Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation of Hierarchic Porous Films of ?-MnO₂ Nanoparticles by Using the Breath Figure Technique and Application for Hybrid Capacitor Electrodes.

ABSTRACT: The honeycomb-structured film has advantages such as high wettability and high surface area. This structure and properties are suitable for the capacitor electrode. In this study, the electrode structure is controlled by the synthesis of MnO₂ nanoparticles using the breath figure method. The electrode performance was calculated by electrochemical measurements. As a result, the capacitance value was 100.5 F/g at 1 mV s^-1, which was improved 2.7 times as compared with that without structure control.

SUBMITTER: Shimamura N

PROVIDER: S-EPMC6649290 | biostudies-literature | 2019 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Preparation of Hierarchic Porous Films of α-MnO2 Nanoparticles by Using the Breath Figure Technique and Application for Hybrid Capacitor Electrodes.

Shimamura Nobuhiro N Kanda Ryuji R Matsukubo Yuma Y Hirai Yutaro Y Abe Hiroya H Hirai Yuji Y Yoshida Tsukasa T Yabu Hiroshi H Masuhara Akito A

ACS omega 20190221 2

The honeycomb-structured film has advantages such as high wettability and high surface area. This structure and properties are suitable for the capacitor electrode. In this study, the electrode structure is controlled by the synthesis of MnO2 nanoparticles using the breath figure method. The electrode performance was calculated by electrochemical measurements. As a result, the capacitance value was 100.5 F/g at 1 mV s-1, which was improved 2.7 times as compared with that wi ...[more]

PMID: 31459593

Similar Datasets

Breath figure-derived porous semiconducting films for organic electronics.

Project description:Porous semiconductor film morphologies facilitate fluid diffusion and mass transport into the charge-carrying layers of diverse electronic devices. Here, we report the nature-inspired fabrication of several porous organic semiconductor-insulator blend films [semiconductor: P3HT (p-type polymer), C8BTBT (p-type small-molecule), and N2200 (n-type polymer); insulator: PS] by a breath figure patterning method and their broad and general applicability in organic thin-film transistors (OTFTs), gas sensors, organic electrochemical transistors (OECTs), and chemically doped conducting films. Detailed morphological analysis of these films demonstrates formation of textured layers with uniform nanopores reaching the bottom substrate with an unchanged solid-state packing structure. Device data gathered with both porous and dense control semiconductor films demonstrate that the former films are efficient TFT semiconductors but with added advantage of enhanced sensitivity to gases (e.g., 48.2%/ppm for NO2 using P3HT/PS), faster switching speeds (4.7 s for P3HT/PS OECTs), and more efficient molecular doping (conductivity, 0.13 S/m for N2200/PS).

| S-EPMC7096165 | biostudies-literature

Continuous Production of Macroporous Films: an Alternative to Breath Figure Assembly.

Project description:Despite the need for sophisticated instrumentation, breath figure assembly (BFA) methods are restricted to produce macroporous films on a tiny scale so far. The current study narrates the fabrication of macroporous films in hollow fiber geometry which extends to adopt the method for continuous production of isoporous surfaces from commercially available low-priced polymer materials. The fabrication of the films in the hollow fiber geometry is carried out by a co-centric quadruple orifice spinneret through which four different liquids are co-extruded simultaneously: bore fluid (to fill the lumen of the fiber), support layer solution, glycerol, and an isoporous film forming solution through the outer most orifice. The extruded entities plunge into a coagulation bath after passing a definite air gap. The implementation of the concept of diffuse-in, droplet formation, and then condense-out behavior of glycerol in a co-extrusion method of hollow fiber spinning makes macroporous film formation possible in an interminable way sidestepping the use of breath figure assembly method. Moreover, the continuous film formation by the proposed mechanism is also authenticated in flat sheet geometry by employing two casting blades in a casting machine. The structure of the films is analyzed by scanning electron microscopy (SEM).

| S-EPMC5556099 | biostudies-literature

An innovative concept of use of redox-active electrolyte in asymmetric capacitor based on MWCNTs/MnO2 and Fe2O3 thin films.

Project description:In present investigation, we have prepared a nanocomposites of highly porous MnO2 spongy balls and multi-walled carbon nanotubes (MWCNTs) in thin film form and tested in novel redox-active electrolyte (K3[Fe(CN)6] doped aqueous Na2SO4) for supercapacitor application. Briefly, MWCNTs were deposited on stainless steel substrate by "dip and dry" method followed by electrodeposition of MnO2 spongy balls. Further, the supercapacitive properties of these hybrid thin films were evaluated in hybrid electrolyte ((K3[Fe(CN)6 doped aqueous Na2SO4). Thus, this is the first proof-of-design where redox-active electrolyte is applied to MWCNTs/MnO2 hybrid thin films. Impressively, the MWCNTs/MnO2 hybrid film showed a significant improvement in electrochemical performance with maximum specific capacitance of 1012 Fg-1 at 2 mA cm-2 current density in redox-active electrolyte, which is 1.5-fold higher than that of conventional electrolyte (Na2SO4). Further, asymmetric capacitor based on MWCNTs/MnO2 hybrid film as positive and Fe2O3 thin film as negative electrode was fabricated and tested in redox-active electrolytes. Strikingly, MWCNTs/MnO2//Fe2O3 asymmetric cell showed an excellent supercapacitive performance with maximum specific capacitance of 226 Fg-1 and specific energy of 54.39 Wh kg-1 at specific power of 667 Wkg-1. Strikingly, actual practical demonstration shows lightning of 567 red LEDs suggesting "ready-to sell" product for industries.

| S-EPMC5159809 | biostudies-literature

Advances in Fabrication Materials of Honeycomb Structure Films by the Breath-Figure Method.

Project description:Creatures in nature possess almost perfect structures and properties, and exhibit harmonization and unification between structure and function. Biomimetics, mimicking nature for engineering solutions, provides a model for the development of functional surfaces with special properties. Recently, honeycomb structure materials have attracted wide attention for both fundamental research and practical applications and have become an increasingly hot research topic. Though progress in the field of breath-figure formation has been reviewed, the advance in the fabrication materials of bio-inspired honeycomb structure films has not been discussed. Here we review the recent progress of honeycomb structure fabrication materials which were prepared by the breath-figure method. The application of breath figures for the generation of all kinds of honeycomb is discussed.

| S-EPMC5452082 | biostudies-other

A New Free-Standing Aqueous Zinc-Ion Capacitor Based on MnO2-CNTs Cathode and MXene Anode.

Project description:Restricted by their energy storage mechanism, current energy storage devices have certain drawbacks, such as low power density for batteries and low energy density for supercapacitors. Fortunately, the nearest ion capacitors, such as lithium-ion and sodium-ion capacitors containing battery-type and capacitor-type electrodes, may allow achieving both high energy and power densities. For the inspiration, a new zinc-ion capacitor (ZIC) has been designed and realized by assembling the free-standing manganese dioxide-carbon nanotubes (MnO2-CNTs) battery-type cathode and MXene (Ti3C2Tx) capacitor-type anode in an aqueous electrolyte. The ZIC can avoid the insecurity issues that frequently occurred in lithium-ion and sodium-ion capacitors in organic electrolytes. As expected, the ZIC in an aqueous liquid electrolyte exhibits excellent electrochemical performance (based on the total weight of cathode and anode), such as a high specific capacitance of 115.1 F g-1 (1 mV s-1), high energy density of 98.6 Wh kg-1 (77.5 W kg-1), high power density of 2480.6 W kg-1 (29.7 Wh kg-1), and high capacitance retention of ~ 83.6% of its initial capacitance (15,000 cycles). Even in an aqueous gel electrolyte, the ZIC also exhibits excellent performance. This work provides an essential strategy for designing next-generation high-performance energy storage devices.

| S-EPMC7770692 | biostudies-literature

Enhanced outcoupling in down-conversion white organic light-emitting diodes using imprinted microlens array films with breath figure patterns.

Project description:We demonstrate high-performance down-conversion microlens array (DC-MLA) films for white organic light-emitting diodes (OLEDs). The DC-MLA films are readily fabricated by an imprinting method based on breath figure patterns, which are directly formed on the polymer substrate with a novel concept. The DC-MLA films result in high-quality white light as well as enhanced light outcoupling efficiency for white OLEDs. The external quantum efficiency and power efficiency of OLEDs with DC-MLA films are increased by a factor of 1.35 and 1.86, respectively, compared to OLEDs without outcoupling films. Moreover, the white OLEDs with DC-MLA films achieve a high color-rendering index of 84.3. It is anticipated that the novel DC-MLA films fabricated by the simple imprinting process with breath figure patterns can contribute to the development of efficient white OLEDs.

| S-EPMC6346723 | biostudies-literature

Electrostatic potential and valence modulation in La0.7Sr0.3MnO3 thin films.

Project description:The Mn valence in thin film La0.7Sr0.3MnO3 was studied as a function of film thickness in the range of 1-16 unit cells with a combination of non-destructive bulk and surface sensitive X-ray absorption spectroscopy techniques. Using a layer-by-layer valence model, it was found that while the bulk averaged valence hovers around its expected value of 3.3, a significant deviation occurs within several unit cells of the surface and interface. These results were supported by first principles calculations. The surface valence increases to up to Mn3.7+, whereas the interface valence reduces down to Mn2.5+. The change in valence from the expected bulk value is consistent with charge redistribution due to the polar discontinuity at the film-substrate interface. The comparison with theory employed here illustrates how this layer-by-layer valence evolves with film thickness and allows for a deeper understanding of the microscopic mechanisms at play in this effect. These results offer insight on how the two-dimensional electron gas is created in thin film oxide alloys and how the magnetic ordering is reduced with dimensionality.

| S-EPMC6156561 | biostudies-literature

Improved electrochemical performance of defect-induced supercapacitor electrodes based on MnS-incorporated MnO2 nanorods.

Project description:In this paper, we report the effect of MnS nanoparticles on the electrochemical performance of 1D-MnO2 stable nanorods for supercapacitor electrodes. The MnS-incorporated 1D-MnO2 (MnO2/MnS) nanorods were produced using a facile two-step hydrothermal method. Morphological investigation reveals that the incorporation of MnS nanoparticles distorts the lattice fringes and extends the interlayer spacing of the MnO2 nanorods. The structural study showed that MnS modified the structural parameters of the nanocomposite. XPS analysis revealed defects in the nanocomposite due to the generation of oxygen vacancies. The MnO2/MnS nanocomposite improves capacitive performance and has the highest specific capacitance of 305 F g-1, at a current density of 1 A g-1 with an energy density of 5.7 W h kg-1 and a power density of 449 W kg-1. The MnO2/MnS nanocomposite electrodes exhibit exceptional cyclic stability after 5000 charging and discharging cycles. With enhanced specific capacitance and excellent cyclic stability, the MnO2/MnS nanocomposite paves a new way to produce supercapacitor electrodes.

| S-EPMC11302122 | biostudies-literature

Superparamagnetic state in La0.7Sr0.3MnO3 thin films obtained by rf-sputtering.

Project description:A novel superparamagnetic state has been observed in high quality La0.7Sr0.3MnO3 (LSMO) thin films directly grown by rf-sputtering on SiOx/Si(100) substrates. The films are nanostructured without grain boundaries, constituted by locally epitaxial nanoregions grown layer-by-layer with out-of-plane (012) preferential orientation, induced by the constrain of the native silicon oxide. Low magnetic field ZFC-FC magnetization curves show a cross-over from superparamagnetic to ferromagnetic state dependent of the thickness. The thicker film (140 nm) exhibits typical ferromagnetic order. The thinner films (40 and 60 nm) exhibit superparamagnetic behavior attributed to interacting ferromagnetic monodomain nanoregions with critical size, random in-plane oriented, where the inter-monodomain boundaries with surface spin-glass structure regulate the blocking of magnetization depending on the magnetic field intensity. M(H) hysteresis loops showed noticeable coercive fields in all samples, larger than those reported for LSMO. Such properties of half-metal LSMO film foresee potential integration in new Si-technology nanodevices in Spintronics.

| S-EPMC7018749 | biostudies-literature

Interfacial reconstruction in La0.7Sr0.3MnO3 thin films: giant low-field magnetoresistance.

Project description:Herein, interfacial reconstruction in a series of La0.7Sr0.3MnO3 (LSMO) films grown on a (001) oriented LaAlO3 (LAO) substrate using the pulsed plasma sputtering technique is demonstrated. X-ray diffraction studies suggested that the LSMO film on LAO was stabilized in a tetragonal structure, which was relaxed in-plane and strained along the out-of-plane direction. The interfacial reconstruction of the LSMO-LAO interface due to the reorientation of the Mn ion spin induced spin-glass behavior due to the presence of non-collinear Mn ion spins. Consequently, the interface effect was observed on the Curie temperature, temperature-dependent resistivity, metal-to-semiconductor transition temperature, and magnetoresistance (MR). At a magnetic field of 7 T, MR decreased from 99.8% to 7.69% as the LSMO film thickness increased from 200 Å to 500 Å. A unique characteristic of the LSMO films is the large low-field MR after a decrease in the field from the maximum field. The observed temperature-dependent magnetization and low-temperature resistivity upturn of the LSMO films grown on LAO provide direct evidence that the low-field MR is due to the non-collinear interfacial spins of Mn. The present work demonstrates the great potential of interface and large low-field MR, which might advance the fundamental applications of orbital physics and spintronics.

| S-EPMC9418895 | biostudies-literature