Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Highly Efficient Recovery of Vanadium and Chromium: Optimized by Response Surface Methodology.

ABSTRACT: Response surface methodology was applied to optimize the processing parameters (dosage of NaOH, dosage of H2O2, reaction temperature, liquid-to-solid ratio, stirring rate, and reaction time) that affected the leaching process of vanadium and chromium. The results indicated that the leaching process of vanadium was significantly affected by the dosage of NaOH and dosage of H2O2 used in the experiments, whereas the processing parameters affected the leaching efficiency of chromium in the following order: dosage of H2O2 (F) > reaction temperature (C) > dosage of NaOH (A) > reaction time (B) > stirring rate (D) > liquid-to-solid ratio (E). Almost 98.60% of vanadium and 79.82% of chromium were leached out during the leaching process.

SUBMITTER: Peng H

PROVIDER: S-EPMC6648086 | biostudies-literature | 2019 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Highly Efficient Recovery of Vanadium and Chromium: Optimized by Response Surface Methodology.

Peng Hao H Wang Feng F Li Gang G Guo Jing J Li Bing B

ACS omega 20190110 1

Response surface methodology was applied to optimize the processing parameters (dosage of NaOH, dosage of H2O2, reaction temperature, liquid-to-solid ratio, stirring rate, and reaction time) that affected the leaching process of vanadium and chromium. The results indicated that the leaching process of vanadium was significantly affected by the dosage of NaOH and dosage of H2O2 used in the experiments, whereas the processing parameters affected the leac ...[more]

PMID: 31459366

Similar Datasets

Efficient reduction of vanadium (V) with biochar and experimental parameters optimized by response surface methodology.

Project description:Water pollution deteriorates ecosystems and has a great threaten to the environment. The environmental benefits of wastewater treatment are extremely important to minimize pollutants. Here, the biochar purchased from the related industry was used to treat the wastewater which contained high concentration of vanadium (V). The concentration of vanadium was measured by the IC-OES and the results showed that 96.1% vanadium (V) was reduced at selected reaction conditions: the mass ratio of biochar to vanadium of 5.4, reaction temperature of 90 °C, reaction time at 60 min and concentration of H2SO4 of 10 g/L, respectively. Response surface methodology confirmed that all the experimental parameters had positive effect on the reduction of vanadium (V), which could improve the reduction efficiency of vanadium (V) as increased. The influence of each parameter on the reduction process followed the order: A (Concentration of H2SO4) > C (mass ratio of biochar to vanadium) > B (mass ratio of biochar to vanadium). Especially, the mass ratio of biochar to vanadium and concentration of H2SO4 had the greatest influence on the reduction process. This paper provides a versatile strategy for the treatment of wastewater containing vanadium (V) and shows a bright tomorrow for wastewater treatment.

| S-EPMC11372122 | biostudies-literature

Highly Efficient One-Step Protein Immobilization on Polymer Membranes Supported by Response Surface Methodology.

Project description:Immobilization of proteins by covalent coupling to polymeric materials offers numerous excellent advantages for various applications, however, it is usually limited by coupling strategies, which are often too expensive or complex. In this study, an electron-beam-based process for covalent coupling of the model protein bovine serum albumin (BSA) onto polyvinylidene fluoride (PVDF) flat sheet membranes was investigated. Immobilization can be performed in a clean, fast, and continuous mode of operation without any additional chemicals involved. Using the Design of Experiments (DoE) approach, nine process factors were investigated for their influence on graft yield and homogeneity. The parameters could be reduced to only four highly significant factors: BSA concentration, impregnation method, impregnation time, and electron beam irradiation dose. Subsequently, optimization of the process was performed using the Response Surface Methodology (RSM). A one-step method was developed, resulting in a high BSA grafting yield of 955 mg m-2 and a relative standard deviation of 3.6%. High efficiency was demonstrated by reusing the impregnation solution five times consecutively without reducing the final BSA grafting yield. Comprehensive characterization was conducted by X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and measurements of zeta potential, contact angle and surface free energy, as well as filtration performance. In addition, mechanical properties and morphology were examined using mercury porosimetry, tensile testing, and scanning electron microscopy (SEM).

| S-EPMC8804297 | biostudies-literature

Optimization of Coagulation-Flocculation Process in Efficient Arsenic Removal from Highly Contaminated Groundwater by Response Surface Methodology.

Project description:Elevated arsenic (As) contamination in water, especially groundwater, has been recognized as a major problem of catastrophic proportions. This work explores As(V) removal via the coagulation-flocculation process by use of ferric chloride coagulant and polyacrylamide k16 co-coagulant as a first time. The effects of major operating variables such as coagulant dosing (50, 125 and 200 mg/L), co-coagulant dosing (5, 12.5 and 20 mg/L), pH (6, 7and 8), fast mixing time (1, 2 and 3 min), and fast mixing speed (110, 200 and 300 rpm) on As(V) removal efficiency were investigated by a Box-Behnken statistical experiment design (BBD) and response surface methodology (RSM). According to factors F values, coagulant dosing, rapid mixing speed, pH, and co-coagulant dosing showed the most effect on As(V) removal efficiency, and the rapid mixing time factor indicated the slightest effect. The proposed quadratic model was significant with a p value < 0.0001 and has satisfactorily described the experimental data with R2 and adjusted R2 values of 0.9855 and 0.9738, respectively. Predicted model optimal conditions with target of complete As(V) removal were coagulant dosing = 197.63 ppm, co-coagulant dosing = 19.55 ppm, pH = 7.37, fast mixing time = 1.43 min and fast mixing speed = 286.77 rpm. The treatment of Nazarabad well water sample with an initial As(V) concentration of 5 mg/L under the optimal conditions removed 100% As(V) with the volume of produced sludge of 10.7 mL/200 mL. Increasing coagulant dosing, co-coagulant dosing, fast mixing time and fast mixing speed operation parameters from low-level to high-level values indicated 78%, 20%, 10.52% and 9.47% increases in volume of the produced sludge, respectively. However, a reduction of 13.63% in volume of the produced sludge resulted via pH increases.

| S-EPMC9693969 | biostudies-literature

Highly Active Catalysis of Cobalt Tetrakis(pentafluorophenyl)porphyrin Promoted by Chitosan for Cyclohexane Oxidation in Response-Surface-Methodology-Optimized Reaction Conditions.

Project description:We aimed at elevating catalytic performances of cobalt tetrakis(pentafluorophenyl)porphyrin (Co TPFPP) through axial coordination, nanocavities, and covalently grafting action. The Co TPFPP was immobilized onto nanoporous and nonporous chitosan, forming Co TPFPP/np- and nonp-CTS catalysts, respectively. The catalysts were characterized by various spectroscopic techniques. The catalytic performances of these catalysts for cyclohexane oxidation under response-surface-methodology-optimized oxidation reaction conditions were estimated and compared. Co TPFPP/np-CTS was an excellent catalyst at aspect of catalytic activity, exhibiting the considerable potential reusability, 24.2?mol?% yields (KA oil : cyclohexanone and cyclohexanol) in average, and total turnover frequencies (TOFs) of 3.25×106?h-1. This is attributed to the structural characteristics of the Co TPFPP/np-CTS catalyst: the cobalt porphyrin molecules could be highly scattered on CTS, forming the independent active sites, and were not leached. The axial coordination exerted the most important effect on the catalytic activity, and the covalent grafting action had a decisive effect on the increase of the total TOFs and on the reusability of the catalyst.

| S-EPMC6345221 | biostudies-literature

Optimized Production of the Allylamine Antifungal "Terbinafine" by Lysinibacillus Isolate MK212927 Using Response Surface Methodology.

Project description:Purpose:We aimed to optimize the factors affecting the production of the allylamine antifungal, terbinafine, by Lysinibacillus isolate MK212927, a natural producer of this broad-spectrum fungicidal compound. Methods:We employed a central composite design to optimize the five most important variables influencing the production of terbinafine which were carbon source, nitrogen source, temperature, pH and agitation. Results:The optimum conditions were found to be starch 5 g/L, ammonium chloride 5 g/L, temperature 32°C, agitation 150 rpm and pH 7. The actual response (inhibition zone diameter) was highly comparable to the value predicted by the model, indicating a valid model. Using the standard calibration curve of terbinafine, the optimized conditions resulted in an increase in the antifungal metabolite production (terbinafine) by about 1.6-fold (1814.662 µg/mL compared to 1165.550 µg/mL under standardized conditions). Conclusion:This is the first report, to the best of our knowledge, on optimized production of terbinafine by Lysinibacillus species. Hence, these findings may be useful as baseline data for scaling up the production of terbinafine from a natural microbial source.

| S-EPMC7571585 | biostudies-literature

Optimization of chromium and tannic acid bioremediation by Aspergillus niveus using Plackett-Burman design and response surface methodology.

Project description:A chromium and tannic acid resistance fungal strain was isolated from tannery effluent, and identified as Aspergillus niveus MCC 1318 based on its rDNA gene sequence. The MIC (minimum inhibitory concentration) of the isolate against chromium and tannic acid was found to be 200 ppm and 5% respectively. Optimization of physiochemical parameters for biosorption of chromium and tannic acid degradation was carried out by Plackett-Burman design followed by response surface methodology (RSM). The maximum chromium removal and tannic acid degradation was found to be 92 and 68% respectively by A. niveus. Chromium removal and tannic acid degradation was increased up to 11 and 6% respectively after optimization. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) was used to investigate biosorption phenomena.

| S-EPMC5686038 | biostudies-literature

Preparation and in vitro release kinetics of ivermectin sustained-release bolus optimized by response surface methodology.

Project description:Sustained-release formulations of ivermectin (IVM) are useful for controlling parasitic diseases in animals. In this work, an IVM bolus made from microcrystalline cellulose (MCC), starch and low-substituted hydroxypropyl cellulose (LS-HPC) was optimized by response surface methodology. The bolus was dissolved in a cup containing 900 mL of dissolution medium at 39.5 °C, under with stirring at 100 rpm. A quadratic model was formulated using analysis of variance according to the dissolution time. The optimized formulation of the bolus contained 8% MCC, 0.5% starch, and 0.25% LS-HPC. The length, width, and height of the prepared IVM bolus were 28.12 ± 0.14, 16.1 ± 0.13, and 13.03 ± 0.05 mm, respectively. The bolus weighed 11.4842 ± 0.1675 g (with a density of 1.95 g/cm3) and contained 458.26 ± 6.68 mg of IVM. It exhibited in vitro sustained-release for over 60 days, with a cumulative amount and percentage of released IVM of 423.72 ± 5.48 mg and 92.52 ± 1.20%, respectively. The Korsmeyer-Peppas model provided the best fit to the dissolution release kinetics, exhibiting an R2 value close to 1 and the lowest Akaike Information Criterion among different models. The parameter n (0.5180) of the Korsmeyer-Peppas model was between 0.45 and 0.89. It was demonstrated that the release mechanism of the IVM bolus followed a diffusive erosion style.

| S-EPMC6074774 | biostudies-literature

Optimized Production of Fatty Acid Ethyl Esters (FAEE) from Waste Frying Oil by Response Surface Methodology.

Project description:AbstractIn Europe, recent regulations on advanced biofuels have prompted a search for new fuel sources and the development of synthesis methods meeting the demanding specifications of the sector. However, in developing countries such as Algeria, where a significant stock of frying oil is unused, the use of diesel engines powered with waste-oil-derived biofuels must be explored. In this work, the variables related to the transesterification reaction from this frying oil with ethanol are analyzed using response surface methodology. From this analysis, only the reaction time and temperature have been determined as relevant parameters. In addition, FT-IR analysis has proven a useful tool to analyse the conversion in the transesterification reaction of waste frying oil with ethanol and is cheaper and quicker than GC-FID. This sustainable biofuel (FAEE), mixed with a diesel and pure fuel, has been physically characterized. The mixture of FAEE at 30% by volume with diesel meets the requirements demanded in standard EN 590 and can be classified as winter diesel class D. As a pure biofuel, only its high cold flow temperatures could constitute a drawback for exporting to temperate climates but not for internal consumption.Graphical abstract

| S-EPMC7376072 | biostudies-literature

The Optimized Preparation Conditions of Cellulose Triacetate Hollow Fiber Reverse Osmosis Membrane with Response Surface Methodology

Project description: Not available

| S-EPMC10490516 | biostudies-literature

Chromium removal from tannery effluents by adsorption process via activated carbon chat stems (Catha edulis) using response surface methodology.

Project description:ObjectiveIn tannery processing, water consumption is high, which generates wastewater as a by-product and numerous pollutants such as chromium heavy metals that make adverse effects of water bodies and the surrounding environment. This study analyzed, chromium (VI) removal from wastewater through activated carbon chat stem was investigated. Adsorption is a common treatment method via activated carbon due to its cost-effective, profitable, and removal efficiency of these heavy metals.ResultsThe proximate analysis of moisture content of chat stem has 6%, activated carbon ash content of 17.35%, volatile materials of 20.12%, and fixed carbon contents of 56.53%, which are well-matched the standards quality of activated carbon. As the process parameter varies, the increment of the chromium removal efficiency was from 62.5 to 97.03%. The maximum adsorption efficiency was observed at 30 g/L dosage of the adsorbent, at pH 4, and contact time at 180 min of activated carbon from chat stem waste was found 97.03%. FTIR was used to characterize the surface of the chat stem before and after adsorption. Langmuir and Freundlich are used for short contact time's adsorption isotherm 0.9839 and 0.9995 respectively, which conformed, no visible change in the corrosion state.

| S-EPMC8620636 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data