Core-Shell Structured Polyamide 66 Nanofibers with Enhanced Flame Retardancy.
Ontology highlight
ABSTRACT:
SUBMITTER: Xiao L
PROVIDER: S-EPMC6640935 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Calcium alginate (Ca-Alg) fibers are renewable fibers obtained from the ocean with essential flame retardancy, which have recently been applied as components of flame-retardant paper. However, the application of Ca-Alg fibers is limited because of their tendency to smolder. Therefore, composites papers were fabricated by blending using flame-retardant polyamide-66 (FR-PA), with a 5 wt% content of phosphorous flame retardant, which will form molten carbon during combustion. When the FR-PA content is 30% of the composite paper, FR-PA forms a compact carbon layer on the surface of the Ca-Alg fibers during combustion, which isolates the mass/heat transfer and effectively suppresses the smoldering of Ca-Alg. This consists of a condensed flame retardant mechanism. Furthermore, the combustion and thermal degradation behavior of paper were analyzed by cone calorimetry (CONE), TG and TG-IR. Ca-Alg in the composite paper decomposed and released CO2 before ignition, which delayed the ignition time. Simultaneously, the FR-PA contained in the composite paper effectively inhibited the combustion of volatile combustibles in the gas phase. Overall, FR-PA and Ca-Alg improve the thermal stability of the composite paper in different temperature regions under air atmosphere. Ca-Alg reduces the formation of aromatic products and NH3 in the composite paper under N2 atmosphere. Ca-Alg-based paper with excellent flame retardancy was successfully prepared.
| S-EPMC7866267 | biostudies-literature
Project description:Polycarbosilane (PCS) was used for surface modification of magnesium hydroxide (MNH) to enhance the flame retardant effectiveness by forming cohesive binding between MgO particles with ceramic adhesive. Chemical interaction and ceramic reaction were revealed between PCS and MNH, which made for a compact, thermal stable and ceramic-like barrier during the combustion of polyethylene (PE). The flame retardancy of PE/MNH/PCS composites was greatly enhanced and a limiting oxygen index (LOI) of 35.0 was achieved at the PCS/MNH ratio of 4/26 in the composite with 30 wt.% PCS modified MNH. Such results were superior in terms of high LOI value at low global content of MNH. Thanks to the better shielding effect of the integrated and self-supporting ceramic char, the peak heat release rate (p-HRR) and the total heat release (THR) of PE/MNH/PCS composites with 50 wt.% PCS modified MNH were remarkably decreased by 36% and 25% in comparison with PE/MNH with 50 wt.% MNH, respectively. The ceramic reaction between PCS and MNH, the superior thermal stability due to crosslinked PCS and the good barrier function of cohesive ceramic layer play important roles in the effective flame retardant mechanism.
| S-EPMC6160472 | biostudies-literature
Project description:The flame retardancy of an engineering plastic, poly(butylene terephthalate) (PBT), with a biobased flame retardant (FR) made from phosphorylated linseed oil (PLO) and phosphorylated downstream corn oil (PCO) was studied. Different phosphorus moieties were incorporated into the vegetable oil backbone through a ring-opening reaction. The chemical structure of the phosphorylated oil was confirmed by Fourier-transform infrared (FTIR) and nuclear resonance magnetic (NMR) spectroscopy. It was found that the incorporation of only 7.5?wt% of PLO was sufficient to change the UL-94 fire class of PBT from non-rating to V-0. The flame-retardancy mechanism of the PBT/PLO blends was evaluated from TGA-FTIR analysis. The combined effects of the gas phase mechanism and the dripping tendency of the blends aided to retard the flame propagation effectively. As the synthesized PLO and PCO contained high free fatty acids, the acid-ester exchange reaction occurred in the blends to form oligomers during the ignition. As a result, the blend dripped immediately and the drips carried all the heat to prevent fire. This work suggests that this sustainable biobased FR could be a desirable alternative to halogen-based FRs for PBT and other engineering polymers to develop more environmentally friendly FR products for various future applications.
| S-EPMC6828712 | biostudies-literature
Project description:A melting phosphorous-based flame retardant (FR) named as diphenyl phosphoryl (DPP)-PEPA is synthesized from 2,6,7-trioxa-1-phosphabicyclo-(2.2.2)-octane-4-methanol (PEPA) and diphenyl phosphoryl chloride. The melting DPP-PEPA FR possesses high thermostability with T 5wt% at 344 °C, which can match the melt-spinning of engineering plastics at high temperatures. The structure of DPP-PEPA is defined by nuclear magnetic resonance and infrared spectrometry. The influences of DPP-PEPA on polyamide 6,6 (PA66) are assessed in terms of rheology parameters and crystallinity. It is observed that the flame retardancy of PA66 is greatly improved when DPP-PEPA is added to the PA66 resin. The results show that the modified PA66 has limited oxygen index as high as 29.4%, and the compact char layers are obviously formed on top of the burned samples. As compared to the pure PA66, the peak heat release rate and the average effective heat of combustion are decreased by 26.5 and 19.3%, respectively. It is obtained that the value of flame retardancy index is 1.4, indicating high efficiency of the entire flame retardancy. Moreover, pyrolysis of DPP-PEPA is carried out at different temperatures for identifying gaseous products and types of flame retardancy.
| S-EPMC8154225 | biostudies-literature
Project description:Core-shell nanofibers have great potential for bio-medical applications such as wound healing dressings where multiple drugs and growth factors are expected to be delivered at different healing phases. Compared to monoaxial nanofibers, core-shell nanofibers can control the drug release profile easier, providing sustainable and effective drugs and growth factors for wound healing. However, it is challenging to produce core-shell structured nanofibers with a high production rate at low energy consumption. Co-axial centrifugal spinning is an alternative method to address the above limitations to produce core-shell nanofibers effectively. In this study, a co-axial centrifugal spinning device was designed and assembled to produce core-shell nanofibers for controlling the release rate of ibuprofen and hEGF in inflammation and proliferation phases during the wound healing process. Core-shell structured nanofibers were confirmed by TEM. This work demonstrated that the co-axial centrifugal spinning is a high productivity process that can produce materials with a 3D environment mimicking natural tissue scaffold, and the specific drug can be loaded into different layers to control the drug release rate to improve the drug efficiency and promote wound healing.
| S-EPMC8230886 | biostudies-literature
Project description:The solid?solid phase transition, poor mechanical properties, and high sensitivity has impeded further practical applications of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX) based polymer bonded explosives (PBXs). To address these issues together, a facile and effective route was employed to achieve a coating of polydopamine (PDA) on the surface of explosive crystals via in situ polymerization of dopamine. Additionally, PBXs based on HMX@PDA microcapsules were prepared with a fluoropolymer as polymer binder. Improved storage modulus, static mechanical strength and toughness, and creep resistance has been achieved in as-prepared PDA modified PBXs. The ?-? phase transition temperature of as-obtained PBXs based on conventional HMX (C-HMX)@PDA was improved by 16.3 °C. The friction sensitivity of the C-HMX based PBXs showed a dramatic drop after the PDA coating. A favorable balance proposed in this paper among thermal stability, mechanical properties, and sensitivity was achieved for C-HMX based PBXs with the incorporation of PDA.
| S-EPMC6473810 | biostudies-literature
Project description:With the aim of understanding and recapitulating cellular interactions of hepatocytes in their physiological microenvironment and to generate an artificial 3D in vitro model, a co-culture system using 3D extrusion bioprinting was developed. A bioink based on alginate and methylcellulose (algMC) was first shown to be suitable for bioprinting of hepatocytes; the addition of Matrigel to algMC enhanced proliferation and morphology of them in monophasic scaffolds. Towards a more complex system that allows studying cellular interactions, we applied core-shell bioprinting to establish tailored 3D co-culture models for hepatocytes. The bioinks were specifically functionalized with natural matrix components (based on human plasma, fibrin or Matrigel) and used to co-print fibroblasts and hepatocytes in a spatially defined, coaxial manner. Fibroblasts acted as supportive cells for co-cultured hepatocytes, stimulating the expression of certain biomarkers of hepatocytes like albumin. Furthermore, matrix functionalization positively influenced both cell types in their respective compartments by enhancing their adhesion, viability, proliferation and function. In conclusion, we established a functional co-culture model with independently tunable compartments for different cell types via core-shell bioprinting. This provides the basis for more complex in vitro models allowing co-cultivation of hepatocytes with other liver-specific cell types to closely resemble the liver microenvironment.
| S-EPMC7933206 | biostudies-literature
Project description:Flame Retardancy Index, FRI, was defined as a simple yet universal dimensionless criterion born out of cone calorimetry data on thermoplastic composites and then put into practice for quantifying the flame retardancy performance of different polymer composites on a set of reliable data. Four types of thermoplastic composites filled with a wide variety of flame retardant additives were chosen for making comparative evaluations regardless of the type and loading level of the additive as well as the irradiance flux. The main features of cone calorimetry including peak of Heat Release Rate (pHRR), Total Heat Release (THR), and Time-To-Ignition (TTI) served to calculate a dimensionless measure that reflects an improvement in the flame retardancy of nominated thermoplastic composites with respect to the neat thermoplastic, quantitatively. A meaningful trend was observed among well-classified ranges of FRI quantities calculated for the studied dataset on thermoplastic composites by which "Poor", "Good", and "Excellent" flame retardancy performances were explicitly defined and exhibited on logarithmic scales of FRI axis. The proposed index remains adaptable to thermoplastic systems whatever the polymer or additive is.
| S-EPMC6473221 | biostudies-literature
Project description:To obtain polyamide 6 (PA6) composites with improved flame retardancy and thermomechanical properties, highly cross-linked supramolecular poly(cyclotriphosphazene)-functionalized ?-zirconium phosphate (f-ZrP) nanoplatelets were synthesized and melt-blended with PA6 in a twin-screw extruder. The performance enhancements of composites were investigated through measuring the dynamic mechanical property and observing cone calorimeter data, toxic gas evolution, and UL-94 rating. The thermomechanical performance of PA6 was increased by 37.2% after composite formation with f-ZrP. As for the fire retardancy performance, compared to neat PA6, the composite containing 10 wt % f-ZrP showed 41.7 and 30.4% decrease in the peak heat and total heat release rates, respectively, and the UL-94 rating of the composite was V-0. Moreover, the thermogravimetric analysis combined with infrared spectroscopy revealed that the addition of f-ZrP to the PA6 led to decrease in the evolution of the volatile compounds and toxic gases, with the formation of highly cross-linked P-N-containing dense char with microspheres, providing a strong barrier to the inhibition of the heat and flammable volatile components transferring between the flame zone area and substrate during the combustion test. Finally, based on the obtained results, the possible mechanisms for improved mechanical and fire retardancy properties of the composites were proposed.
| S-EPMC7301536 | biostudies-literature
Project description:In this study, the synthesis of the core/shell structured diamond/akageneite hybrid particles was performed through one-step isothermal hydrolyzing. The hybrid particle was characterized by X-ray diffraction, field emission scanning electron microscopy, and Fourier transform infrared spectra. The test results overall reveal that the akageneite coating, phase β-FeO(OH), was uniformly coated onto the diamond surface. The polishing performance of the pristine diamond and hybrid particles for the sapphire substrate was evaluated respectively. The experimental results show that the hybrid particles exhibited improved polishing quality and prolonged effective processing time of polishing pad compared with diamond particles without compromising the material remove rate and surface roughness. The improved polishing behavior might be attributed to the β-FeOOH coating, which is conducive to less abrasive shedding and reducing the scratch depth.
| S-EPMC5554054 | biostudies-other