to the archetype of 1,2-dihydroxybenzene ligands, i.e., catechol. At low coverage, the isolated dopamine molecule prefers to bend toward the surface, coordinating the NH2 group to a Ti5c ion. At high coverage, the packed molecules succeed in bending toward the surface only in some monolayer configurations. When they do, we observe a proton transfer from the surface to the ethyl-amino group, forming terminal NH3 + species, which highly interact with the O atoms of a neighboring dopamine molecule. This strong Coulombic interaction largely stabilizes the self-assembled monolayer. On the basis of these results, we predict that improving the probability of dopamine molecules being free to bend toward the surface through thermodynamic versus kinetic growth conditions will lead to a monolayer of fully protonated dopamine molecules.

| S-EPMC6453025 | biostudies-literature

Topology and temperature dependence of the diffuse X-ray scattering in Na0.5Bi0.5TiO3 ferroelectric single crystals.

Project description:The results of high-resolution measurements of the diffuse X-ray scattering produced by a perovskite-based Na0.5Bi0.5TiO3 ferroelectric single crystal between 40 and 620 K are reported. The study was designed as an attempt to resolve numerous controversies regarding the average structure of Na0.5Bi0.5TiO3, such as the mechanism of the phase transitions between the tetragonal, P4bm, and rhombohedral | monoclinic, R3c | Cc, space groups and the correlation between structural changes and macroscopic physical properties. The starting point was to search for any transformations of structural disorder in the temperature range of thermal depoling (420-480 K), where the average structure is known to remain unchanged. The intensity distribution around the {032} pseudocubic reflection was collected using a PILATUS 100K detector at the I16 beamline of the Diamond Light Source (UK). The data revealed previously unknown features of the diffuse scattering, including a system of dual asymmetric L-shaped diffuse scattering streaks. The topology, temperature dependence, and relationship between Bragg and diffuse intensities suggest the presence of complex microstructure in the low-temperature R3c | Cc phase. This microstructure may be formed by the persistence of the higher-temperature P4bm phase, built into a lower-temperature R3c | Cc matrix, accompanied by the related long-range strain fields. Finally, it is shown that a correlation between the temperature dependence of the X-ray scattering features and the temperature regime of thermal depoling is present.

| S-EPMC4747085 | biostudies-literature