Browse
Submit Data
Databases
API
Help

Dataset Information

5 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Mechanistic Aspects of Wet and Dry CO Oxidation on Co3O4 Nanorod Surfaces: A NAP-UPS Study.

ABSTRACT: Catalytic activity, electronic structure, and the mechanistic aspects of Co3O4 nanorod (NR) surfaces have been explored for CO oxidation in dry and wet atmosphere using near-ambient pressure ultraviolet photoelectron spectroscopy. Presence of water with CO + O2 plummets the catalytic activity because of the change in the electronic nature from predominantly oxide (without water in feed) to a Co3O4 surface covered by a few intermediates. However, at ?375 K, the Co3O4 surface recovers and regains the oxidation activity, at least partially, even in the presence of water. This is fully supported by the changes observed in the work function of Co3O4 under wet (H2O + CO + O2) conditions compared with dry (CO + O2) conditions. This study focuses on the comparative CO oxidation rate on Co3O4 NR surfaces and highlights the changes in the electronic structure that occur in the catalyst during the CO oxidation reaction.

SUBMITTER: Jain R

PROVIDER: S-EPMC6641056 | biostudies-literature | 2017 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Mechanistic Aspects of Wet and Dry CO Oxidation on Co3O4 Nanorod Surfaces: A NAP-UPS Study.

Jain Ruchi R Gnanakumar Edwin S ES Gopinath Chinnakonda S CS

ACS omega 20170307 3

Catalytic activity, electronic structure, and the mechanistic aspects of Co3O4 nanorod (NR) surfaces have been explored for CO oxidation in dry and wet atmosphere using near-ambient pressure ultraviolet photoelectron spectroscopy. Presence of water with CO + O2 plummets the catalytic activity because of the change in the electronic nature from predominantly oxide (without water in feed) to a Co3O4 surface covered by a few intermediates. Howe ...[more]

PMID: 31457474

Similar Datasets

Enhanced hybrid photocatalytic dry reforming using a phosphated Ni-CeO2 nanorod heterostructure.

Project description:Operating the dry reforming reaction photocatalytically presents an opportunity to produce commodity chemicals from two greenhouse gases, carbon dioxide and methane, however, the top-performing photocatalysts presented in the academic literature invariably rely on the use of precious metals. In this work, we demonstrate enhanced photocatalytic dry reforming performance through surface basicity modulation of a Ni-CeO2 photocatalyst by selectively phosphating the surface of the CeO2 nanorod support. An optimum phosphate content is observed, which leads to little photoactivity loss and carbon deposition over a 50-hour reaction period. The enhanced activity is attributed to the Lewis basic properties of the PO43- groups which improve CO2 adsorption and facilitate the formation of small nickel metal clusters on the support surface, as well as the mechanical stability of CePO4. A hybrid photochemical-photothermal reaction mechanism is demonstrated by analyzing the wavelength-dependent photocatalytic activities. The activities, turnover numbers, quantum efficiencies, and energy efficiencies are shown to be on par with other dry-reforming photocatalysts that use noble metals, representing a step forward in understanding how to stabilize ignoble nickel-based dry reforming photocatalysts. The challenges associated with comparing the performance of photocatalysts reported in the academic literature are also commented on.

| S-EPMC10015045 | biostudies-literature

Biomaterials for CO2 Harvesting: From Regulatory Functions to Wet Scrubbing Applications.

Project description:A new series of 2-aminoethyl-benzene-based biomaterials, namely, dopamine (DOP), tyramine (TYR), phenylethylamine (PEA), and epinephrine (EPN), dissolved in dimethylsulfoxide (DMSO) have been investigated for CO2 capture upon activatiing their hydhydrochloride salts with a NaOH pellet. Spectroscopic measurements, including ex situ ATR-FTIR, 1D and 2D NMR experiments have been applied to verify the formation of the sodium carbamate adducts (RR'N-CO2 - Na+). The emergence of new peaks in the IR spectra ranging between 1702 and 1735 cm-1 together with the chemical shift within 157-158 ppm in the 13C NMR, as well as with cross-peaks obtained by 1H-15N HSQC measurements at ca. 84 and 6.6 ppm verified the formation of RR'N-CO2 - Na+ products upon the chemical fixation of CO2. The CO2 sorption capacity of the examined biomaterials was evaluated volumetrically, with a maximum value of 8.18 mmol CO2·g-1 sorbent (36.0 (w/w)%, including both chemisorption and physisorption), for 5 (w/v)% solutions measured at 5 bar CO2 and 25 °C, for TYR and PEA. DFT calculations indicated that the intramolecular hydrogen bonding within the structural motif of EPN-N-CO2 - Na+ adduct provides an exceptional stability compared to monoethanolamine and other structurally related model compounds.

| S-EPMC6682029 | biostudies-literature

Tough adhesives for diverse wet surfaces.

Project description:Adhesion to wet and dynamic surfaces, including biological tissues, is important in many fields but has proven to be extremely challenging. Existing adhesives are cytotoxic, adhere weakly to tissues, or cannot be used in wet environments. We report a bioinspired design for adhesives consisting of two layers: an adhesive surface and a dissipative matrix. The former adheres to the substrate by electrostatic interactions, covalent bonds, and physical interpenetration. The latter amplifies energy dissipation through hysteresis. The two layers synergistically lead to higher adhesion energies on wet surfaces as compared with those of existing adhesives. Adhesion occurs within minutes, independent of blood exposure and compatible with in vivo dynamic movements. This family of adhesives may be useful in many areas of application, including tissue adhesives, wound dressings, and tissue repair.

| S-EPMC5905340 | biostudies-literature

Selective formation of a zwitterion adduct and bicarbonate salt in the efficient CO2 fixation by N-benzyl cyclic guanidine under dry and wet conditions.

Project description:The efficient CO2 fixation by N-benzyl cyclic guanidine 1 was achieved by bubbling dry CO2 through CH3CN at 25 °C for 2 h. In addition, the zwitterion adduct 2 and bicarbonate salt 3 were selectively prepared from 1 under dry (in anhydrous CH3CN) and wet (in CH3CN containing an equimolar amount of water for 1) conditions, respectively. Both compounds 2 and 3 were isolated as white solids and their structures were characterized in detail by elemental analysis, FTIR-ATR, solid-state NMR, TGA, and DFT calculation. These analytical results obviously revealed the formation of a zwitterion adduct and bicarbonate salt from N-benzyl cyclic guanidine and CO2. Especially, the zwitterion adduct of the monocyclic guanidine derivative and CO2 was isolated and characterized for the first time.

| S-EPMC6122324 | biostudies-literature

Controlling selectivities in CO2 reduction through mechanistic understanding.

Project description:Catalytic CO2 conversion to energy carriers and intermediates is of utmost importance to energy and environmental goals. However, the lack of fundamental understanding of the reaction mechanism renders designing a selective catalyst inefficient. Here we show the correlation between the kinetics of product formation and those of surface species conversion during CO2 reduction over Pd/Al2O3 catalysts. The operando transmission FTIR/SSITKA (Fourier transform infrared spectroscopy/steady-state isotopic transient kinetic analysis) experiments demonstrates that the rate-determining step for CO formation is the conversion of adsorbed formate, whereas that for CH4 formation is the hydrogenation of adsorbed carbonyl. The balance of the hydrogenation kinetics between adsorbed formates and carbonyls governs the selectivities to CH4 and CO. We apply this knowledge to the catalyst design and achieve high selectivities to desired products.Understanding the mechanism of CO2 reduction on a catalyst surface is essential for achieving the desired product selectivity. Here, the authors show an operando kinetic analysis of CO2 hydrogenation over a palladium catalyst in order to address the factors governing the selectivity of the process.

| S-EPMC5594010 | biostudies-literature

Sensitivity Enhancement of CO2 Sensors at Room Temperature Based on the CZO Nanorod Architecture.

Project description:Cobalt-doped ZnO (CZO) thin films were deposited on glass substrates at room temperature by radio frequency (RF) magnetron sputtering of a single target prepared with ZnO and Co3O4 powders. Changes in the crystallinity, morphology, optical properties, and chemical composition of the CZO thin films were investigated at various sputtering powers of 45, 60, and 75 W. All samples presented a hexagonal wurtzite-type structure with a preferential c-axis at the (002) plane, along with a distinct change in the strain values through X-ray diffraction patterns. Scanning electron and atomic force microscopy revealed uniform and dense deposition of nanorod CZO samples with a high surface roughness (RMS). The Hall mobility and carrier concentration increased with the introduction of Co+ ions into the ZnO matrix, as seen from the Hall effect study. The gradual increase of the power applied on the target source significantly affected the morphology of the CZO thin film, which is reflected in the CO2-sensing performance. The best gas response to CO2 was recorded for CZO-60 W with a response of 1.45 for 500 ppm CO2, and the response/recovery times were 72 and 35 s, respectively. The distinguishing feature of the CZO sensor is its ability to effectively and rapidly detect the CO2 target gas at room temperature (∼27 °C, RT).

| S-EPMC10964240 | biostudies-literature

Electron tomography and fractal aspects of MoS2 and MoS2/Co spheres.

Project description:A study was made by a combination of 3D electron tomography reconstruction methods and N2 adsorption for determining the fractal dimension for nanometric MoS2 and MoS2/Co catalyst particles. DFT methods including Neimarke-Kiselev's method allowed to determine the particle porosity and fractal arrays at the atomic scale for the S-Mo-S(Co) 2D- layers that conform the spherically shaped catalyst particles. A structural and textural correlation was sought by further characterization performed by x-ray Rietveld refinement and Radial Distribution Function (RDF) methods, electron density maps, computational density functional theory methods and nitrogen adsorption methods altogether, for studying the structural and textural features of spherical MoS2 and MoS2/Co particles. Neimark-Kiselev's equations afforded the evaluation of a pore volume variation from 10 to 110?cm3/g by cobalt insertion in the MoS2 crystallographic lattice, which induces the formation of cavities and throats in between of less than 29?nm, with a curvature radius r k ?<?14.4?nm; typical large needle-like arrays having 20 2D layers units correspond to a model consisting of smooth surfaces within these cavities. Decreasing D P , D B , D I and D M values occur when Co atoms are present in the MoS2 laminates, which promote the formation of smoother edges and denser surfaces that have an influence on the catalytic properties of the S-Mo-S(Co) system.

| S-EPMC5615070 | biostudies-literature

Sustaining dry surfaces under water.

Project description:Rough surfaces immersed under water remain practically dry if the liquid-solid contact is on roughness peaks, while the roughness valleys are filled with gas. Mechanisms that prevent water from invading the valleys are well studied. However, to remain practically dry under water, additional mechanisms need consideration. This is because trapped gas (e.g. air) in the roughness valleys can dissolve into the water pool, leading to invasion. Additionally, water vapor can also occupy the roughness valleys of immersed surfaces. If water vapor condenses, that too leads to invasion. These effects have not been investigated, and are critically important to maintain surfaces dry under water. In this work, we identify the critical roughness scale, below which it is possible to sustain the vapor phase of water and/or trapped gases in roughness valleys - thus keeping the immersed surface dry. Theoretical predictions are consistent with molecular dynamics simulations and experiments.

| S-EPMC4539549 | biostudies-literature

Dry habitats sustain high CO2 emissions from temporary ponds across seasons.

Project description:Despite the increasing understanding of the magnitude and drivers of carbon gas emissions from inland waters, the relevance of water fluctuation and associated drying on their dynamics is rarely addressed. Here, we quantified CO2 and CH4 fluxes from a set of temporary ponds across seasons. The ponds were in all occasion net CO2 emitters irrespective of the presence or absence of water. While the CO2 fluxes were in the upper range of emissions for freshwater lentic systems, CH4 fluxes were mostly undetectable. Dry habitats substantially contributed to these emissions and were always a source of CO2, whereas inundated habitats acted either as a source or a sink of atmospheric CO2 along the year. Higher concentrations of coloured and humic organic matter in water and sediment were linked to higher CO2 emissions. Composition of the sediment microbial community was related both to dissolved organic matter concentration and composition, but we did not find a direct link with CO2 fluxes. The presence of methanogenic archaea in most ponds suggested the potential for episodic CH4 production and emission. Our results highlight the need for spatially and temporally inclusive approaches that consider the dry phases and habitats to characterize carbon cycling in temporary systems.

| S-EPMC5813041 | biostudies-literature

Strong Wet and Dry Adhesion by Cupped Microstructures.

Project description:Recent advances in bio-inspired microfibrillar adhesives have resulted in technologies that allow reliable attachment to a variety of surfaces. Because capillary and van der Waals forces are considerably weakened underwater, fibrillar adhesives are however far less effective in wet environments. Although various strategies have been proposed to achieve strong reversible underwater adhesion, strong adhesives that work both in air and underwater without additional surface treatments have yet to be developed. In this study, we report a novel design-cupped microstructures (CM)-that generates strong controllable adhesion in air and underwater. We measured the adhesive performance of cupped polyurethane microstructures with three different cup angles (15, 30, and 45°) and the same cup diameter of 100 ?m in dry and wet conditions in comparison to standard mushroom-shaped microstructures (MSMs) of the same dimensions. In air, 15°CM performed comparably to the flat MSM of the same size with an adhesion strength (force per real contact area) of up to 1.3 MPa, but underwater, 15°CM achieved 20 times stronger adhesion than MSM (?1 MPa versus ?0.05 MPa). Furthermore, the cupped microstructures exhibit self-sealing properties, whereby stronger pulls lead to longer stable attachment and much higher adhesion through the formation of a better seal.

| S-EPMC6660100 | biostudies-literature