Dataset Information

Drops on a Superhydrophobic Hole Hanging On under Evaporation.

ABSTRACT: Drops with larger volumes placed over a superhydrophobic (SH) surface with a hole do not fall through unless they are evaporated to a size that is small enough. This feature offers the ability to preconcentrate samples for biochemical analysis. In this work, the influence of pinning on the behavior of drops placed on a 0.1 mm thick SH substrate with a 2 mm diameter hole as they evaporated was investigated. With 16 ?L of water dispensed, the sessile drop component volume was initially higher than that of the overhanging drop component and maintained this until the later stages where almost identical shapes were attained and full evaporation was achieved without falling off the hole. With 15 ?L of water dispensed, the volume of the sessile drop was initially higher than that of the overhanging drop component but the liquid body was able to squeeze through the hole after 180 s due to the contact line not having sufficient pinning strength when it encountered the edge of the hole. This resulted in the liquid body either falling through the hole or remaining pinned with an oval-like shape. When it did not fall-off, the liquid body had volume and contact angle characteristics for the sessile drop and overhanging drop components that were reversed. In the later stages, however, nearly identical shapes were again attained and full evaporation was achieved without falling off the hole. The effects of pinning, despite the substrate being SH, offer another path toward achieving practical outcomes with liquid bodies without the need for chemical surface functionalization. Similarities and differences could be seen in the behavior of a sessile drop on a SH plate that was inclined at 30° to the horizontal and evaporated.

SUBMITTER: Chung DCK

PROVIDER: S-EPMC6644627 | biostudies-literature | 2017 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Drops on a Superhydrophobic Hole Hanging On under Evaporation.

Chung Dwayne Chung Kim DCK Huynh So Hung SH Katariya Mayur M Chan Aaron Yin Chun AYC Wang Shufen S Jiang Xuchuan X Muradoglu Murat M Liew Oi Wah OW Ng Tuck Wah TW

ACS omega 20170927 9

Drops with larger volumes placed over a superhydrophobic (SH) surface with a hole do not fall through unless they are evaporated to a size that is small enough. This feature offers the ability to preconcentrate samples for biochemical analysis. In this work, the influence of pinning on the behavior of drops placed on a 0.1 mm thick SH substrate with a 2 mm diameter hole as they evaporated was investigated. With 16 μL of water dispensed, the sessile drop component volume was initially higher than ...[more]

PMID: 31457866

Similar Datasets

Project description:Glioblastoma is a brain tumour frequently used as an experimental model to exploit innovative therapeutic approaches due to its high lethality and refractoriness to therapies. Part of these innovative anticancer therapies address cytoskeletal microtubules (MTs) since specific tubulin post-translational modifications (PTMs) are considered markers of tumour plasticity. In vitro studies, which traditionally employ two-dimensional (2D) culture systems, are now being replaced by three-dimensional (3D) systems that more closely mimic in vivo physiological conditions and allow a better understanding of the signalling between cells. In this work, we compared 2 liquid base 3D methods for the generation of spheroids from C6 rat glioma cells (RGCs) using 30 µL of liquid marble (LM) or the hanging drops (HDs), which contained 2 different cell numbers (5000 or 15,000). After 24 or 48 h of in vitro culture (IVC), the morphology of the spheroids was observed and the behaviour of the two main tubulin PTMs, tyrosinated α-tubulin (Tyr-T) and acetylated α-tubulin (Ac-T), was evaluated by fluorescence and Western blot (WB). RGCs spontaneously formed spherical agglomerates more rapidly in the LM than in the HD system. Cell density influenced the size of the spheroids, which reached a larger size (> of 300 µm Ø), with 15,000 cells compared to 5000 cells (150 µm Ø). Moreover, an increase in Tyr-T and Ac-T was observed in both the HD and LM system from 24 to 48 h, with the highest values shown in the 48 h/LM spheroids of 5000 cells (p < 0.05). In conclusion, by comparing the morphology and microtubular architecture of spheroids from C6 rat glioma cells developed by LM or HD methodology, our findings demonstrate that the use of a fumed silica microbioreactor boosts the induction and maintenance of a high plasticity state in glioma cells. RGCs cultured in LM express levels of tubulin PTMs that can be used to evaluate the efficacy of new anticancer therapies.

Dataset Information

Drops on a Superhydrophobic Hole Hanging On under Evaporation.

Publications

Drops on a Superhydrophobic Hole Hanging On under Evaporation.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets