Browse
Submit Data
Databases
API
Help

Dataset Information

6 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Two-Step Fractionation of a Model Technical Lignin by Combined Organic Solvent Extraction and Membrane Ultrafiltration.

ABSTRACT: A fractionation method for technical lignin was developed, combining organic solvent extraction and membrane ultrafiltration of the solvent soluble component. This method was validated on a commercial wheat straw/Sarkanda grass lignin (Protobind 1000) using 2-butanone (MEK) as the solvent for both the extraction and the ultrafiltration operations. The parent lignin and the different obtained fractions were fully characterized in terms of chemical composition and physicochemical properties by gel permeation chromatography, gas chromatography/mass spectrometry (GC/MS), pyrolysis-GC/MS, total phenol contents, ³¹P nuclear magnetic resonance (³¹P NMR), thermogravimetric analysis, differential scanning calorimetry analysis, and Fourier-transform infrared spectroscopy. The results show that the proposed process allows a straightforward recovery of the different lignin fractions as well as a selective control over their molecular mass distribution and related dependent properties. Moreover, the operating flexibility of the Soxhlet/ultrafiltration process allows the treatment of lignins from different feedstocks using the same installation just by modulating the choice of the solvent and the membrane porosity with the best characteristics. This is one of the most important features of the proposed strategy, which represents a new fractionation approach with the potential to improve lignin valorization for materials science and preparative organic chemistry applications.

SUBMITTER: Allegretti C

PROVIDER: S-EPMC6647992 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Reducing Solvent Consumption in Reductive Catalytic Fractionation through Lignin Oil Recycling.

Project description:Reductive catalytic fractionation (RCF) enables the simultaneous valorization of lignin and carbohydrates in lignocellulosic biomass through solvent-based lignin extraction, followed by depolymerization and catalytic stabilization of the extracted lignin. Process modeling has shown that the use of exogenous organic solvent in RCF is a challenge for economic and environmental feasibility, and previous works proposed that lignin oil, a mixture of lignin-derived monomers and oligomers produced by RCF, can be used as a cosolvent in RCF. Here, we further explore the potential of RCF solvent recycling with lignin oil, extending the feasible lignin oil concentration in the solvent to 100 wt %, relative to the previously demonstrated 0-19 wt % range. Solvents containing up to 80 wt % lignin oil exhibited 83-93% delignification, comparable to 83% delignification with a methanol-water mixture, and notably, using lignin oil solely as a solvent achieved 67% delignification in the absence of water. In additional experiments, applying the RCF solvent recycling approach to ten consecutive RCF reactions resulted in a final lignin oil concentration of 11 wt %, without detrimental impacts on lignin extraction, lignin oil molar mass distribution, aromatic monomer selectivity, and cellulose retention. Overall, this work further demonstrates the potential for using lignin oil as an effective cosolvent in RCF, which can reduce the burden on downstream solvent recovery.

| S-EPMC11351702 | biostudies-literature

Fractionation and DOSY NMR as Analytical Tools: From Model Polymers to a Technical Lignin.

Project description:One key challenge hindering the valorization of lignin is its structural complexity. Artificial lignin-like materials provide a stepping stone between the simplicity of model compounds and the complexity of lignin. Here, we report an optimized synthesis of an all-G β-O-4 polymer 1 designed to model softwood lignin. After acetylation, the polymer Ac-1(V) was fractionated using a protocol that involved only volatile organic solvents, which left no insoluble residue. Using diffusion ordered spectroscopy NMR in combination with gel permeation chromatography, it was revealed that this fractionated material behaved like a flexible linear polymer in solution (average α > 0.5). Acetylated kraft lignin was subsequently processed using the same fractionation protocol. By comparison with the model polymer, we propose that the acetylated kraft lignin is composed of two classes of materials that exhibit contrasting physical properties. One is comparable to the acetylated all-G β-O-4 polymer Ac-1, and the second has a significantly different macromolecular structure.

| S-EPMC6645228 | biostudies-literature

Kumagawa and Soxhlet Solvent Fractionation of Lignin: The Impact on the Chemical Structure.

Project description:We investigated the effects of solvent fractionation on the chemical structures of two commercial technical lignins. We compared the effect of Soxhlet and Kumagawa extraction. The aim of this work was to compare the impact of the methods and of the solvents on lignin characteristics. Our investigation confirmed the potentialities of fractionation techniques in refining lignin properties and narrowing the molecular weight distribution. Furthermore, our study revealed that the Kumagawa process enhances the capacity of oxygenated solvents (ethanol and tetrahydrofuran) to extract lignin that contains oxidized groups and is characterized by higher average molecular weights. Furthermore, the use of tetrahydrofuran after ethanol treatment enabled the isolation of lignin with a higher ratio between carbonyl and other oxidized groups. This result was confirmed by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), 13C NMR and two-dimensional (2D) NMR spectroscopies, gel permeation chromatography (GPC), and analytical pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) analysis. Ultraviolet-visible (UV-vis) spectra evidenced the enrichment in the most conjugated species observed in the extracted fractions. Elemental analyses pointed at the cleavage of C-heteroatom bonds enhanced by the Kumagawa extraction.

| S-EPMC9330082 | biostudies-literature

Fractionation of Technical Lignin from Enzymatically Treated Steam-Exploded Poplar Using Ethanol and Formic Acid.

Project description:Lignocellulosic biorefineries produce lignin-rich side streams with high valorization potential concealed behind their recalcitrant structure. Valorization of these residues to chemicals, materials, and fuels increases the profitability of biorefineries. Fractionation is required to reduce the lignins' structural heterogeneity for further processing. We fractionated the technical biorefinery lignin received after steam explosion and saccharification processes. More homogeneous lignin fractions were produced with high β-O-4' and aromatic content without residual carbohydrates. Non-toxic biodegradable organic solvents like ethanol and formic acid were used for fractionation and can be adapted to the existing biorefinery processes. Macromolecular properties of the isolated fractions were carefully characterized by structural, chemical, and thermal methods. The ethanol organosolv treatment produced highly soluble lignin with a reasonable yield, providing a uniform material for lignin applications. The organosolv fractionation with formic acid and combined ethanol-formic acid produced modified lignins that, based on thermal analysis, are promising as thermoresponsive materials.

| S-EPMC9748740 | biostudies-literature

Enhancing the Antioxidant Activity of Technical Lignins by Combining Solvent Fractionation and Ionic-Liquid Treatment.

Project description:A grass soda technical lignin (PB1000) underwent a process combining solvent fractionation and treatment with an ionic liquid (IL), and a comprehensive investigation of the structural modifications was performed by using high-performance size-exclusion chromatography, 31 P NMR spectroscopy, thioacidolysis, and GC-MS. Three fractions with distinct reactivity were recovered from successive ethyl acetate (EA), butanone, and methanol extractions. In parallel, a fraction deprived of EA extractives was obtained. The samples were treated with methyl imidazolium bromide ([HMIM]Br) by using either conventional heating or microwave irradiation. The treatment allowed us to solubilize 28 % of the EA-insoluble fraction and yielded additional free phenols in all the fractions, as a consequence of depolymerization and demethylation. The gain of the combined process in terms of antioxidant properties was demonstrated through 2,2-diphenyl-1-picrylhydrazyl (DPPH. ) radical-scavenging tests. Integrating further IL safety-related data and environmental considerations, this study paves the way for the sustainable production of phenolic oligomers competing with commercial antioxidants.

| S-EPMC6899661 | biostudies-literature

Investigation of membrane fouling mechanism of intracellular organic matter during ultrafiltration.

Project description:This study investigated the ultrafiltration (UF) membrane fouling mechanism of intracellular organic matter (IOM) from Chlorella vulgaris (CV) and Microcystis aeruginosa (MA). Both CV- and MA-IOM caused severe membrane fouling during UF; however, there were significant differences in the membrane fouling by these two materials. Neutral hydrophilic (N-HPI) compounds were the organics that caused the most severe membrane fouling during CV-IOM filtration, whereas the MA-IOM membrane fouling was induced by mainly hydrophobic (HPO) organics. From an analysis based on Derjaguin-Landau-Verwey-Overbeek theory, it was found that the interaction energy between the membrane and foulants in the later stage of filtration was the major factor determining the efficiency of filtration for both CV-IOM and MA-IOM. The TPI organics in CV-IOM fouled the membrane to a more severe degree during the initial filtration flux; however, when the membrane surface was covered with CV-IOM foulants, the N-HPI fraction of CV-IOM caused the most severe membrane fouling because its attractive energy with the membrane was the highest. For MA-IOM, regardless of the initial filtration flux or the late stage of filtration, the HPO organics fouled the membrane to the greatest extent. An analysis of modified filtration models revealed that cake layer formation played a more important role than other fouling mechanisms during the filtration of CV-IOM and MA-IOM. This study provides a significant understanding of the membrane fouling mechanism of IOM and is beneficial for developing some strategies for membrane fouling control when treating MA and CV algae-laden waters.

| S-EPMC7806927 | biostudies-literature

A Combined Ultrafiltration/Diafiltration Step Facilitates the Purification of Cyanovirin-N From Transgenic Tobacco Extracts.

Project description:The production of biopharmaceutical proteins in plants offers many advantages over traditional expression platforms, including improved safety, greater scalability and lower upstream production costs. However, most products are retained within plant cells or the apoplastic space instead of being secreted into a liquid medium, so downstream processing necessarily involves tissue and cell disruption followed by the removal of abundant particles and host cell proteins (HCPs). We investigated whether ultrafiltration/diafiltration (UF/DF) can simplify the purification of the model recombinant protein cyanovirin-N (CVN), an ~ 11 kDa HIV-neutralizing lectin, from tobacco extracts prior to chromatography. We compared different membrane types and process conditions, and found that at pH 8.0 and 50 mS cm-1 an UF step using a 100 kDa regenerated cellulose membrane removed more than 80% of the ~ 0.75 mg mL-1 total soluble protein present in the clarified plant extract. We recovered ~ 70% of the CVN and the product purity increased ~ 3-fold in the permeate. The underlying effects of tobacco HCP retention during the UF/DF step were investigated by measuring the zeta potential and particle size distribution in the 2-10,000 nm range. Combined with a subsequent 10 kDa DF step, this approach simultaneously reduced the process volume, conditioned the process intermediate, and facilitated early, chromatography-free purification. Due to the generic, size-based nature of the method, it is likely to be compatible with most products smaller than ~50 kDa.

| S-EPMC6334625 | biostudies-literature

Green Extraction of Reed Lignin: The Effect of the Deep Eutectic Solvent Composition on the UV-Shielding and Antioxidant Properties of Lignin.

Project description:Lignin, the second most abundant natural polymer, is a by-product of the biorefinery and pulp and paper industries. This study was undertaken to evaluate the properties and estimate the prospects of using lignin as a by-product of the pretreatment of common reed straw (Phragmites australis) with deep eutectic solvents (DESs) of various compositions: choline chloride/oxalic acid (ChCl/OA), choline chloride/lactic acid (ChCl/LA), and choline chloride/monoethanol amine (ChCl/EA). The lignin samples, hereinafter referred to as Lig-OA, Lig-LA, and Lig-EA, were obtained as by-products after optimizing the conditions of reed straw pretreatment with DESs in order to improve the efficiency of subsequent enzymatic hydrolysis. The lignin was studied using gel penetration chromatography, UV-vis, ATR-FTIR, and 1H and 13C NMR spectroscopy; its antioxidant activity was assessed, and the UV-shielding properties of lignin/polyvinyl alcohol composite films were estimated. The DES composition had a significant impact on the structure and properties of the extracted lignin. The lignin's ability to scavenge ABTS+• and DPPH• radicals, as well as the efficiency of UV radiation shielding, decreased as follows: Lig-OA > Lig-LA > Lig-EA. The PVA/Lig-OA and PVA/Lig-LA films with a lignin content of 4% of the weight of PVA block UV radiation in the UVA range by 96% and 87%, respectively, and completely block UV radiation in the UVB range.

| S-EPMC11312954 | biostudies-literature

Organic solvent extraction-assisted catalytic hydrothermal liquefaction of algae to bio-oil.

Project description:In this paper, we report our investigation into a two-step method of transformation of algae to bio-oil. Elemental analysis, gas chromatography-mass spectrometry and Fourier transform infrared spectroscopy were used to analyze bio-oil. First, organic solvent Soxhlet extraction and reflux extraction were used in the algal extraction step. Ethanol was proven to be the best solvent, and the addition of MgSO4 could transform acids to esters. In MgSO4 extraction oil, the yield of hexadecanoic acid ethyl ester was as high as 48.40%. Then, the residual algae powders through the catalytic hydrothermal liquefaction process were converted to bio-oil. Commercialized noble metal catalysts Pd/C, Pt/C, Ru/C and Rh/C combined with Pd/HZSM-5 were used in the second step. Rh/C performed the best in the catalytic hydrothermal liquefaction process, and the highest bio-oil yield of 50.98% and HHV of 30.67 MJ kg-1 were achieved. The oil yield through two steps was higher than that by a direct decomposition step. Also, the two-step method could achieve a higher energy conversion ratio of 85.61% and total energy of 81.09 kJ.

| S-EPMC9085724 | biostudies-literature

Fractionation of Glycomacropeptide from Whey Using Positively Charged Ultrafiltration Membranes.

Project description:Fractionation of the bovine glycomacropeptide (GMP) from the other proteins in cheese whey was examined using ultrafiltration membranes surface modified to contain positively charged polymer brushes made of polyhexamethylene biguanide. By placing a strong positive charge on a 1000 kDa ultrafiltration membrane and adjusting the pH of whey close to the isoelectric point of GMP, a 14-fold increase in selectivity was observed compared to unmodified membranes. A one stage membrane system gave 90% pure GMP and a three-stage rectification system gave 97% pure GMP. The charged membrane was salt-tolerant up to 40 mS cm-1 conductivity, allowing fractionation of GMP directly from cheese whey without first lowering the whey conductivity by water dilution. Thus, similarly sized proteins that differed somewhat in isoelectric points and were 50?100 fold smaller than the membrane molecular weight cut-off (MWCO), were cleanly fractionated using charged ultrafiltration membranes without water addition. This is the first study to report on the use of salt-tolerant charged ultrafiltration membranes to produce chromatographically pure protein fractions from whey, making ultrafiltration an attractive alternative to chromatography for dairy protein fractionation.

| S-EPMC6210718 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data