Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Filter paper supported nZVI for continuous treatment of simulated dyeing wastewater.

ABSTRACT: In this study, polyacrylic acid modified filter paper (FP/PAA) was synthesized by in-situ polymerization of acrylic acid, which was used as a matrix to chelate nano-scale zero valent iron (nZVI). The loading content of nZVI in the filter paper reached 24.8%. The fabricated composite FP/PAA/nZVI was characterized by SEM, FT-IR and TGA respectively. Moreover, it was used for the removal of methyl blue and methylene blue as model anionic and cationic dyes. The effect of initial dye concentration on decolorization efficiency was investigated. The results showed that FP/PAA/nZVI enhanced the removal of dye from the simulated dye wastewater and the decolorization efficiency exceeded 95% for the dye solutions lower than 20?mg/L. More importantly, the filter paper supported nZVI realized the continuous treatment of simulated dye wastewater by a simple filtration process. This study hopes to serve as a basis for the application of nZVI in textile wastewater treatment.

SUBMITTER: Yu P

PROVIDER: S-EPMC6683194 | biostudies-literature | 2019 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Filter paper supported nZVI for continuous treatment of simulated dyeing wastewater.

Yu Pingping P Yu Haifan H Sun Qisong Q Ma Bomou B

Scientific reports 20190805 1

In this study, polyacrylic acid modified filter paper (FP/PAA) was synthesized by in-situ polymerization of acrylic acid, which was used as a matrix to chelate nano-scale zero valent iron (nZVI). The loading content of nZVI in the filter paper reached 24.8%. The fabricated composite FP/PAA/nZVI was characterized by SEM, FT-IR and TGA respectively. Moreover, it was used for the removal of methyl blue and methylene blue as model anionic and cationic dyes. The effect of initial dye concentration on ...[more]

PMID: 31383919

Similar Datasets

Fate of fluorescent core-shell silica nanoparticles during simulated secondary wastewater treatment.

Project description:Increasing use of silica nanoparticles (SiO2 NPs) in consumer products and industrial processes leads to SiO2 NP discharge into wastewater. Thus, there is a need to understand the fate of SiO2 NPs during wastewater treatment. However, the detection of SiO2 NPs in environmental systems is hindered by the elevated background levels of natural silicon. In this work, laboratory-synthesized fluorescent core-shell SiO2 NPs were used to study the fate of these NPs during secondary wastewater treatment. Fluorescent measurements provided an easy and fast method for SiO2 NP tracking. A laboratory-scale activated sludge system consisting of an aeration tank and a settler was fed with synthetic wastewater containing ca. 7.5 mg L(-1) of fluorescent SiO2 NPs for 30 days. SiO2 NPs were effectively removed from the wastewater (>96%) during the first 6 days, however the concentration of SiO2 NPs in the effluent gradually increased afterwards and the NP discharge was as high as 65% of the input after 30 days of NP dosing. The poor removal of the SiO2 NPs was related to the high colloidal stability of the NPs in the wastewater and their limited propensity to biosorption. Although some degree of NP adsorption on the biomass was observed using fluorescence microscopy, the affinity of SiO2 NPs for the activated sludge was not enough for a sustained and effective removal of the SiO2 NPs from the wastewater.

| S-EPMC4426230 | biostudies-literature

Characterization of efficient xylanases from industrial-scale pulp and paper wastewater treatment microbiota.

Project description:Xylanases are widely used enzymes in the food, textile, and paper industries. Most efficient xylanases have been identified from lignocellulose-degrading microbiota, such as the microbiota of the cow rumen and the termite hindgut. Xylanase genes from efficient pulp and paper wastewater treatment (PPWT) microbiota have been previously recovered by metagenomics, assigning most of the xylanase genes to the GH10 family. In this study, a total of 40 GH10 family xylanase genes derived from a certain PPWT microbiota were cloned and expressed in Escherichia coli BL21 (DE3). Among these xylanase genes, 14 showed xylanase activity on beechwood substrate. Two of these, PW-xyl9 and PW-xyl37, showed high activities, and were purified to evaluate their xylanase properties. Values of optimal pH and temperature for PW-xyl9 were pH 7 and 60 ℃, respectively, while those for PW-xyl37 were pH 7 and 55 ℃, respectively; their specific xylanase activities under optimal conditions were 470.1 U/mg protein and 113.7 U/mg protein, respectively. Furthermore, the Km values of PW-xyl9 and PW-xyl37 were determined as 8.02 and 18.8 g/L, respectively. The characterization of these two xylanases paves the way for potential application in future pulp and paper production and other industries, indicating that PPWT microbiota has been an undiscovered reservoir of efficient lignocellulase genes. This study demonstrates that a metagenomic approach has the potential to screen efficient xylanases of uncultured microorganisms from lignocellulose-degrading microbiota. In a similar way, other efficient lignocellulase genes might be identified from PPWT treatment microbiota in the future.

| S-EPMC7815853 | biostudies-literature

Toward Continuous Monitoring of Breath Biochemistry: A Paper-Based Wearable Sensor for Real-Time Hydrogen Peroxide Measurement in Simulated Breath.

Project description:Exhaled breath contains a large amount of biochemical and physiological information concerning one's health and provides an alternative route to noninvasive medical diagnosis of diseases. In the case of lung diseases, hydrogen peroxide (H2O2) is an important biomarker associated with asthma, chronic obstructive pulmonary disease, and lung cancer and can be detected in exhaled breath. The current method of breath analysis involves condensation of exhaled breath, is not continuous or real time, and requires two separate and bulky devices, complicating the periodic or long-term monitoring of a patient. We report the first disposable paper-based electrochemical wearable sensor that can monitor exhaled H2O2 in artificial breath calibration-free and continuously, in real time, and can be integrated into a commercial respiratory mask for on-site testing of exhaled breath. To improve precision for sensing H2O2, we perform differential electrochemical measurement by amperometry in which screen-printed Prussian Blue-mediated and nonmediated carbon electrodes are used for differential analysis. We were able to measure H2O2 in simulated breath in a concentration-dependent manner in real time, confirming its functionality. This proposed system is versatile, and by modifying the chemistry of the sensing electrodes, our method of differential sensing can be extended to continuous monitoring of other analytes in exhaled breath.

| S-EPMC6879172 | biostudies-literature

Cellulose-Derived Supercapacitors from the Carbonisation of Filter Paper.

Project description:Advanced carbon materials are important for the next-generation of energy storage apparatus, such as electrochemical capacitors. Here, the physical and electrochemical properties of carbonised filter paper (FP) were investigated. FP is comprised of pure cellulose and is a standardised material. After carbonisation at temperatures ranging from 600 to 1700?°C, FP was contaminant-free, containing only carbon and some oxygenated species, and its primary fibre structure was retained (diameter ?20-40??m). The observed enhancement in conductivity of the carbonised FP was correlated with the carbonisation temperature. Electrochemical capacitance in the range of ?1.8-117?F?g(-1) was achieved, with FP carbonised at 1500?°C showing the best performance. This high capacitance was stable with >87?% retained after 3000 charge-discharge cycles. These results show that carbonised FP, without the addition of composite materials, exhibits good supercapacitance performance, which competes well with existing electrodes made of carbon-based materials. Furthermore, given the lower cost and renewable source, cellulose-based materials are the more eco-friendly option for energy storage applications.

| S-EPMC4608524 | biostudies-literature

Long-term continuous treatment of non-sterile real hospital wastewater by Trametes versicolor.

Project description:Background:Hospital wastewater is commonly polluted with high loads of pharmaceutically active compounds, which pass through wastewater treatment plants (WWTPs) and end up in water bodies, posing ecological and health risks. White-rot fungal treatments can cope with the elimination of a wide variety of micropollutants while remaining ecologically and economically attractive. Unfortunately, bacterial contamination has impeded so far a successful implementation of fungal treatment for real applications. Results:This work embodied a 91-day long-term robust continuous fungal operation treating real non-sterile hospital wastewater in an air pulsed fluidized bed bioreactor retaining the biomass. The hydraulic retention time was 3?days and the ageing of the biomass was avoided through partial periodic biomass renovation resulting in a cellular retention time of 21?days. Evolution of microbial community and Trametes abundance were evaluated. Conclusions:The operation was able to maintain an average pharmaceutical load removal of over 70% while keeping the white-rot fungus active and predominant through the operation.

| S-EPMC6542094 | biostudies-literature

High-Performance Virus Removal Filter Paper for Drinking Water Purification.

Project description:Access to drinking water is one of the greatest global challenges today. In this study, the virus removal properties of mille-feuille nanocellulose-based filter papers of varying thicknesses from simulated waste water (SWW) matrix are evaluated for drinking water purification applications. Filtrations of standard SWW dispersions at various total suspended solid (TSS) content are performed, including spiking tests with 30 nm surrogate latex particles and 28 nm ?X174 bacteriophages. Filter papers of thicknesses 9 and 29 µm are used, and the filtrations are performed at two different operational pressures, i.e., 1 and 3 bar. The presented data using SWW matrix show, for the first time, that a filter paper made from 100% nanocellulose has the capacity to efficiently remove even the smallest viruses, i.e., up to 99.9980-99.9995% efficiency, at industrially relevant flow rates, i.e., 60-500 L m-2 h-1, and low fouling, i.e., V max > 103-104 L m-2. The filter paper presented in this work shows great promise for the development of robust, affordable, and sustainable water purification systems.

| S-EPMC6607295 | biostudies-literature

A combined system of microbial fuel cell and intermittently aerated biological filter for energy self-sufficient wastewater treatment.

Project description:Energy self-sufficiency is a highly desirable goal of sustainable wastewater treatment. Herein, a combined system of a microbial fuel cell and an intermittently aerated biological filter (MFC-IABF) was designed and operated in an energy self-sufficient manner. The system was fed with synthetic wastewater (COD?=?1000?mg L(-1)) in continuous mode for more than 3 months at room temperature (~25?°C). Voltage output was increased to 5?±?0.4 V using a capacitor-based circuit. The MFC produced electricity to power the pumping and aeration systems in IABF, concomitantly removing COD. The IABF operating under an intermittent aeration mode (aeration rate 1000?±?80 mL h(-1)) removed the residual nutrients and improved the water quality at HRT?=?7.2 h. This two-stage combined system obtained 93.9% SCOD removal and 91.7% TCOD removal (effluent SCOD?=?61?mg L(-1), TCOD?=?82.8?mg L(-1)). Energy analysis indicated that the MFC unit produced sufficient energy (0.27?kWh m(-3)) to support the pumping system (0.014?kWh m(-3)) and aeration system (0.22?kWh m(-3)). These results demonstrated that the combined MFC-IABF system could be operated in an energy self-sufficient manner, resulting to high-quality effluent.

| S-EPMC4678297 | biostudies-other

Paper-supported 3D cell culture for tissue-based bioassays.

Project description:Fundamental investigations of human biology, and the development of therapeutics, commonly rely on 2D cell-culture systems that do not accurately recapitulate the structure, function, or physiology of living tissues. Systems for 3D cultures exist but do not replicate the spatial distributions of oxygen, metabolites, and signaling molecules found in tissues. Microfabrication can create architecturally complex scaffolds for 3D cell cultures that circumvent some of these limitations; unfortunately, these approaches require instrumentation not commonly available in biology laboratories. Here we report that stacking and destacking layers of paper impregnated with suspensions of cells in extracellular matrix hydrogel makes it possible to control oxygen and nutrient gradients in 3D and to analyze molecular and genetic responses. Stacking assembles the "tissue", whereas destacking disassembles it, and allows its analysis. Breast cancer cells cultured within stacks of layered paper recapitulate behaviors observed both in 3D tumor spheroids in vitro and in tumors in vivo: Proliferating cells in the stacks localize in an outer layer a few hundreds of microns thick, and growth-arrested, apoptotic, and necrotic cells concentrate in the hypoxic core where hypoxia-sensitive genes are overexpressed. Altering gas permeability at the ends of stacks controlled the gradient in the concentration of the O(2) and was sufficient by itself to determine the distribution of viable cells in 3D. Cell cultures in stacked, paper-supported gels offer a uniquely flexible approach to study cell responses to 3D molecular gradients and to mimic tissue- and organ-level functions.

| S-EPMC2773961 | biostudies-literature

Cost analysis for computer supported multiple-choice paper examinations.

Project description:INTRODUCTION: Multiple-choice-examinations are still fundamental for assessment in medical degree programs. In addition to content related research, the optimization of the technical procedure is an important question. Medical examiners face three options: paper-based examinations with or without computer support or completely electronic examinations. Critical aspects are the effort for formatting, the logistic effort during the actual examination, quality, promptness and effort of the correction, the time for making the documents available for inspection by the students, and the statistical analysis of the examination results. METHODS: Since three semesters a computer program for input and formatting of MC-questions in medical and other paper-based examinations is used and continuously improved at Wuerzburg University. In the winter semester (WS) 2009/10 eleven, in the summer semester (SS) 2010 twelve and in WS 2010/11 thirteen medical examinations were accomplished with the program and automatically evaluated. For the last two semesters the remaining manual workload was recorded. RESULTS: The cost of the formatting and the subsequent analysis including adjustments of the analysis of an average examination with about 140 participants and about 35 questions was 5-7 hours for exams without complications in the winter semester 2009/2010, about 2 hours in SS 2010 and about 1.5 hours in the winter semester 2010/11. Including exams with complications, the average time was about 3 hours per exam in SS 2010 and 2.67 hours for the WS 10/11. DISCUSSION: For conventional multiple-choice exams the computer-based formatting and evaluation of paper-based exams offers a significant time reduction for lecturers in comparison with the manual correction of paper-based exams and compared to purely electronically conducted exams it needs a much simpler technological infrastructure and fewer staff during the exam.

| S-EPMC3244735 | biostudies-other