Phenotyping Women Based on Dietary Macronutrients, Physical Activity, and Body Weight Using Machine Learning Tools.
Ontology highlight
ABSTRACT:
SUBMITTER: Ramyaa R
PROVIDER: S-EPMC6682952 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:ObjectivesThe carbohydrate-insulin model (CIM) predicts that increases in fasting and post-prandial insulin in response to dietary carbohydrates stimulate energy intake and lower energy expenditures, leading to positive energy balance and weight gain. The objective of the present study was to directly test the CIM's predictions using C57BL/6 mice.MethodsDiets were designed by altering dietary carbohydrates with either fixed protein or fat content and were fed to C57BL/6 mice acutely or chronically for 12 weeks. The body weight, body composition, food intake, and energy expenditures of the mice were measured. Their fasting and post-prandial glucose and insulin levels were also measured. RNA-seq was performed on RNA from the hypothalamus and subcutaneous white adipose tissue. Pathway analysis was conducted using IPA.ResultsOnly the post-prandial insulin and fasting glucose levels followed the CIM's predictions. The lipolysis and leptin signaling pathways in the sWAT were inhibited in relation to the elevated fasting insulin, supporting the CIM's predicted impact of high insulin. However, because higher fasting insulin was unrelated to carbohydrate intake, the overall pattern did not support the model. Moreover, the hypothalamic hunger pathways were inhibited in relation to the increased fasting insulin, and the energy intake was not increased. The browning pathway in the sWAT was inhibited at higher insulin levels, but the daily energy expenditure was not altered.ConclusionsTwo of the predictions were partially supported (and hence also partially not supported) and the other three predictions were not supported. We conclude that the CIM does not explain the impact of dietary macronutrients on adiposity in mice.
| S-EPMC6938849 | biostudies-literature
Project description:As a major health issue, obesity is linked with elevated risk of type 2 diabetes. However, whether disrupted glucose homeostasis is due to altered body composition alone, or whether dietary macronutrients play an additional role, independent of their impact on body composition, remains unclear. We investigated the associations between macronutrients, body composition, blood hormones and glucose homeostasis. We fed C57BL/6N mice 29 different diets with variable macronutrients for 12 weeks. After 10 weeks, intraperitoneal glucose tolerance tests were performed. Generalized linear models were generated to evaluate the impacts of macronutrients, body composition and blood hormones on glucose homeostasis. The area under the glucose curve (AUC) was strongly associated with body fat mass, but not dietary macronutrients. AUC was significantly associated with fasting insulin levels. Six genes from transcriptomic analysis of epididymal white adipose tissue and subcutaneous white adipose tissue were significantly associated with AUC. These genes may encode secreted proteins that play important previously unanticipated roles in glucose homeostasis.
| S-EPMC8288336 | biostudies-literature
Project description:ObjectiveTo develop machine learning models for classifying the severity of opioid overdose events from clinical data.Materials and methodsOpioid overdoses were identified by diagnoses codes from the Marshfield Clinic population and assigned a severity score via chart review to form a gold standard set of labels. Three primary feature sets were constructed from disparate data sources surrounding each event and used to train machine learning models for phenotyping.ResultsRandom forest and penalized logistic regression models gave the best performance with cross-validated mean areas under the ROC curves (AUCs) for all severity classes of 0.893 and 0.882 respectively. Features derived from a common data model outperformed features collected from disparate data sources for the same cohort of patients (AUCs 0.893 versus 0.837, p value = 0.002). The addition of features extracted from free text to machine learning models also increased AUCs from 0.827 to 0.893 (p value < 0.0001). Key word features extracted using natural language processing (NLP) such as 'Narcan' and 'Endotracheal Tube' are important for classifying overdose event severity.ConclusionRandom forest models using features derived from a common data model and free text can be effective for classifying opioid overdose events.
| S-EPMC6622451 | biostudies-literature
Project description:Advances in remote sensing combined with the emergence of sophisticated methods for large-scale data analytics from the field of data science provide new methods to model complex interactions in biological systems. Using a data-driven philosophy, insights from experts are used to corroborate the results generated through analytical models instead of leading the model design. Following such an approach, this study outlines the development and implementation of a whole-of-forest phenotyping system that incorporates spatial estimates of productivity across a large plantation forest. In large-scale plantation forestry, improving the productivity and consistency of future forests is an important but challenging goal due to the multiple interactions between biotic and abiotic factors, the long breeding cycle, and the high variability of growing conditions. Forest phenotypic expression is highly affected by the interaction of environmental conditions and forest management but the understanding of this complex dynamics is incomplete. In this study, we collected an extensive set of 2.7 million observations composed of 62 variables describing climate, forest management, tree genetics, and fine-scale terrain information extracted from environmental surfaces, management records, and remotely sensed data. Using three machine learning methods, we compared models of forest productivity and evaluate the gain and Shapley values for interpreting the influence of categorical variables on the power of these methods to predict forest productivity at a landscape level. The most accurate model identified that the most important drivers of productivity were, in order of importance, genetics, environmental conditions, leaf area index, topology, and soil properties, thus describing the complex interactions of the forest. This approach demonstrates that new methods in remote sensing and data science enable powerful, landscape-level understanding of forest productivity. The phenotyping method developed here can be used to identify superior and inferior genotypes and estimate a productivity index for individual site. This approach can improve tree breeding and deployment of the right genetics to the right site in order to increase the overall productivity across planted forests.
| S-EPMC7068454 | biostudies-literature
Project description:ObjectiveElectronic health records (EHR) offer medical and pharmacogenomics research unprecedented opportunities to identify and classify patients at risk. EHRs are collections of highly inter-dependent records that include biological, anatomical, physiological, and behavioral observations. They comprise a patient's clinical phenome, where each patient has thousands of date-stamped records distributed across many relational tables. Development of EHR computer-based phenotyping algorithms require time and medical insight from clinical experts, who most often can only review a small patient subset representative of the total EHR records, to identify phenotype features. In this research we evaluate whether relational machine learning (ML) using inductive logic programming (ILP) can contribute to addressing these issues as a viable approach for EHR-based phenotyping.MethodsTwo relational learning ILP approaches and three well-known WEKA (Waikato Environment for Knowledge Analysis) implementations of non-relational approaches (PART, J48, and JRIP) were used to develop models for nine phenotypes. International Classification of Diseases, Ninth Revision (ICD-9) coded EHR data were used to select training cohorts for the development of each phenotypic model. Accuracy, precision, recall, F-Measure, and Area Under the Receiver Operating Characteristic (AUROC) curve statistics were measured for each phenotypic model based on independent manually verified test cohorts. A two-sided binomial distribution test (sign test) compared the five ML approaches across phenotypes for statistical significance.ResultsWe developed an approach to automatically label training examples using ICD-9 diagnosis codes for the ML approaches being evaluated. Nine phenotypic models for each ML approach were evaluated, resulting in better overall model performance in AUROC using ILP when compared to PART (p=0.039), J48 (p=0.003) and JRIP (p=0.003).DiscussionILP has the potential to improve phenotyping by independently delivering clinically expert interpretable rules for phenotype definitions, or intuitive phenotypes to assist experts.ConclusionRelational learning using ILP offers a viable approach to EHR-driven phenotyping.
| S-EPMC4261015 | biostudies-literature
Project description:During the last decade, there has been rapid adoption of ground and aerial platforms with multiple sensors for phenotyping various biotic and abiotic stresses throughout the developmental stages of the crop plant. High throughput phenotyping (HTP) involves the application of these tools to phenotype the plants and can vary from ground-based imaging to aerial phenotyping to remote sensing. Adoption of these HTP tools has tried to reduce the phenotyping bottleneck in breeding programs and help to increase the pace of genetic gain. More specifically, several root phenotyping tools are discussed to study the plant's hidden half and an area long neglected. However, the use of these HTP technologies produces big data sets that impede the inference from those datasets. Machine learning and deep learning provide an alternative opportunity for the extraction of useful information for making conclusions. These are interdisciplinary approaches for data analysis using probability, statistics, classification, regression, decision theory, data visualization, and neural networks to relate information extracted with the phenotypes obtained. These techniques use feature extraction, identification, classification, and prediction criteria to identify pertinent data for use in plant breeding and pathology activities. This review focuses on the recent findings where machine learning and deep learning approaches have been used for plant stress phenotyping with data being collected using various HTP platforms. We have provided a comprehensive overview of different machine learning and deep learning tools available with their potential advantages and pitfalls. Overall, this review provides an avenue for studying various HTP platforms with particular emphasis on using the machine learning and deep learning tools for drawing legitimate conclusions. Finally, we propose the conceptual challenges being faced and provide insights on future perspectives for managing those issues.
| S-EPMC9590503 | biostudies-literature
Project description:This work incorporates machine learning (ML) techniques, such as multivariate regression, the multi-layer perceptron, and random forest to predict the slip length at the nanoscale. Data points are collected both from our simulation data and data from the literature, and comprise Molecular Dynamics simulations of simple monoatomic, polar, and molecular liquids. Training and test points cover a wide range of input parameters which have been found to affect the slip length value, concerning dynamical and geometrical characteristics of the model, along with simulation parameters that constitute the simulation conditions. The aim of this work is to suggest an accurate and efficient procedure capable of reproducing physical properties, such as the slip length, acting parallel to simulation methods. Non-linear models, based on neural networks and decision trees, have been found to achieve better performance compared to linear regression methods. After the model is trained on representative simulation data, it is capable of accurately predicting the slip length values in regions between or in close proximity to the input data range, at the nanoscale. Results also reveal that, as channel dimensions increase, the slip length turns into a size-independent material property, affected mainly by wall roughness and wettability.
| S-EPMC8206074 | biostudies-literature
Project description:Hip-worn triaxial accelerometers are widely used to assess physical activity in terms of energy expenditure. Methods for classification in terms of different types of activity of relevance to the skeleton in populations at risk of osteoporosis are not currently available. This publication aims to assess the accuracy of four machine learning models on binary (standing and walking) and tertiary (standing, walking, and jogging) classification tasks in postmenopausal women. Eighty women performed a shuttle test on an indoor track, of which thirty performed the same test on an indoor treadmill. The raw accelerometer data were pre-processed, converted into eighteen different features and then combined into nine unique feature sets. The four machine learning models were evaluated using three different validation methods. Using the leave-one-out validation method, the highest average accuracy for the binary classification model, 99.61%, was produced by a k-NN Manhattan classifier using a basic statistical feature set. For the tertiary classification model, the highest average accuracy, 94.04%, was produced by a k-NN Manhattan classifier using a feature set that included all 18 features. The methods and classifiers within this study can be applied to accelerometer data to more accurately characterize weight-bearing activity which are important to skeletal health.
| S-EPMC9740741 | biostudies-literature
Project description:BackgroundRoot system architecture (RSA) traits are of interest for breeding selection; however, measurement of these traits is difficult, resource intensive, and results in large variability. The advent of computer vision and machine learning (ML) enabled trait extraction and measurement has renewed interest in utilizing RSA traits for genetic enhancement to develop more robust and resilient crop cultivars. We developed a mobile, low-cost, and high-resolution root phenotyping system composed of an imaging platform with computer vision and ML based segmentation approach to establish a seamless end-to-end pipeline - from obtaining large quantities of root samples through image based trait processing and analysis.ResultsThis high throughput phenotyping system, which has the capacity to handle hundreds to thousands of plants, integrates time series image capture coupled with automated image processing that uses optical character recognition (OCR) to identify seedlings via barcode, followed by robust segmentation integrating convolutional auto-encoder (CAE) method prior to feature extraction. The pipeline includes an updated and customized version of the Automatic Root Imaging Analysis (ARIA) root phenotyping software. Using this system, we studied diverse soybean accessions from a wide geographical distribution and report genetic variability for RSA traits, including root shape, length, number, mass, and angle.ConclusionsThis system provides a high-throughput, cost effective, non-destructive methodology that delivers biologically relevant time-series data on root growth and development for phenomics, genomics, and plant breeding applications. This phenotyping platform is designed to quantify root traits and rank genotypes in a common environment thereby serving as a selection tool for use in plant breeding. Root phenotyping platforms and image based phenotyping are essential to mirror the current focus on shoot phenotyping in breeding efforts.
| S-EPMC6977263 | biostudies-literature
Project description:Meiotic maturation is a crucial step of oocyte formation, allowing its potential fertilization and embryo development. Elucidating this process is important for both fundamental research and assisted reproductive technology. However, few computational tools based on non-invasive measurements are available to characterize oocyte meiotic maturation. Here, we develop a computational framework to phenotype oocytes based on images acquired in transmitted light. We trained neural networks to segment the contour of oocytes and their zona pellucida using oocytes from diverse species. We defined a comprehensive set of morphological features to describe an oocyte. These steps were implemented in an open-source Fiji plugin. We present a feature-based machine learning pipeline to recognize oocyte populations and determine morphological differences between them. We first demonstrate its potential to screen oocytes from different strains and automatically identify their morphological characteristics. Its second application is to predict and characterize the maturation potential of oocytes. We identify the texture of the zona pellucida and cytoplasmic particle size as features to assess mouse oocyte maturation potential and tested whether these features were applicable to the developmental potential of human oocytes. This article has an associated First Person interview with the first author of the paper.
| S-EPMC9377708 | biostudies-literature